User talk:MoviePropMaster2008 (Archive): Difference between revisions

Revision as of 01:12, 19 May 2009

Most of my uploaded firearms pics were photographed by me and thus offered for use by IMFDB with my permission.

BTW: Please IDENTIFY yourself when you leave a message. I shouldn't have to sleuth your identity through the Wiki/History page to figure out who asked what. ;) Thanks.

AMT Automag

I created a new page for the AMT Automag as the Automag III and Automag IV are completely separate designs than the .357 Auto Mag pistol that I have had the luck to be able to examine. Also AMT was never involved in manufacturing the origional Auto Mag pistol. Basically they were useing the name for marketing purposes. I'm just giving my reasoning. Rockwolf66 18:03, 16 March 2009 (UTC)

As I don't have an form of Automag to examine again in person(of the three different models I have examined two were of questionable origin and the third was out of my pricerange). I have been looking up both the Auto mag and the AMT Automag Models. The Automag Mosels look to be based on Longslide M1911s rather than the AMC Automag. If you look at the control layout the AMC model and the AMT Models have vastly differety control setups.Rockwolf66

Sentinel Arms Stryker

Dear Sir, I was wondering if you had any information about the Sentinel Arms Stryker that is shown on the Desparado page. I know it's an Armsel Striker varient but I don't know enough about it to say anything about it on the Armsel striker page. I've also seen a Striker Varient made by Penn Arms and i want to know what the differance is. Rockwolf66

Wesley's Beretta

Hi, I am requesting a picture of Wesley's Beretta 92S used in Wanted (2008). If you don't mind.GunnutHk

US Navy Mark 12 MOD X Special Purpose Rifle

Hi I was referred by MT2008 that you may have access to a MK 12 SPR or a similar weapon. If you have access to an image to add to the Mk 12 SPR section of the M16 page that would be appreciated. The current image has a watermark and is a graphic from somewhere and probably copyrighted so It would be cool if that image could be replaced. thanks, -User:AdAstra2009

Well thanks for looking into it, I appreciate it -User:AdAstra2009

YES!

Thank you SO much! Those look great, and actually, they look very close to the ones that have appeared in quite a few movies. We can start replacing the two-tone SIG pics that we have on our other pages with these immediately! Again, I greatly appreciate you doing this for me. How will I ever repay you?

Out of curiosity, since you told me that they usually don't fit, how did you make them work together? -MT2008

Re: MP5A5

Huh, that's interesting. I always figured Stembridge would have mostly -90 series guns that looked just like those "MP5s" that appear in so many productions they've rented to. Any idea why those HK94s were never converted further to make them look like more realistic MP5s? As my Air Force One page shows, Stembridge basically left those guns as-is well into the 1990s.

Thanks for the MP5A5 picture...I was actually close to replacing it myself (albeit with something from a Google image search). And yes, I'm sure more people than me appreciate them! At least, I hope so. You're pretty much the most important person we've got when it comes to gun images. I mean, how many sites out there get to have pictures of the same prop weapons used in many films?

Thanks for the new pictures

You've uploaded a lot of good pictures recently...I especially like the S&W 4506 and the SIG P220 Sport (is that the one from Cinema Weaponry that's appeared in several movies?) I thought of taking a picture of my own personal 4506 for a while, but gave up because I knew I couldn't take one as good as what you could do. -MT2008

One other thing...

I know I keep asking for stuff from you lately, but this time it's talk only.

I just finished working on the Air Force One page for this site. That movie features some type of short-barreled AK which looks just like the one from True Lies. Here's a picture:

Error creating thumbnail: File missing

The next time you talk to Harry Lu, would you mind asking him what these guns are and who owns them (Stembridge?) Thanks! -MT2008

Re:

The new pictures are really cool, as usual. I especially love the M16A1 with A2 handguards picture, because there are a lot of Hollywood movies featuring guns with that config, and it's great that we now have a picture to prove to our visitors how you sneaky armorers have deceived so many of us common folk action movie fans with those fake M16A2s! Haha, just kidding. Anyway, how did you get your hands on a Diemaco? Remember Al Vrkljan, the Canadian armorer who helped me out on The Incredible Hulk (2008)? He told me that Diemaco/Colt Canada wouldn't sell any of their guns to his company or any civilian companies, so where did it come from?

Also, you brought up an interesting point on the American Gun (2006) page...as an armorer who works in the film industry, how do you feel about the anti-gun attitudes that seem so prevalent in Hollywood? Does it ever frustrate you and make you not want to rent your guns out to people who are so overtly anti-RKBA? I've always wondered how armorers feel about the people they work with.

Appreciate the effort on the Type 84 and two-tone P226 pics. Whenever you get a chance!

What do you think...

...of the article on the Colt Flare Launcher? -MT2008

Trust me, I'm not offended. I respect and share your commitment to ensuring accuracy on this site, especially since you're obviously far more qualified to talk about guns in film (and guns in general) than I will ever be. -MT2008

Oh, yes, and one other request...

I have another request, this one a bit more unusual. I recently did a page for 2 Fast 2 Furious, which features a two-tone SIG P226 of West German manufacture that has a stainless frame and a regular black slide and barrel. It looks like the armorer just combined two existing guns to make it (since the two-tone P226s usually have black frame and stainless slide), and I'd love to have a picture of something identical for my page. So if you ever get out those two P226s that you photographed for IMFDB back in June, do you mind combining this:

Error creating thumbnail: File missing

..and this...

Error creating thumbnail: File missing

...to make this?

Error creating thumbnail: File missing

...and then taking a picture of it for me? Also, if you put the slide and barrel from the stainless P226 on the frame of the black P226, you'd have a gun identical to the one from Face/Off which we could use for that page.

Now THAT is news to me. I'm really surprised...finishes really make the fit of the parts THAT difficult? Wow. I don't think the gun above is a factory job because the two-tone P226s that SIG has sold are always black frame and stainless slide, not the other way around. Do you by chance know who supplied the weapons for 2 Fast 2 Furious?

Thanks for the info, as always.

Re: Back for a bit

I do think you're right and that there are some SKS rifles in Platoon (which may or may not be Chinese Type 56 copies, for all I know). I own that movie on DVD, so as soon as I get back to my place, I'm gonna have to pop it in my laptop and watch again to be sure. Also, thanks for backing me up on the CAR-15 variants in the film - I was pretty sure they were 653s, and I know that particular model was exported in large numbers to U.S. allies during the 1970s (if you ever check out any Arab-Israeli war photos from the news, even today, you'll see many IDF personnel using them).

I was also suspicious of the "MAC-9" page, because I have never heard of that variant. On the other hand, I had no idea that the 9mm variant of the MAC-10 was called the "MAC-10/9"; I've usually just heard it referred to as a MAC-10. I figure "MAC-9" was just somebody butchering the spelling of "M11/9", which has appeared in lots of movies (I made the entry for that gun under the MAC-10 page myself, though someone else put down - inaccurately - that it was used in Blue Streak).

Sorry to hear Josh Brolin broke a gun...indeed, how DO you bend a trigger guard? Then again, he's had some issues with the law lately, so maybe it's not too surprising. What film is he working on that required him to carry a Police Chief Special, anyway? Some period piece, I take it? I don't know how frustrating it is to be an armorer, but I can imagine...I mean, if you've rented out dozens of guns to one production, doesn't that make you lose your nerve to think how much those guns must be getting tossed around, even with armorers on-set to supervise their use? Also, remember when you sent me that picture of guns to ID from your vault? How many did I get right?

That's cool if you can get a picture of a Chinese Tokarev. Later. -MT2008

Tokarev

MP2008,

Nice to see you're back on the site! Hope you've seen some of GunMaster45's recent work (especially on Heartbreak Ridge and Platoon.

Anyway, I'm curious...do you by chance have a Chinese Type 54 copy of a Tokarev in your company's inventory? I ask only because I've seen those in quite a few movies, and I figure we should have a picture of one for this site. Also, I thought that only Chinese Tokarevs have the frame-mounted safety? I have little experience with them, but I thought I remembered reading that...please educate me if I'm wrong!

Re: A pic and an update

Good lord, is that what Heaven on Earth looks like? I can see (from left to right), an AR with a triangular forearm (M16A1 or AR15 SP1, I can't tell, but the selector appears to be on semi!), an FN MAG, an MP5A2 with slim forearm, a shorty AR with a 10" barrel, an AKM variant, an FN Minimi, a G36E, two AR carbines with what appear to be 14.5"+ barrels, what I believe to be an MG3 and an MG42, and then a PK or PKM. Behind the MG3, I see the barrel shroud of what might be an M1919, but I can't tell for sure. All I know is that I seriously hope my own safe looks like that...some day (as it stands, my GSA-imported Chinese AK is the only "evil"-looking gun I own).

As far as changing the pages...totally fine. I never intended to leave our conversations on there permanently...only long enough to make sure that the guns were properly identified. Of course, I'm quickly learning that you're usually right!

Sorry you've got so many guns to clean...I've heard stories about the way that blanks wear guns in comparison to live rounds, so I know how busy you must be! As far as replacement parts go, please replace that slim forearm on the MP5 (which I see has a tag). I've always found those slim forearms on ANY H&K long gun to be annoying because I can't get a comfortable grip on them; they're just way too narrow (and this is coming from a guy with pretty small hands!) I imagine anyone who has to fire hundreds of rounds out of that gun (until the director gets a satisfying take of an action scene) would also start to hate it.

Haha...thanks for the vault picture. Talk to you later. -MT2008

Long-barreled AK under-folder

Here is the gun from The X-Files I mentioned to you. Found these on a fan site for the show. They're not great quality, but you can see it pretty well:

File:X-files-Type84-4.jpg

Error creating thumbnail: File missing

File:X-files-Type84-2.jpg

File:X-files-Type84.jpg

(This one is from a different episode)

It's clearly an under-folder, it has a long barrel, but it also has what appears to be a .223 mag. And it seems to have a hooded front sight in the first pic. Any idea what this might be? It's appeared in several episodes of the show from a couple of seasons, and I always thought it was a Type 84 under-folder fitted with the barrel from an RPK clone. -MT2008

Mike Sudrow is listed on IMDB as having worked on a few episodes of The X-Files. Since the show lasted so long (nine years), I imagine they probably had many, many different armorers depending on the season/filming location.

As far as Canadian armorers go, Al Vrkljan of Movie Armaments Group was on here a couple months ago. He corrected me on the Incredible Hulk page by telling me that, interestingly enough, Diemaco/Colt Canada won't sell its weapons to film armorers in Canada! He also told me more about those mystery grenade launchers we were discussing earlier, plus he updated the page with more guns that I had missed. I really hope he comes back; he said he might be able to get some pictures of the launchers for us.

No worries on the Heat stuff, although I think you actually mean Gunmaster45, not me. As far as buying handguns go, I have yet to even try it in my home state (NC) because I live in Orange County and you have to get three "references" (people who are county residents) to apply for a purchase permit at the sheriff's dept. Sadly, Chapel Hill is full of overly-liberal people whom I wouldn't be comfortable asking to sign my permit application, so I've never bought a pistol here even though I'm of age - I've just inherited pistols from my grandfather. Ah, well, maybe if I wind up re-locating to Texas for this new job, I can finally buy that SIG P226 I've always wanted... -MT2008

Re:Re:Sahara

Thanks for going so far out of your way to get the photo of the Type 84 with the AKM-style sight...I realize it must have been a hassle! However, I wasn't saying they put an AKM sight on a Type 84; I simply thought the front sight itself indicated the gun was a Type 84 because my eyes suck and it looked hooded to me from that perspective.

As far as the source goes, I believe Crowntower Limited supplied the weapons that were used in Sahara. I say that based on a couple of deductions: Sascha Robey was one of the armorers who worked on Casino Royale as well as Sahara, Crowntower is listed in the credits of Casino Royale (but not Sahara) as the weapons supplier, and finally, if you look at our Casino Royale page, the AKs in that film top look identical to the one in Sahara that we were talking about. Perhaps this Sascha Robey rented the same guns for two films.

Re:Sahara

A lot of what you've said makes sense...BUT, there's still something bugging me about the third screenshot. Either my eyes really suck, or that is still a Norinco-style sight in that shot. HOWEVER, the first screenshot does, admittedly, show what appears to be a standard AKM-style front sight. Compare:

File:ComparisonSaharaAK.JPG

I'm also confused because I have seen Type 84s fitted with mags that LOOK like the Romak mags, even if they aren't, like the one in the picture I posted. Anyway, is it possible that they used two different weapons for this "hero" gun use, and one was a Romak (or whatever) and the other was a Type 84 re-styled to look more like the Romak?

BTW, I didn't correct that typo; Gunmaster45 did. -MT2008

Oh, yeah, and the screens are really cool. As far as people's sudden interest in ignored pages, I guess it has to do with the fact that once they see somebody's worked on it in the "Recent Changes" section, they glance at it, and then they're more likely to spot mistakes they didn't see before.

OK, you know what? My eyes do suck! I just stood way, way back from my monitor and squinted, and now I see that it's not a hooded Norinco sight; it's just the angle makes it appear circular. You are right; it can't be a Type 84, or anything that uses Type 84 parts. And I'm guessing that also means I could be wrong about the Casino Royale AKs, too.

It's kinda strange, though...I wouldn't have figured British armorers would use civilian AK variants that were essentially geared towards the U.S. firearms market.

I, Robot SMG

Excellent, I'm glad to see you found the scene in I, Robot where it shows a close-up of the SMG's receiver and the Spectre's safety is visible. I was beginning to think my memory had failed me and that I was wrong...but I remember seeing this movie in the theater, on the big screen, and seeing that exact same image in your screenshot. Immediately, I thought to myself, "Spectre M4!" Actually, only a few months before the movie came out, I was at a gun show where one of the dealers had the semi-auto carbine version on his table...probably how I recognized it so quickly!

BTW, I believe the trigger and pistol grip are one unit on the Spectre. It looks to me like the armorers who worked on I, Robot just removed it and added that PSG1-style grip, but never bothered to put on a replacement trigger guard. - MT2008

M70

Hi,

Do you think we should really have a separate page for the Zastava M70, instead of just putting it under the AK-47 page, as we did for the Type 56? - MT2008

I see your point. However, my personal criteria is that we should keep all conventional 7.62x39mm AK-type assault rifles on one page. Although the M70 series are by no means straightforward AK-47/AKM copies (due to the ladder sight and the mix of stamped receiver with traditional AK layout, like on the Type 56), they are still basically pretty conventional rifles, as opposed to say, the Norinco Type 86 or the Saiga and Vepr series. I feel it'd probably be better to keep the M70 on the AK-47 page, especially since I haven't seen any movies yet that feature weapons like the M76 or M77. This is, of course, sort of a gray area and one of the biggest problems with this site, IMO.

Also, I feel compelled to point out...there's an episode in Ultimate Force where "Russian" soldiers are actually seen using M70Bs and Type 56s, which is of course ridiculously inaccurate (the episode takes place in the present-day Chechen conflict).

RE: RE: Studio Weapons

You more than answered the question, thank you. I have seen some pictures of places that do the rentals and, frankly, privately list them as places I would most want to work. "No we don't have a .50 cal minigun on the shelves but I can check in the back." Once again thanks for the info and for the earlier compliments. Incidentally, I am working on a new one..."Farewell to the King" (1989)..should have it ready in a few days.

Do studios still keep their own "arsenals"? I was given the impression that most, if not all, firearms for movies were in the private sector.

RE: Images

No skin off of my nose what images you use mate. Fact of the matter is, when you boil it down, pretty much all the images we are using on here are not "legal". So which ones you use, from whatever site are ok with me. Frankly, as far as I go, I try to only use images which do not have another web site's watermark on them.

RE:

First of all, cheers for the update on the Type 84 picture. There's no hurry; I understand if it takes a while to get the appropriate mags (since obviously, a Type 84 doesn't look very different from a Type 56 without them).

Second, while I don't speak for everyone on here, I can say that I personally do not have any problem with you replacing pictures of guns on this site (even those that I uploaded) with any that you took. Nor do I see why anyone else would. The only reason I can imagine anyone getting offended would be if they went to the same effort you do to get the guns and photograph them on their own. But pretty much everyone else on here just uploads pictures they copied from other gun sites, in some cases airsoft web sites (like that picture we used to have of the SP89, which was just an airsoft MP5K fitted with an SP89 handguard from DenTrinity; terrible!). And it doesn't take much time or effort to copy and upload someone else's work.

Additionally, your gun photos are obviously of superior quality to anything else on here, and they're of guns that have actually appeared in movies (possibly the same movies as the pages they're on), so as far as I am concerned, there really isn't any reason why we can't replace any existing photos of guns with the ones you've taken. In fact, I would encourage you to not be so timid in the future when it comes to replacing photos. If you want an example of what I mean by this, take a look at the Armalite AR-18 page. Your AR-18 picture is way better than any of those on the page, so I don't see any reason why you can't just remove some of the others (maybe keep ONE of the other photos of the gun with the scope, and even that could be replaced if you took an equivalent picture).

One thing I will point out, though: I have sometimes used pictures on my pages that are from the web site of Rick Washburn's company Weapons Specialists, Inc. (http://www.weaponspecialists.com/index.php). They provided the guns for I Am Legend, so the page for that movie now features pictures of the guns used in the film that I copied and uploaded from them (including the tan-framed Mark 23). In cases like that, I'd prefer those particular photos stay up (you'll know them because I always provide links and info mentioning where they're from) because they feature the actual movie guns, and they're decent quality. Besides that, I don't have any problem with you replacing any and all photos of guns on this site with yours.

Chinese Type 56

First of all, I GREATLY appreciate the photo you took of one of the Goldeneye AKs for me. I didn't know you had access to any British armories?

However, I have one question: Do you think it's really appropriate to classify the Chinese Type 56 rifles with stamped receivers as "AK-47" and "AKS-47" clones, as opposed to AKM/AKMS derivatives? I realize that the Type 56s with stamped receivers lack just about all of the other features of the AKMs (including the muzzle break, ribbed receiver cover, rate reducer, grip rails, narrower front sight, etc.), but I've usually heard them described as AKM copies simply to distinguish them from the earlier milled-receiver versions. I know this is an over-simplification of sorts because the Type 56s aren't really orthodox AK-47s or AKMs (they're more like a weird hybrid version), but I figured it would be more appropriate.

Well, I would say I know the differences between the two. I must point out that I own a Chinese AK (mine was imported by Golden State Arms and simply has 'AK47S 7.62x39mm - Made in China' stamped on the receiver). I was simply curious whether the presence of a stamped receiver on the Type 56 made it worthy of being designated an AKM variant or not.

Personally, I think the best bet might be to literally just create a new sub-entry for the Type 56 under the AK-47 page and then we can focus on finding any and all movies that feature the Type 56 and putting them under there. This would reflect best the fact that the Type 56 is sort of a weird hybrid AK-47/AKM with distinctly Chinese characteristics (such as the hooded front sight), which most other AK derivatives (like the Maadis) don't have.

Haha, no offense taken, just wanted you to know I'm not a complete newbie when it comes to AKs, though obviously you completely blow me out of the water. Anyway, I would definitely appreciate the Type 84 pic whenever you get a chance. Not sure if there's anything else I need at the moment...but I would strongly encourage you to just take pictures of whatever you can get your hands on. As I've said, it's really great that we have you because this site is full of pictures that are copied from sites like world.guns.ru or (in some cases) AIRSOFT websites (i.e. the SP89 picture that we used to have before I replaced it).

BTW, these are some incredible pics you've gotten us lately, moreso than usual. How on earth did you get that Romanian AIMS from "44 Minutes"? Do you know Thell Reed, too? Also, I'm going to do a LITTLE bit of additional work on the Type 56 entry, and I think I'm also gonna ditch the AKS-47 one for now (simply because there don't seem to be any movies I'm aware of that have actual milled-receiver Russian AKS-47s or close copies) and move all the Type 56-1 entires down. If you disagree, you can revert (or partially modify) the edits and I won't mind. Also, good work on the RPG-7 article getting the Type 69 mentioned (it's something I wanted to do myself - mostly because "Kingdom of the Crystal Skull" also has a Type 69).

Re: Editing Dogs of War

Thanks for the info. I've seen those guns in a whole bunch of movies and I always wondered what they were, who made them, and why. I think they've also appeared in a couple episodes of The A-Team and a Chuck Norris movie or two.

I have some great screenshots of the fake Uzis which I took for my Raw Deal page (I've been meaning to work on it for ages, but so far, I just never have managed to get around to it). Here they are:

Error creating thumbnail: File missing

Re: image

Sorry for the mixup. Feel free to replace the image with a better one if you have one handy. It's good to have a professional armourer on the site to help out, you've been doing some good work so far. Orca1 9904 10:58, 8 June 2008 (UTC) Orca1_9904

Contact?

I was wondering, is there any way we could chat off-site? I'd enjoy the opportunity to talk with you about your work as an armourer and about some various weapons and films. My contact info can be found on my user page. I hope to hear from you soon, and wish you well. Orca1 9904 22:43, 9 June 2008 (UTC) Orca1_9904

Red Dawn

OK, I was simply confused because I thought you were saying that the Egyptians didn't call the full-auto version they made for their armed forces the Misr, which would contradict almost every book and web site on AKs I've read. You obviously know far, FAR more than I do, so I think it's perfectly fine if you want to edit the page to refer to the guns as Maadi ARMs. Perhaps it might also be reasonable to put in a note that the ARM is the semi-automatic version of the Misr or something? Also, please post the picture of the "Red Dawn" AKM you took.

Appreciate your contributions, and (especially) your photographs. It's really cool that we have somebody like you on here. Do you by chance have any pictures of the Norinco/Poly Tech AKs that the rental armories purchased in the 80s? A long, LONG time ago, somebody put one of them up for sale on GunBroker; I wish I had saved the picture. I'm also curious to know if you have pics of the Norinco Type 84...I've been trying to get a good one to add to the Casino Royale page and my Harsh Realm page for a while now.

Wow, thanks! Yeah, I'd prefer the basic fixed-stock configuration since the ones in Casino Royale and Harsh Realm seem to have that (except the wood on the CR guns looks like it can't be factory), but I wouldn't encourage you to go TOO far out of your way, as I recognize you must be really busy.

Which armory is it that you have access to?

Re: My two cents on the Hulk Launchers

Yeah, I think you're probably right...it looks to me that the armorers were shooting for an M32 look but couldn't get the real deal, so they took civilian launchers (most likely DefTech) and modified them heavily. I notice that there seem to be a lot of 37mm launchers which are depicted as HE grenade launchers in movies (i.e. Colt 37mm Flare Launchers substituting for M203s). I guess this is another case of the same deal.

Sure, you can re-post the CZ99 pic. It isn't "mine"; I took it from world.guns.ru, which is where many of the photographs of guns on this site come from (as you can imagine, that's why I'm happy to have someone like you who is willing to give us original photos, especially when they're of actual movie guns).

Thanks

The Dogs of War was one of my first "efforts" here. I knew, already, that you saw a guy running around with a MAC-10 during the weapons training phase but did not know there was one of those cheesy ass "fake" Uzis. Oh, the same goes for the Car-15s.

Incidentally, I forget what movie I saw it in but there was a fake Uzi in it and the foregrip on it was rotated so that the front sight was actually pointed downward!!!

Hey

Hey MoviePropMaster, I'm Alienqueen11, and I seen the images you have uploaded, and they're great. I also want to know if you can do me a favor, if you can upload a picture of a Remington 870 with Ghost Ring Sights and a High Capacity Tube like the one in the screenshot below for the Dawn of the Dead (2004) page, I would greatly appreciate it, and great work so far.

Error creating thumbnail: File missing

Thanks

Thanks for complitementing my knowledge on guns, I also reverted a version of one of your MP5 pictures because someone copied over it with an airsoft image, I really wish some people would checked the thing while they're uploading an image to make sure the name isn't already used to avoid mistakes like this. And once again, thanks for your contributions and keep up the good work. Alienqueen11.

Heartbreak Ridge M16's

I just saw Heartbreak Ridge on TV this afternoon, and all the M16's I saw on-screen were the A1 variant, complete with bolt-forward assist buttons at the rear of the upper recievers. Even saw one fitted with an M203 grenade launcher used by one of the Recon Marines under Gunnery Sergeant Highway's command.

Orca1 9904 08:01, 22 July 2008 (UTC) Orca1_9904 - He might want to look at my page and see they weren't all M16A1s.

Question

Gunmaster45: Hi, I was just wondering how is it you take a picture of a gun and get a perfectly white clear background? What method is used to get that effect? My other question is that on the Hollow Point page I made recently, did I get the AK varient right? I figured I'd ask you as you seem to be the AK pro on the site. Thanks. (My list of pages is on my profile if you feel like checking any of my other work as well.)

M14 rifle

I've noticed that the M14 and M21 rifle pictures on this site aren't really that great, is there any chance you could take some good shots? The pictures now are blurry, or black and white.

37mm Launcher

Thanks for fixing up that page, I was told by MT2008 it was a Colt Launcher, I guess it was a Cobray. Finding the pictures of them was probably the hardest thing on the page. Do you think we should keep the M203 to launcher comparison picture or is it irrelevant? -GM

I built the colt launcher page based on what MT said, but your input greatly helped it. It's a shame taking professional pictures is so complex. The best I have is photoshop and an erase brush. I have a Norinco Type 54 pistol and I wanted to put pictures of it on the site soon. I'm not bad with editing, it should come out okay. I just need to find the time to do it. The M14 rifle pics came out great, let me know if you get your hands on an M21. I'll have plenty of films to be corrected in the future, my to do list touches the sky. One or two every friday or saturday. Stay cool. -GM

Bren 10 "Peregrine Falcon"

Here's a tricky task, do you think you could find a Bren 10 "Peregrine Falcon"? Aparently it is what John Practice uses in Last Action Hero according to user input, and I can't find a good picture of it. Until I do find a good picture, I'll have to keep my horrible AR-24 picture I had on their before. If it isn't a Bren 10 PF, I'd assume you of all people would shoot me straight.

Error creating thumbnail: File missing

This is the picture of him with the Bren 10 "Peregrine Falcon". His is a tutone model, but I'm not that picky. If both can be had, it would make a nice page in the Bren 10 gun section.

M1911/M1911A1

I apoligize for asking one more thing of you, but the M1911 and M1911A1 pistols are infamous works of art in the firearms world, commonly used in films. We got a repro M1911 picture (modernized), a Springfield M1911A1 (when Colt M1911A1 is the genuine picture desired), another M1911A1 with pachmyr grips (better than springfield, but see how it sticks out on Platoon? It's too modern) So is their any chance you could find a genuine (or prefered, an authentic reproduction) of a Colt M1911 and Colt M1911A1 to snap some shots of, that would be awesome. I trust you know them apart, your a pro. Thanks. Good luck. -GM

Re:Last Action Hero

I saw Last Action Hero when I was young and loved it. Now, it is still one of my favorites. I like how it makes fun of action movies, by showing how Arnold can fire a billion rounds from a Desert Eagle and cars just explode for no reason. I'll fix those problems you mentioned. Your saying they are more likely civilian TEC-9s instead of TEC-DC9's? What physical traits help determine this, just the sling? And they were firing full-auto so they were probably converted.

Hi!

Still no replacement grip for the M70?

Shame, it looks strange with that grip - I'm used to seeing them on M76s and M72s... which reminds me: about that mystery long barreled AK - I know that Crvena Zastava makes under-folder RPKs, namely the M72A (7.62 - based on M70), and the M90A (5.56 - based on an assault rifle of the same designation). The under-folder RPKs (those with an "A") have removable bipods (the standard, solid-stock ones have fixed), so w/ the folding stocks and w/o bipods they would look like those mystery AKs, no? Also, one more improtant fact: unlike the Yugo AKs (which have 3 holes), the Yugo RPKs have TWO holes in the forward grip (like the original AKs). http://pookieweb.dyndns.org:61129/Yugo/pics/m72a.jpg

I hope this was hepful, keep up the good work!

Request

I'm sorry to ask, but if you get the chance, can you upload a Beretta M92FS? I know the ones on the site are already good enough, but I want to see how great one by you would be. I know you're already busy, so don't do it if you're too busy, and if you can't upload it, it's okay. Anyway, welcome back, the new pictures for the M16 and M14 are great. Alienqueen11

RE:870

I think you're right about the Mossberg sights on the 870, they seem to match those on the Mossberg more then anything.

Here the picture I had on the page when I thought his shotgun was a Mossberg 500:

File:Mossberg500.gif

Mossberg 500 12 ga. with optional ghost ring sights.

And this is the image I have on the page now, seeing it now, they look nothing like the sights in the screencap:

File:870p.jpg

Remington 870 Police Magnum with magazine extention tube and ghost ring sights.

And it looks like the armorer must have put the Mossberg sights on the Remington:

Error creating thumbnail: File missing

Hope this helps, and thanks for the favor, I appreciate it. Alienqueen11

Done

Don't worry, he won't be able to edit again, if it happens again, I'll be sure to make so only registered users can edit the Commando page. Alienqueen11

Karabiner 98k sniper rifle

I recently noticed while working on the Saving Private Ryan page that we have no sniper rifle varient Kar98k rifle pic. I've noticed you Enemy at the Gates page is in need of this picture as well too. I apoligize for adding yet another gun to your to-do list but just let me know if you find one. -GM45

Re: FINALLY

Excellent! I already have a use for the 870 folder, too - just put it on the RoboCop page (which features an identical weapon). And thanks for the UMP-45 and the Gen 2 Glock-17 as well! There are so many movies that feature Gen 2 Glocks, yet all we have is that stock picture of a Gen 3. When I get back to my place later today, I'm going to start using your Glock in every movie page that features such a gun.

Also...that AR15A2 you photographed; can we consider it an M16A2? Is it converted to auto or burst? We really need a good M16A2 picture, because the one that appears throughout the site is yet another crappy airsoft picture.

RE:

Hmmm, I'll have to see. There's lots of loose women and great beer over here in Texas that I might be able to offer you, but the gold's gonna be hard to come by! Haha.

Thanks yet AGAIN for the improved two-tone P226 picture. Weirdly enough, I completely failed to notice that the one in Face/Off had a silver hammer until you pointed it out. But it's great that you have a better eye for detail than I do, and moreso that you corrected it. And, of course, thank you for answering my questions about movie guns to the best of your ability. I think your idea for a 12-gauge pump page is perfectly useful, though I must point out that if it can't be categorized, it's gonna be hard for other users to find it. In order to make sure people see it, please add links to it on pages for the shotguns it distinguishes from each other. That would be the best way to make sure your word gets out.

Hope you don't mind, but I've already shown your SIG pics on SIGforum.com to draw attention to our site. I'd show your H&K pictures on HKPRO forum (where I also post), too, if their forum wasn't down every other minute. I dunno if you post on any other gun-related boards, but if you do, show off your pics and point folks to IMFDB. The more attention, the better. We've already got 55,000 views from the Heat page (which features your P220 and M16A1 pictures, among others), so spread the word and more people will discover the beauty of IMFDB with its original movie gun pictures, taken by an actual movie armorer!

Oh, yeah, and I will respond to the topic of vandals on Bunni's talk page shortly. -MT2008

Re:Dibbs

Feel free, one less thing for me to do. I only ask that you keep the bow and knife on the page so it fits the other two. I'll eventually add them to Rambo (2008) so that one fits as well. If anything I'll likely just add some shots like I tend to do. Thanks for asking me and not just doing it. Can't wait to see it. -GM45

Almost forgot, MT2008 may have asked already but we really need a Poly Tech Legend AK pic.

Nope, I forgot, too! Yeah, it wouldn't be a bad idea. I've been looking for one on Google image search, but no go on any good ones. Also, speaking of AKs (and here I go again making your request list longer), a new AKM pic would be nice. Not to sound unappreciative, but I tend to shy away from the one you took just because the red stock looks out-of-place and ugly, plus the magazine is the plastic type rather than the ribbed type. If you can get a picture of one of the Maadi AKMs with the right stock, plus a metal ribbed-style mag (which is more the "classic" style, if you will)...great. If not, no worries. -MT2008

Re:Casino Royale

Yep, that's the exact same picture I looked up to remind myself what an M76 was. Actually, I think I always thought that the M76 just referred to their long-range rifle, and I didn't remember that their smaller-caliber AKs were called M76. But I did know off the top of my head that it couldn't be Zastava because their full-sized AKs always have the folding GL sight, and the Casino Royale AKs don't.

BTW, any idea what's wrong with the Taurus PT92 picture you gave us? I just put it on the page for The X-Files, and now it's disappeared. A search of the page history indicates no act of vandalism.

Oh, yeah, and one other thing: I never thanked you for getting that Australian Automatic Arms carbine picture for The Matrix page. So...thanks! -MT2008

DotD 870

I don't mean to bug you, but did you have any luck with the Dawn of the Dead Remington 870, and did the message I sent you about about the sights help at all, please let me know. Also excellent work lately, The new Mossberg 500 and Remington 870 pictures are great, and so are the many other pictures you uploaded lately, I really like the two tone Sig P226s you got for MT2008, those are one of kind. Good luck, and keep up the good work.--Alienqueen11 03:10, 10 October 2008 (UTC)

Kelly's Heroes

I was aware they were using FN BAR type D 8mm guns instead of american .30-06 BARs but I didn't know they were using the wrong mag pouches. Thanks for the info. -GM45

Re:M1911 pistols

The 1911 pictures are absolute perfection. The M1911 from 1913 looks great. I have one from 1913 too and yours puts mine to shame. Thanks very much. -GM45

And thanks for the P38, too! Feel free to just delete the one that's been on the P38 already, and insert your image into any and all movie pages featuring P38s. I've been replacing old gun images on many pages with your new gun images (i.e. the Glock you uploaded earlier in the week). -MT2008

Need some help

Hello, I just added a few more guns in The Unit page and I need some help IDing some of them that I can't seem to put my finger on. Care to give me a hand if you can?

-Excaliber

Re: Beretta M92FS

It looks excellent, I don't mind an American made Beretta, an Italian made one isn't too different, is it? If you come across an Italian one in the future, you can upload that, but you don't have to, like I said, I like the new one as it is. Thank you soo much for the favor, you never disappoint.--Alienqueen11 23:28, 13 October 2008 (UTC)

Thanks for the USP!

I was thinking of asking you for a USP pic, but figured I should hold off on it, just to prevent you from getting bogged down.

As you can tell, we're embarking on a campaign to replace any and all older images of guns taken from other sites, with the pictures you've uploaded. I'm also curious...what would you think of a page dedicated to explaining the importance of your gun images to new users of the site, and featuring examples of your work? It would be linked from the main page. -MT2008

Should cartoons be allowed?

I want to know if it is either no one cares about the fact that cartoons like Family Guy, The Simpsons, American Dad, and recently South Park had been allowed to this site. I have don't think these pages should exist because do you think about the rare guns that appears on those shows and wonder what they are? Cause I sure don't. I'm too busy laughing my ass off to how funny these series are, not wondering if the shotgun Homer used in the Zombie episode was a Winchester Model 1887 or that it never appeared in any other episode following. I don't care and I dont think anyone else should care. We're getting cartoon fanboys that thinks just because Family Guy has an episode where Stewie has a closet full of look alike guns, means we should write a page about them. Those guns are not the point of the show and the artist that drew them obviously didn't take much consideration for them or mention. I think Family Guy, The Simpsons, American Dad, and South Park be removed at once. None of them deserve to be on this site. And whoever puts them here doesn't respect this site enough.

That's a little harsh. I added some of the info on those pages, thank you. I was eventually going to do the South Park movie, because it does in fact have some pretty obvious guns in it. Personally I think they shouldn't be removed but if they are to stay, someone should take the time to screencap them and show us what they are talking about. -GM45

Reign of Fire

I just finished screencapping Reign of Fire and before I upload them on the page, I wanted to see if you knew what this gun is. Based on what I see I'm assuming it is a .577 Nitro Tyrannosaurus Rex rifle built personally by the Mauser company's greatest gunsmiths based on the Mauser rifle type extractor/bolt release and the Mauser style firing pin striker seen on the gun. At first I thought it was a Model 70 or a Mauser sporterized and then they show what big ass rounds he loads in it so now I just don't know. I figured of all, you'd likely know best. Also, if it is a T-rex rifle, I'd likely need a picture of it because as usual, the internet sucks for finding gun pics. I know this gun is rare but so is the .600 Nitro double barreled rifle, but that is seen in The Lost World: Jurassic Park despite that. I'm not expecting a picture from you because I know how rare and expensive it is but I figured if it ever came up I could count on you.

Here's the pics:

Error creating thumbnail: File missing

His rifle resting up against the table.

Error creating thumbnail: File missing

Note the extractor/bolt release and Mauser style striker.

Error creating thumbnail: File missing

This scope symbol looks familiar, what brand is this?

Error creating thumbnail: File missing

Look at the monstrous rounds he loads it with. Only two fit in the gun! They look like either .577 or .600 Nitro rounds.

Error creating thumbnail: File missing

He fires the rifle at the big bull dragon, which does nothing and tosses it away after two shots.

Hope you respond soon. -GM45

I've decided to upload the movie tommorow to give you more time to respond. -GM

I didn't expect you'd have one, after all it isn't a mass produced company gun. Major members of the Mauser company make it customly crafted. You'll see it all on the page in a sec. Also, the pic I uploaded I had to edit so it was horizontal and since it had 4 whited corners after turning it, I had to clone the corners in. Once you know, it is far more obvious to tell where I edited.

Re: New Pics

What I meant is that I want to make sure people on this site see how thorough you are, and how accurately you match guns to requests. Remember that AR15 Sporter that you visually modified to look like an XM177 from The Dogs of War? Or the two SIG P226s you made to look the ones in Face/Off and Bad Boys II? Those are the kinds of gun pics that I want to show off to new folks. What I would do is just make a page that briefly explains your contributions, and then shows guns you've photographed and how close they are to those in the movies. This is an unformed idea, I admit, but basically, I want people browsing this sight to understand (1.) That your images are exclusive to IMFDB, and (2.) That they're basically close representations of what those users have seen in movies. I know I'm not being terribly articulate, but do you understand what I mean?

And don't worry about replacing previous pics with your pics. The rest of us will continue to do that for you, as we've been doing. So far, we've pretty much replaced all of the old M16s, M4s, Berettas, Glocks, Kar98s, MP40s, etc. with your guns. I think I'm gonna start putting your USP pic on our pages, too (except those that feature the larger .45 variant of the USP, like Collateral).-MT2008

AK-47 recognition page

Now that you've made a Shotgun page, why not make an AK page to tell a Norinco from a Maadi from a genuine, from a poly tech, etc. Also, maybe an M16 page for slab sides, A1s, A2s, etc. It would probably help the users out a lot. I'm sure the shotgun page did. Personally, I have trouble telling a Norinco Type 56 aside from its hooded sight. Perhaps a couple of close ups of sight placement, recievers and all that will make me a more efficient I.Der. -GM45

Dawn of the Dead

Hey, MPM2008, I uploaded some more shots of Ving Rhames' shotgun in Dawn of the Dead (2004) if you want to take a look, it's in the Custom Remington 870 section of the page. Thanks in advance.--Alienqueen11 03:48, 19 October 2008 (UTC)

Hey

Hey, MPM2008, do you want me to put protections on your images so no one can revert them if they've been upload over with images from the internet in the past, or upload over them? I'm asking this because some user keeps uploading a crappy picture from the internet over your H&K USP40 image. And if you want, I could ask Bunni to make you a mod or I can take the protections off them whenever you want to edit them or upload a new version of them. Let me know what you want to do.--Alienqueen11 20:24, 22 October 2008 (UTC)

Update: I protected all your images, and I also asked Bunni to make you an adminstrator so you can upload new versions of or revert them if want. If you not made an admin right away, just tell me what image you want to access, and I'll unlock it for you. I'm sorry I had to do this, but I wanted to prevent idiots like the guy who kept uploading over your H&K USP40 from changing your pictures, and I promise, if I ever get the ability to block users back, I will undo the protections. See you soon and good luck.--Alienqueen11 03:07, 23 October 2008 (UTC)

Made you a mod, enjoy. WikiSysop 22:42, 23 October 2008 (UTC)

Response

Thanks, I will always make sure your images stay the way they are. And I didn't understand that user either, I told him politely a bunch of times to stop, but he wouldn't listen. What really intrigues me most is how somebody could prefer a crappy image they probably found on Google Images over an excellent well photographed image such as yours. As for being a mod, congratulations, but I most warn you that the block function is not working at this time, but Bunni is trying his best to fix it, but you will be able to delete any pages or images you don't want, and you will also be able to protect pages. And if we ever get the ability to block back, that one user is going to be the first on my list.--Alienqueen11 02:20, 24 October 2008 (UTC)

As for the 870, take as much time as you need to, I'm sure it'll be worth the wait when it's uploaded. I will also have more requests in the future, but I won't bother you with them right now. And I also I have a question, I read your new project pictures thing on your user page, and when you say 870 riot configurations, do mean Remington 870s similar in appearence to the one seen in Walking Tall? Thanks, and good luck, I can't wait to see any future images you upload.--Alienqueen11 02:20, 24 October 2008 (UTC)

Update- MPM2008, you are now able to block vandals.

Re:Special page

Well, that's fine. But now that you're a mod and your images can be protected, I don't think there's much to worry about. I also think it would just be cool if new users understood right off the bat that IMFDB has essentially its own movie armorer. -MT2008

Other Request

Hey, MPM2008, whenever you get the chance, is there a possiblity you can get me a Beretta 92FS Inox or Stainless model of the Beretta 92FS? Thanks in advance. Also, good work with your recent images, I really like the new Walther P99, I was going to ask for one, but you thought about it before I did. Keep up the great work.--Alienqueen11 21:51, 25 October 2008 (UTC)

Sin City Yellow Bastard's custom 92FS

YB's Beretta 92FS in Sin City is a unique blend of a factory black and an Inox model, similair to SIG-Sauer used in 2 fast 2 furious. Since AQ11 just asked for an Inox, if you get your hands on one, do yuo think you could mix the two together. This is the gun in the movie.

Error creating thumbnail: File missing

Note how it has reverse tutone rather than the typical factory style.

Thanks -GM45

Re: Pop Quiz

I think that may be a Smith & Wesson Model 27, as it comes in both .357 Magnum and .38 Special and looks similar to the one used in Bad Boys by the main villian. Orca1 9904 06:55, 27 October 2008 (UTC)Orca1_9904

Isn't the Mod 27 a larger frame? That's what's stumping me. It looks like the frame of a model 10. MPM2008.

That one in the Bad Boys screenshot looks pretty huge, unless the actor has small hands. Orca1 9904 07:38, 27 October 2008 (UTC)Orca1_9904

Arghhh. I had better go back to the vault and check. I keep on thinking it's a Model 19-2, primarily because the Mod 27-2 barrel looks different than this one. Thanks so much for the effort. MPM2008

BTW, I'll let you know what I find out. :)

Error creating thumbnail: File missing

Smith & Wesson Model 27 .357 Magnum?

Error creating thumbnail: File missing

Fouchet dual wields with both his Beretta Cheetah and a Smith & Wesson Model 27.

RE:animated gifs

I have a lot of high-tec computer editing crap, I likely could do it. I just don't know how. My sister is computer wiz, I see if she can figure it out. I had all three of those Heat GIFs saved on my Myspace. Just a heads up, I'm gonna be doing The Punisher (2004) soon, so you can check that out. I can't make you any promises on the animated GIFs tho. -GM

Re: Reign of Fire

Thanks. Take your time on the Ultimax, it isn't a big deal right now. Wiki just made me an Admin. so I'm feeling pretty damn special right now. I'm going to get the Punisher (2004) on today, than I'm finally back on track with my original list. -GM45

"Non Guns"

I just made a page for the "Non Guns", and I'm curious to know what you think of it. I don't know a whole lot about them besides what I've read online, whereas I imagine you've probably got some experience with them, since I've heard many armorers rent them for scenes where blanks are unsafe. Any thoughts? Would say the summary I've done at the top of the page is a pretty good description of what they do?

Cheers.-MT2008

Haha, trust me, I hear you on the "fugly" part. I cringe every time I spot a Non Gun in a movie or TV show, because they're soooooo fake-looking and too many idiot directors don't even think to film them at angles/lighting conditions where it won't be so obvious what they are. But, like you've said, our goal here is to be educational and informative, and no matter how crappy Non Guns might look, they are still important to the topic of guns in cinema, and that's what we're here for. :) The images are from Weapons Specialists' web site, which apparently subrents them; ISS has their own pictures, but I prefer Weapons Specialists' because theirs don't have the measuring tape above the gun.

Sorry to hear you've been sick, but don't worry...you never have to apologize for anything. I really like the idea of your "Hello IMFDB!" card and think it would be great for our site. I will, of course, not demand it or anything, but it would be awesome if we had something like that. I agree with the idea of using the IMFDB logo, though if I can think of anything else, I'll tell you. As usual, thanks for all the work you've been doing (for us AND Hollywood), and thanks for the kind words on my Non Guns page. -MT2008

2nd-Gen Glock 23

Hey, I was wondering if you could possibly provide an image of a 2nd-Generation Glock 23 for the article on The Fugitive, since the image for that weapon on the page is of a 3rd-Generation model with accessory rails on the frame as opposed to the smooth-framed 2nd-Generation model seen in the screenshots? I already edited the Glock 22 section similarly for that article and the sequel U.S. Marshals, and was wondering if you could help me out with that one image so I don't have to chase down an image on Google. Thanks in advance. Orca1 9904 08:11, 1 November 2008 (UTC)Orca1_9904

I asked for Second-Generation Glocks, those are 3rd generation (note the accessory rails at the front of the frame). Seeing as someone identified the compact Glock model in the film in question as a Glock 19 it's something of a moot point now. However, a 2nd-Generation Glock 19 image would be appreciated as there's none available here yet and there's several pages here that could benefit from an image of that weapon. Orca1 9904 07:50, 12 November 2008 (UTC)Orca1_9904

Get Well Soon

Hey MPM2008, I heard you were sick so I wanted to stop by and say get well soon.--Alienqueen11 20:45, 1 November 2008 (UTC)

My man!

Awesome! The AKM and Type 84 look great; they're just what we needed. It's weird that I haven't been able to find a good picture of a standard fixed-stock Type 84 anywhere; yours might just be one of the best pics of this gun on the entire 'net right now. Question...is the AKM a Maadi, or is some other make? I would like to edit the entry on the AK-47 page to say if it is or not.

I will start phasing out the old pictures and replacing them, although it seems you guys have a head start on me. And thanks for the other new pictures as well - love that new PSG-1, the Uzi Carbine, and of course the "plain" 870 police (which, like you said, was something we REALLY needed). I'm also glad to see you're better, too. Take care. -MT2008 15:19, 2 November 2008 (UTC)

(BTW...dunno if you've noticed, but I only discovered this recently; if you hit the " ~ " key four times, it signs your posts automatically so that you don't have to type out your username. I've been using Wikis for several years now and I only just figured that out. Alienqueen discovered this long before I did, but just a heads-up.)

Great work

Thanks for the police 870, it looks excellent. we really needed a standard since so many of the 870s on the site look like that. I'll be sure to replace all the 870s that need to be replaced with that. And also, I'm glad to hear you got better.--Alienqueen11 18:27, 2 November 2008 (UTC)

Oops

I didn't read correctly who gave me the PSG1 pic

Pics

Hi,

First of all, thanks yet again for the new pics! The SR9s are nice, but...I had no idea that some SR9s in movies are actually converted from HK91s? If that's the case, then by all means, you should still go ahead and put down those pics under the SR9 section of the G3 page. But does this also mean that the SR9(T) from The Replacement Killers is one of these guns? Again, this is just a huge revelation for me. I still see no reason to put them under the HK91 entry, simply because if they're meant to be SR9s, just as the converted HK94s are meant to be MP5s, then I think it's appropriate to label them as such.

And, thanks for the Type 56 that looks like the Goldeneye ones. If you want to shoot it again with the regular non-blued bolt carrier, that's fine by me. However, I should also point out that the ones in Goldeneye also have red bakelite magazines, so you might wanna give it one of those, too. Then, you'll have something identical to the Goldeneye "AKS-74s". But I will still use the picture you have in the meantime. -MT2008 00:15, 3 November 2008 (UTC)

Hmmm. Yeah, I guess I figured when I noticed the trigger, but I wasn't sure if the gun from The Replacement Killers was genuine or not. Was this sort of thing done because real SR9s were too expensive? I figured since the SR9 used to be a readily available civilian "assault rifle", armorers would use it.

However, if your guns are a fairly accurate representation of the SR9s that have appeared in movies, then it's better that you've given us images of these particular guns. I agree with you that our goal should be to have the most accurate representations of movie guns possible, and since you're an armorer, we can anticipate that yours represent what movies use.-MT2008 04:15, 3 November 2008 (UTC)

only 125 TCs were imported into the entire USA and only 100 T models

Wow, it was really that few? OK, that explains everything. I had no idea they were so rare to begin with. Even HKPRO, which has import data for most of the -90 series guns, didn't have that info. Thanks for those numbers.

Like I've said, I think this means it's good that we have the pics you've taken because they are a very accurate representation of the SR9s actually used in movies. I would recommend you do one of those "Movie Armorer's Notes" in the SR9 section of the G3 page, just like you did for the Colt Commando section on the M16 page, explaining what you've told me. Hope it doesn't bother you that we're unmasking all of the various tricks that you armorers have been using over the years to convince moviegoers they're seeing one gun when it's actually another! -MT2008 02:59, 4 November 2008 (UTC)

Re: SR9

I think part of the problem is that there just aren't enough people who take Wikis in general seriously. As far as HK aficionados go, one of my pet peeves is that way too many of them I meet are way too arrogant towards non-HK owners for not being able to appreciate the "Teutonic superiority" (as Larry Correia put it) of HK weapons. Sorry to say that I dunno if you can please some of them no matter what you do. :)

Personally, I accept that there's some stuff that even Hollywood's people have to do in order to make our movie experience satisfactory. Like when we were talking about the Jarhead Abrams tanks...it's a necessary evil for Hollywood vehicle wranglers to dress up an English Centurion to look like an M1A1 simply because unless you're Spielberg, it's very hard to get the DoD to lend you a real one for a show. And likewise, in 1984, it was not possible to get real Soviet AKMs, RPG-7s, and DShKs, so the Stembridge armorers had to find the next best thing. But I also enjoy uncovering these tricks simply because I'm an enthusiast of firearms and military equipment in general, so I always like seeing how Hollywood's people think on the fly in adverse circumstances. There's an art to it, no? -MT2008 02:16, 6 November 2008 (UTC)

Thanks for the correction on the Four Brothers' HK33, it was labeled as a HK41 long before I started editing the page, I just took the screenshot. And also, thanks for the new images, I'm putting up the new M16A2 on pages right now.--Alienqueen11 19:34, 6 November 2008 (UTC)

No problem, every image you upload is great. I also have a question, how do you get the pictures so perfect? Because your gun images are probably some of the best, if not the best gun images I ever seen on the internet. And yea, your new camera really does make a difference, the new versions of the images look great. Anyway, good job on your recent images, and can't wait to see your future M16s.--Alienqueen11 20:33, 6 November 2008 (UTC)

I see, you put alot of effort into your images and that's exactly what makes them great. I agree that alot of gun sites have bad images, some gun books don't have the best pictures either. One problem with some sites is that they also don't use the best examples, like they'll have a picture of gun but it'll have a whole bunch of modifications on it when the unmodified one is what's really needed, and I agree which should replace as many as the old images as possible. And I think visitors do notice your images because if you look at your Remington 870 Riot Model's file page, it has almost 200 views anad it's only been there since Sunday. And good work on the new M4, if you noticed, Hieloco (the user who kept trying to replace your images with "Net" Images) uploaded a version of the ColtM4 file with similar attachments, but yours beats his by by a long shot. And also is that the same M4 you mentioned on MT2008's talk page that the actor dropped? Just wondering.--Alienqueen11 21:40, 6 November 2008 (UTC)

re:M16A2

First of all, thanks so much for the new M16A2! The AR15 A2 picture was nice, too, but I just thought it'd be better to have the real deal, and it's nice that we have it now. AlienQueen's already been getting to work on replacing the old M16A2 with the new one, and I'll help out, too. The Luger is another image we needed - and the fact that it's from Hogan's Heroes is especially cool! As far as the HK91 goes, I didn't notice the shadow, but the new one is fine by me. There's only one that troubles - I think the newer Taurus 85 image is a bit fuzzier compared to the old one.

As far as future stuff goes, I have another recommendation. You know how we have an AR15 section under the M16 rifle page? I'd like to get some more un-modified, basic civvie AR15 variants on there, especially Colt Sporters, because I've seen them used in quite a few movies and TV shows that stand in for mil-spec M16s. We've already got an SP1 with an A2 hand guard that you took for the Heat page, but I think we should also have SP1s without the forward assist (both A1 and A2 forearms) and a carbine with a 16" barrel. What do you think? (Sadly, I have added more guns to your to-do list...inevitable.)

And yes, we definitely have some of the best gun pics on the 'Net thanks to you. I must admit I'm still smitten with the fact that Norinco Type 84 pics are basically non-existent in just about any gun image site around (even World Guns, which is usually pretty reliable)...except here. -MT2008 00:05, 7 November 2008 (UTC)

Actually, one other thing occurred to me, something we need more than the Colt Sporter ARs...do you think you could get some pics of Thompson Submachine Guns? All of our Tommy images are jacked from elsewhere on the Net. It's about time they were replaced. Of course, I know we've already given you a ridiculous number of requests, so I won't bug you too much. Thanks. -MT2008 00:41, 7 November 2008 (UTC)

Sergio Leone Trilogy

I finished the Leone Trilogy yesterday and I was wondering if you could I.D. the machine gun used in A Fistful of Dollars, someone said it was a fake but wasn't very specific. I figured if it was some type of fake movie gun, you'd know best.

Also, excellent Single Action Army picture, that's a beautiful gun. Care to tell me a little about the one you uploaded? Thanks. -GM

P.S. Check out Last Man Standing, I just got that done.

Good job on the Luger P08, it looks great. I don't think the finishes are a big deal, to tell you the truth, I don't even notice it. And it's cool that it was used in Hogan's Heroes, because not only is it a special gun, but someone's destined to make a Hogan's Heroes page eventually, and it will be of a great use when someone does. Keep up the great work.--Alienqueen11 01:13, 7 November 2008 (UTC)

Speaking of LMS, his two .45s uniquely have diamond grips and I was wondering if you could take a special picture of A1s with diamond grips. I made a rough draft picture of what I had in mind.

File:CrossM1911A1s-w-diamondgrips-roughdraft.jpg

Cross placed, fitted with diamond grips.

Let me know what you can do. -GM

re: Taurus 85 & G3

Haha...whoops, you're right. I keep forgetting, but...when you upload a new version of an existing image, IMFDB doesn't instantly replace it. Instead, the old image goes fuzzy for a period of time (which seems to vary from hours to days; no clue why) before the new image replaces it. I saw your Taurus Mod 85 pic when it was in this fuzzy "transitional" phase and the thought slipped my mind that this happens. The filter from my brain to my mouth (or rather, my keyboard) doesn't work sometimes, I guess.

As far as the G3 page goes, it is unfortunate. One thing I find annoying about Wikis is that there's apparently no way to confine an image to a particular section of a page when you use the "align" code, so when we follow page conventions and force an image to shift left, right, or center, it totally fucks up the formatting if the images are bigger than the text (which is going to be common for guns that don't have very many movie appearances listed). The only thing you can do is just add lots of space in between each section manually so that the images fit into the section.

But I do agree with you on one thing...why do we need a regular sporter SR9 with the thumbhole stock? Have you seen a movie with one? Do you or any of your fellow armorers have any in stock? Better yet, is there any movie or TV show that would NEED some heavily neutered civilian version of a G3? I kinda doubt it, so I would say it doesn't make sense to include the image. -MT2008 06:18, 7 November 2008 (UTC)

Well, I ditched the other two SR9 pics. Til we get movies with them (and I know I haven't heard of any yet), no point in having them on there.

Nice that you found those long-barreled AK folders. I'm pretty sure that Vollmer had at least one at sale (years ago, back when their sales site was still online), but they are quite rare in this country indeed. As far as the pics from World Guns go...it's a mix, just like here. Some of them are pics that the site's editors took themselves, others are jacked from other sites, and some are scanned from books or gun rags. I've usually just used them because (before us), they were one of the most comprehensive gun sites on the net. But I definitely think that because of you, IMFDB now has not only good movie gun images, but some of the best gun images, PERIOD.

Good luck on your current projects, and don't let those idiot Obama-supporting actors fuck up any more of your guns. -MT2008 00:06, 8 November 2008 (UTC)

The special page

Remember how a while ago I asked you if I could try making a page that explained to new IMFDB users just how significant it was that we have a movie armorer who photographs his company's guns for us? Well, I finally got around to trying it out. Here it is:

MoviePropMaster2008: IMFDB's Own Armorer

The title is kinda cheesy, I admit, but it was the best I could think of. The other issue is that I'm not always sure my facts are straight, so if you want to correct anything, go right ahead. And I realize this might be kind of a lame idea - but I just feel it's important for everyone to understand how important your work is to this site. What do you think? -MT2008 01:32, 8 November 2008 (UTC)

Oh, trust, I fully understand what you mean about wanting to remain anonymous. Even if you weren't a pro-RKBAer working in an industry that is hostile to gun ownership (and non-liberals in general), it would still be perfectly reasonable to want to remain anonymous. When you're a professional of any sort, working in any industry, you don't want to do post something on a web site under your own name that could get you in trouble. As far as the page goes, however, I don't think it should be too big a deal for your anonymity as long as you avoid giving us your name. It's mostly just a way for us to brag that we have someone who can provide us with such great pictures, and to make sure that our new users understand the significance of those pictures. :-) But if you really are uncomfortable with it, that's fine, too...I can ditch it. It took all of 15 minutes to make.

BTW, I dunno if you're OK telling me this or not (if not I understand), but are you a member of the American Entertainment Armorers' Association? I remember Dan Shea announcing its creation on a forum I used to visit, a couple years ago now. I understand that it was created specifically to address the threat from Cali's gun laws upon your businesses? -MT2008 01:35, 11 November 2008 (UTC)

More SAAs

Your Colt Peacemakers are great, my western pages greatly need them. Thank you, thank you, thank you. Be sure to check out Hellboy II: The Golden Army, I just finished it. -GM

Image use on WIkipedia?

Hi, I am an editor on the English Wikipedia. I came across this great site as it completes the media appearances lacking in our firearms pages. You've got some fantastic images of some obscure equipment in the idea configuration - that is, clear background and side profile shots. These would really help us illustrate some of our pages that are lacking in media content. Would you be kind enough to allow us to use these images on Wikipedia? We could upload them under an attribution license and provide a link to this Wiki in return. Kind regards, Koalorka from the WP:Firearms teams. 99.232.219.131 12:09, 18 November 2008 (UTC)

Any chance of obtaining a response? I can be reached at koalora at rogers.com. 99.232.219.131 12:09, 18 November 2008 (UTC)

If you are hesitant or have any further questions regarding licensing, feel free to ask. Wikipedia is by principle an entirely non-profit organization as you are probably aware and we could not compensate you financially for the images. I do recognize that there was some considerable effort involved in collecting some of these rare specimens (still salivating over the CETME Ameli) and then setting up a studio with professional lighting, hardware etc. What we can offer to do is attribute you properly and generate additional traffic and awareness for this site and any other organization you specify (even the armory/studio that owns the firearms). If you agreed to have your images uploaded to our server, every one of them would be licensed under a Creative Commons Attribution-Share Alike 3.0 Unported license that requires the copyright holder to be properly credited every time the image is displayed, in either modified or unmodified form. The license does not impair or restrict your moral rights. Here is the license description. We can do a "test" image so to speak, upload an individual image to see if that satifies your expectations.

In other words, don't make me beg.. :D At least the Ameli, pretty please.

Regards.

To Koaloarka, I appreciate your kind words and gracious offer. As you can probably tell, I've been thinking about the offer. I'm obviously not jumping at the opportunity or else I would have communicated much earlier than now. I must assess what I've been trying to do for the last six months. Since I joined IMFDB I've been working extraordinarily hard to provide the site with exclusive gun images that are available nowhere else. Everyone here knows the hard work, time and $$ spent on trying to get the best quality images of the weapons available anywhere (on the net). And obviously I do it for the benefit of IMFDB. I'm torn by the upside of increased awareness to the site, but I am also not eagerly anticipating the inevitable diluting of the 'exclusivity' of IMFDB's images when they start showing up everywhere on the web.

Some background to my thinking - I would not have done the images for a simple firearms site. I probably would not have worked so hard for six months to get these types of images for a gun wiki. IMFDB's unique focus is that it mixes weapons and CINEMA, especially movie trivia and factoids which are not part of the 'regular gun owner's lexicon. That is the field I'm in, and I welcomed the idea of a place where I can contribute my experience and information (mostly 'lost' on the 'regular firearms crowd'). Many of my images are hybrid guns (M16a2s with A1 features or vice versa), or some of custom guns made for the movies (Custom Type 84s or AMD-65s), or weird combinations of uppers and lowers (like the M16 variants, or the 2 toned handguns,etc). which are not factory standards nor are they historically accurate. I remember once, when a firearms historian and enthusiast looked at some of my handguns (SIG P226s and USPs) and was wondering what was wrong with my barrels. He didn't fathom nor appreciate the fact that these were REAL movie guns. He was just disdainful that they were 'ruined' because of the customization needed for blank firing in movies. Anyway, I was toying with the possibility of a limit release of images with a specific watermark or copyright. I was thinking of using similar but not identical images (but still identifying IMFDB.org as the source of the image) with a translucent copyright logo, but that would take some time. But I have not decided yet and I hope you understand my reluctance at this time. I've only been doing this for six months and I don't think I'm ready right now to 'give away' the work I've done when I'm not complete updating the gun images for IMFDB. Perhaps when I've stopped or retired from getting gun pics for IMFDB ....

Now there are some sites who already have MY permission to use some MY images, but each one of those entities provided weapons to be photographed, so they helped me personally with the photography itself. (some FFLs, a few collector friends, other armorers, etc.) So you might see a recognizable shot somewhere else, but they will be watermarked and copyrighted as license granted to that entity.

Anyway I'm still thinking about it. Give me a little time. I am also conferring with other Administrators of IMFDB and I welcome their input. Ultimately, I will have to make some sort of decision (as the original photographer and copyright holder) as to where I wish to release the rights. Hope that helps.

MoviePropMaster2008 02:31, 20 November 2008 (UTC)

I agree with what you say about how many people in the gun-owning community aren't going to appreciate what these guns are if they see them on any random gun site. Like, who the hell is going to understand that in Hollywood, HK91s are converted to look like SR9s, or AR15 SP1 carbines converted to look like XM177s? However, one thing I think you should consider is that some of the guns you've photographed are hard to find pictures of, and your pictures represent not only good "movie gun" images, but good gun images, period. The Type 84 pics you've taken are a very good example, because like I said earlier, good pics of the Type 84 seem extraordinarily hard to come by. The new FG42 image is also one that I think can be considered particularly special.

I would say that at the very least, you should consider it on a case-by-case basis; whether the gun image you have stands as both an important gun image as well as an important "movie gun" image. But ultimately, these are your images, so the decision is yours. Take my opinion only for what it's worth. -MT2008 03:50, 20 November 2008 (UTC)

I was not asking for a blanket-release of your work into the public domain or any such thing, just a few individual photographs of authentic and obscure and unmodified firearms, i.e. the CETME Ameli, FG42. Cheers. 99.232.226.200 18:11, 21 November 2008 (UTC)

I KNEW that. But work on Wikipedia WILL be jacked and seen all over the web. And the more removed the image is from the original source (here) the harder it is to force people to remove pirated images on their own sites. I fully intend to slam pirates who steal my images (which is my right), but it's harder when they can say "Oh I got it from Wikipedia, who are you? What authority do YOU have to tell me not to use a stolen pic?" It might be helpful to make a list of what you are interested in. I am considering creating an alternate image of the same gun with watermarks and attributions for 3rd parties (though it's not something I was planning to do at this time). Let me know your list and we can discuss it. thanks MoviePropMaster2008 18:21, 21 November 2008 (UTC)

The attribution license is for that purpose specifically, if you are not properly attributed when the image is displayed, that person has violated your rights to the image and is liable for prosecution under international or US copyright laws. Keep in mind that those willing to pirate your images will do so whether or not you agree with it, this will happen at a higher frequency once your sites gains in popularity; by letting Wikipedia use your images, your images will proliferate the net with the proper license, exposing your work and Imfdb.org to the mainstream. Right now, we can do just one image to determine if you'd be satisfied with the end result; how about the Ameli? The CETME Ameli page does not receive too many hits due to the scarcity of the gun. Kind regards. 99.232.226.200 19:28, 21 November 2008 (UTC)

Any progress here? You asked for a list, we would just like the AMELI at this time. Regards. 99.232.219.131 17:21, 26 December 2008 (UTC)

Smiths

Thanks so much for the Smiths, but especially the Model 29! All the ones on the page before now were 629s, and I figured we needed an original blued M29. In fact, it seems almost like blasphemy that this is exactly what Dirty Harry used and we haven't had the right gun until tonight. -MT2008 06:04, 13 November 2008 (UTC)

Oh, yeah, forgot about that other S&W 29, hehe. But still, an MPM2008 photo of a Smith is always preferable to some random image from Google. And to answer your question - yes, you should feel free to replace old pictures jacked from Google with yours. There's no reason why anyone should complain, because...

(A.) Your pictures are always vastly superior to the old ones
(B.) It takes no effort to copy an image off the web, whereas taking your own pics is a time-consuming process (especially the way you do it)
(C.) You're an administrator now, so you have the final word anyway.

As far as the other Wiki guy's offer goes, I agree that you should only do it if you can mark the images as your own first, or if they give you proper credit (and link to this site, guaranteeing us more hits :). Come to think of it, it might not be a bad idea to do that with ALL of your gun images from now on, just to make sure that we mark them definitively as ours. But although I like being able to think of your gun images as exclusively IMFDB's, not so sure I like the idea of clamping down on other users. I mean, let's face it, we'd look like hypocrites because many of the images on IMFDB are still jacked from other sites (though this will change eventually, of course). World Guns would probably throw a fit if they saw this site. -MT2008 01:08, 14 November 2008 (UTC)

Well, I suppose you're right...if World Guns did ask us to remove all of the images we've used without permission, I would immediately comply with their request. However, you gotta admit that it's still going to be kind of flattering if people decide that IMFDB is a great source of gun images (not just "movie gun" images) and want to use our pics.

BTW, have you talked to any of the other armorers about IMFDB? -MT2008 04:04, 14 November 2008 (UTC)

Predator

I never knew they tend to used A1 muzzle breaks but it does make sense, A1 star flashes look cool (I'm still in awe over the shot when the muzzle flash is out 2ft in each direction)

I hope you don't mind that I edited your pictures together, I just used what I had. I'll just leave them on the page like that until you take some SP1 pics. Thanks. More to come on the Predator page. -GM

Same film different subject. Do you know who mounted the Shotgun under Billy's Rifle. It looks like a Ciener Ultimate only it uses a Mossberg 500 and it's several years before Jane's says such systems came out. Rockwolf66 08:31, 25 December 2008 (UTC)

Hollow Point

Thanks for the Type 84S specific to the Hollow Point page. I really apprieciate it. Was the gun actually used in the movie or do you mean it is made to look the same? -GM

The Mask

I have it on my list, so I'll get it done eventually. -GM

Alienqueen11 here, sorry if I got in the way when you were uploading gun images when I was uploading those Resident Evil screenshots. --Alienqueen11 00:38, 17 November 2008 (UTC)

Thanks for the new guns

I really like those new SIGs you uploaded (just ditched the old P220R image and replaced it with yours on all pages), as well as the Type 84 folder and the Madsen M50 (the movie City of God features those, so we gotta get that image on that page whenever someone screencaps it).

Also, can you by chance tell me what kind of shotgun this is (from my page for The Crow):

Error creating thumbnail: File missing

Who makes that bullpup stock? I think it's a Muzzelite, but I dunno, and a Google search seems to turn up negative for info or images on this gun. I know I've seen it in at least a couple of action movies from the 1990s. -MT2008 03:07, 17 November 2008 (UTC)

Ah, OK, thanks for clarifying the type of gun used to kill Lee. I figured it was the 629 that killed him because I have heard from various articles that the gun was definitely a .44 Magnum, and the character of Funboy uses the 629 throughout the movie. Any idea why they switched to another gun for that one scene? Seems like it would have been identifiable as a continuity error had the scene been finished and Lee had not been killed.

And don't worry; I do fully appreciate (have heard it many times) that the entire reason that the accident happened was because the production sent the armorer home in order to save money. And I have heard it was the fault of some clueless property assistant(s) who were responsible for the fuck-up that got Lee killed.

Also, I appreciate the ID on Grange's shotgun. -MT2008 02:13, 18 November 2008 (UTC)

Re:Dibbs

I didn't think of it that way but I completely understand what you mean. I'll change the word. Dibbs is kind of declaring it is mine, simply saying that a movie is on my to-do list changes it sort of. The only movies I would really want to declare "dibbs" on are the ones I ordered on DVD, even when I own them on VHS already, just so I can screencap them. I'll remove my dibbs messages and just let people know I plan to do it, and if no one else plans to do it, I would like to. "Dibbs" was simply a poor choice of words. It's not like I'm locking the page from someone else to work on though. When Orca1 9904 asked to do Tears of the Sun, I let him. (AQ11 even cut off the widescreen bars now). When you asked to do Rambo III, I let you. (P.S. Let me know if you need me to finish that.) I agree tho, it was a dumb idea. P.S. I screencapped Iron Man, sorry. -GM

One more request

Hey MPM2008, when I asked for the Beretta 92FS Inox, I happened to notice GM45 asked for a reversed Two Tone Beretta 92FS for use on the Sin City. If you happen to get ahold of them, I would like to know if you can combine them the factory style way as well and photograph it if you can, because a Beretta like that would be useful for pages such as Hostage (2005). Here's a screenshot of the gun in the movie:

Error creating thumbnail: File missing

Thanks in advance.--Alienqueen11 01:42, 19 November 2008 (UTC)

That's an awesome shot as always, aAnd you're right that has to be the best shot of the gun on the entire internet. I like it the way it is, and excellent work on your most recent images too, I really like the M16A4. Also, are you still considering the Wikipedia user's offer?--Alienqueen11 01:53, 19 November 2008 (UTC)

AK-104

It looks great. The magazine is no big deal. Even with that magazine, you still have the only well-taken AK-104 on the net. Don't worry about fixing it right away, it looks awesome even with the wrong mag. One thing though. You never know when one day a movie could have an AK-104 with a waffle mag so don't just cover over it if you take a new pic. You replaced the MAC-10 with the after market mag with the newer image, but you never know when one could be seen using one. Just a pointer. I'm almost done with Hot Fuzz, then I'm gonna do Tropic Thunder, Crank, Shawshank Redemption, and The Dirty Dozen. Should have them all done by the end of the month. (With deer season, my job to fix guns has been pulling me away. Plus, I hunt myself on occasion.) Keep up the good work. -GM

If I use the word "sexy" to describe a gun picture, what does that say about me? LOL.

I like it. And I agree with Alienqueen; I wouldn't worry too much about the mag. However, I must say that I'm a little more excited about some of the other pics you uploaded while I was at work today...thanks so much for re-doing that Type 56-1 picture for the Goldeneye page with the AK-74 muzzle break and plastic mag, and I also really appreciate you getting the Benelli M1 Super 90 (oddly enough, we don't have a page for that gun, for whatever reason). And the new XM177 pic is something we REALLY needed; time to ditch that old XM177 picture we've been using to represent "Colt Commandos" in movies (I think it's actually a Tokyo Marui airsoft replica, anyway).

But...for now, I must do more GRE studying and personal statements for grad school apps. Sadly, I'm getting way too busy to make regular contributions these days, but real life keeps calling. -MT2008 02:44, 19 November 2008 (UTC)

I wouldn't worry too much about the stock, because if you notice every image you upload always finds a use. There's no telling if a movie will come up with an AK 104 in the same configuration, plus if it's a movie gun, the movie it was used in will have to come up eventually. But if you want to upload a new one, that's entirely up to you.--Alienqueen11 02:50, 19 November 2008 (UTC)

So finishes can cause that much trouble when combining parts? Makes you wonder how they do it because I see soo many Berettas in wierd configurations in movies, I remember seeing a Beretta 92FS Inox with a black barrel in Kiss of The Dragon. And also, how rare is it to see a two tone Beretta 92FS? Because even if you search it on Google, there aren't many images of one.

And about the FG421, that is one wierd looking gun, is it German made? Because it resembles the MG42's from Saving Private Ryan a little bit, but I must say the grip dosen't look too comfortable with the way it's positioned. But another great image none the less.--Alienqueen11 04:18, 19 November 2008 (UTC)

FG-42

Nice piece. It must be rare, I don't ever see them in my typical order books like Southern Ohio Guns or any other vintage firearms catalogs. Like AQ said, I think the grip is positioned ackwardly and seems uncomfortable. Like all the other cool German guns, I can't own it sadly. I don't see why they would make it a paratrooper gun, way too big. Nice pic. Glad you didn't ignore it in the back. -GM

No Problem

You're welcome. Despite not being such a great movie, it was quite interesting gun-wise :))

Taps and Mr. & Mrs. Smith

I don't own Tapps and have never seen it but I own the Extended Cut of Mr. & Mrs. Smith, which includes a scene with a Mini-gun and cool other things. It is on my list and once my to-do list pile is reduced, I'll get on it. Right now I'm working on Tropic Thunder and The Shawshank Redemption. -GM

The FG42

Damn, that thing is beautiful! Reminds me why one can never fail to give the Nazis points for ingenuity when it came to weapons. I seriously want one, along with a Sturmgewehr. Good news though! Have you heard about this? http://www.ssd-weapon.com/engl_web/produkte_en/fg42_en/fg42_en.htm Apparently, they've got civvie reproductions of these guns now! Dunno if/when they'll get imported/manufactured in the States. -MT2008 03:57, 20 November 2008 (UTC)

Your choice, I guess. Are they being imported to the states yet, though? The site doesn't list a U.S. distributor, and I haven't seen any for sale yet. But yeah, it would be cool to have a picture of a nice new FG42, plus you can get the 2nd version which you told Alienqueen you didn't have.

BTW, speaking of rare German weapons, do you have access to a Sturmgewehr (either -42 or -44)? There aren't too many movies with them that I'm aware of (besides Escape to Athena), but they do appear in lots of WWII-themed games. -MT2008 01:51, 21 November 2008 (UTC)

Remington 870

Closest thing I can find is this bird gun in The Unit.

Error creating thumbnail: File missing

I read your story on Brandon Lee, that's tragic. I sometimes make dummy bullets and I always fire the primers before I reload the bullet. Your supposed to use super glue to make sure the round stays in the brass. Then you go to a wire wheel and polish the brass and get rid of any super glue that seeped out. I wonder why they never made "dud" primers that could look live but not go "bang" when the hammer falls on them. I first made dummy rounds with 8mm rounds for my Kar98k, but I didn't super-glue them in, and eventually they all fell into the shells and got stuck. It sucked. I'm sick with something bad and Tropic Thunder is gonna have to wait because I feel like crap. Have a good day. -GM

Re:Morita

Thanks, I'm feeling a little better. I was filling out some of the fictional firearms pages and I figured of all of them, you'd like the Morita page since I remembered you said you owned one. I deleted my page because yours came out better than mine. You know more about the movie any way, I have yet to see it fully and last time I saw it was too long ago to remember. -GM

Nice SMLE pic! And I forgot to mention, the Colt Navy is beautiful. -GM

Bankok Dangerous

You made the page look much better now. Your shots are far clearer than mine. Thanks. -GM

Tropic Thunder

A Sporter II pic would be much apprieciated. To test the whole blank safety distance, I tested various blank calibers to a piece of paper and found 10 yards to be the dead zone. Since I'm trying to make a movie with a few friends of mine (maybe something to show a film school), I'm going to use some blanks and want to know my limits. Obviously, since I'm the only one with true experiance and weapons intelligence, I'll be handling the blanks, post-production edits on my computer will fill the rest. I'll try my best to make them look like they know what their doing with guns, but they are pretty dumb. If you have any movie making tips, please let me know.

P.S. I plan to make it a DVD and might even screencap it as a section on my profile. -GM

Re:590

Go for it, fine by me. Your pics are always better than what we find on google. -GM

The new Cobray M11 picture

The new Cobray M11/9 picture looks really cool! Thanks so much for that! Also, do you think it's appropriate to classify the M11/9 under the MAC-10 page? I have been thinking about giving that guns its own page for a while now. What do you think? -MT2008 17:02, 22 November 2008 (UTC)

First of all, I completely missed the MAC-11. I've just been getting busier and busier (currently at work - on a Saturday! - indexing prior art PDF files now), and you upload so many images that I've missed a few here and there. I did like the SG550, though, and the the AMD-65 pics were also something nice (it's cool that you found the same style BFA as the Israelis). But that Type 56 is just...ugh, who the hell treats a nice gun that way? (in Africa or Afghanistan, sure, but not here in the states!) It's odd because I had no clue that the Type 56 was imported to the U.S. back when Uncommon Valor was filmed (82-83). I remember hearing it wasn't until 1984 that they reached these shores.

As far as the Cobray page goes, I know what you mean about the mistake, but then again, we have the Taurus PT92 page separate from the Beretta 92 page even though the PT92 is commonly mistaken for the 92F. The best thing to do would put a note at the top of the page suggesting people look at the Cobray page just in case.

Appreciate the effort on the Thompson pics...like I said, we REALLY need some good ones. I hate the fact that someone put an Auto-Ordnance semi-auto Thompson clone with a long barrel to represent an "M1921". Also, from now on, whenever you upload pictures, please do the same thing you did with the Cobray; just upload them as a new version over the old ones. The way, we don't have to go back and replace the old image with your new image on every single page that has the old one. And like I said before, nobody should mind if you get rid of the old images, because yours are always better and you're an admin anyway. -MT2008 21:55, 22 November 2008 (UTC)

Yeah, it makes sense, what you're saying. Were the Type 56s from Deer Hunter also the same as the ones from Uncommon Valor? I mean, let's face it...you don't see that many Chinese AKs (or AK-type firearms, period) in American movies before about the mid-80s. -MT2008 22:26, 23 November 2008 (UTC)

That Type 56

Holy shit, who handled that gun to make it that FUBAR?! One of my main jobs in my dad's shop is to clean up guns, so I understand how horrible that is. Mail it to me, I'll clean it up. -GM

Woah, that thing looks like it's 70 years old with every thing it been through. What did they do to it? I'll give it credit for one thing, that's a very good example of how durable and rugged an AK type assault rifle can be, especially with that kind of treatment.--Alienqueen11 02:25, 23 November 2008 (UTC)

Couple of questions regarding Walther pistols

1) Has the current-generation P99 been converted or modified into a movie blank-firing gun that you know of? I ask because I see on the back cover of one of Wesley Snipes' DTV movies that he's holding one that appears to be a new-model P99, but it also looks like they took an UMAREX airsoft model and painted the tip black. Insight?

2) Word on a couple of forums is that the Walther PPS makes an appearance in Quantum of Solace, wielded by Olga Kurylenko. If possible, could you confirm? --Clutch 02:41, 23 November 2008 (UTC)

I don't know, but I will keep it in mind when I ask around. MPM2008

Request

Revolver here Just curious, could you get a good picture of the M4s used by the Air force in Iron Man? The ones with the ISM-V Scopes? Possibly other pictures from the movie? Like the G36Ks and G36Cs?

I'll add it to the gigantic list of things to do. best regards. MPM2008

.577 Rifle

That would be awesome. Do you think you could one pic before he mounts a scope and one when he does? You'd have the best picture of such a rifle on the internet. Gunmaster45 00:42, 25 November 2008 (UTC)

Another Request

I was wondering, would it be possible for you to get your hands on a stainless steel Jericho 941? There's at least a couple pages here such as The Kill Point and Transporter 2 that could benefit from it. I'm also still waiting for a 1st-gen Glock 19 (or whichever version of the 19 it is that doesn't have rails on the frame). Thanks in advance. Orca1 9904 21:29, 25 November 2008 (UTC)Orca1_9904

I didn't know it was an order, rather than a request (re the Glock) and I don't have a 2nd gen of my own or I would have posted it already. I have to track down someone with one and take the time to do the photoshoot, a real hassle BTW. MoviePropMaster2008 23:25, 25 November 2008 (UTC)

About Png

Hi, for some strange reason VLC does not catches screenshots in jpg, only in png. In the future I will convert them in jpg before uploading. Fimvit

Re: Goldeneye

That's fine. In all honesty, it's a bad habit that I'm afraid I have, and I seem to be influencing other forum members to do it even though it does ruin the "encyclopedic" format of the pages, as you've said. I'll try to remember in the future; bad habits die hard for me. -MT2008 23:31, 25 November 2008 (UTC)

Re:

I know, I had already changed the settings. Regardless, it takes the snapshots in png. Can't figure out why... Kind regards Fimvit

Crank

Hahahahahahaha, Blu-ray. I can't afford half a Blu-ray player. I'm still using DVDs, I guess this one just looks a little better. I've noticed some people use png files now, but they take too long to load and if you click on the image, it's just as clear as a jpg, so that's what I use. Thanks. Sorry I'm taking so long with it, I keep getting sidetracked. Go check out AQ11's profile talk and see my list of movies in my pile. Ugh. It's gonna be a long month. -GM

Thanks

Thanks so much for the new images (i.e. the USAS-12), and thanks for getting the Benelli shotgun page in order. It really needed an overall badly, and it's crazy that we never even had an entry anywhere for the M1 series before now. Also, nice work on Ultraviolet; I've had that DVD in my collection for a while, but, like a lot of movies, simply never got around to capping it. No matter; yours are better than mine would have been.

Hope you've had a great Thanksgiving! -MT2008 04:48, 28 November 2008 (UTC)

Yeah, I agree, the Molotov cocktail doesn't need a page. This is the Internet Movie Firearms Database, not the Internet Movie Weapons Database. Also, dunno if you saw, but some anonymous user tried to delete your user page, and has thus been nuked. -MT2008 22:14, 28 November 2008 (UTC)

Oh, yeah, almost forgot...I'm not really sure how to see page views besides going to "Special Pages" (under Toolbox on the left side) and there's a "Popular pages" section, but that's not quite what you need... -MT2008 18:41, 29 November 2008 (UTC)

Re: Molotovs

I understand what you mean fully but many pages link to the Molotov page and it's one of those mistakes that kind of has to be there now. I'm making The Whole Nine Yards as we speak and that had a molotov. I don't think it is a weapon deserving a spot but too many pages already have it and it's just easier if it is there. Gunmaster45 22:58, 28 November 2008 (UTC)

Question about the SIGs from Double Team

First of all, nice job so far on the Double Team page, even though it's not yet complete.

Anyway, I was looking at this picture:

Error creating thumbnail: File missing

What type of laser controls are those on the grip of the SIGs? I ask because I've seen the same setup on a SIG P228 that Denzel Washington uses in the movie Virtuosity, and I was wondering who makes it. Or was it something done just for both movies? -MT2008 00:07, 2 December 2008 (UTC)

The Thompsons

YES! They're awesome. Thanks so much...we really needed some good pics of Thompson SMGs. -MT2008 18:12, 3 December 2008 (UTC)

Response (Sorry for being late)

Thanks for wishing me a Happy Thanksgiving, I hope you had a great one as well. As for improvised weapons, I agree with you, Propane tanks even though they were made to be bombs shouldn't be listed as weapons. But I agree the molotov should stay since it's already a page for it and it's on quite a few pages. Also good work on Starship Troopers, the page looks great, and the Thompson pictures are great as well. Keep up the good work.--Alienqueen11 03:05, 4 December 2008 (UTC)

Thompson

Sounds good to me, we need some Thompsons. - Gunmaster45 21:22, 4 December 2008 (UTC)

Please, in the future, never hesitate to replace the old pics with yours. Yours are always better, plus when you just upload over the old ones, we don't have to replace the gun pics on each movie/TV/video game page individually. -MT2008 23:49, 4 December 2008 (UTC)

Good Job

Good job on replacing all the Thompsons, the new pictures look great. Also, are you still going to upload an M16A3? And also did some of the M16 type guns you uploaded come from Iraq? I mean like the M16A4, and the M4A1 with the scope and RIS Foregrip.--Alienqueen11 02:02, 5 December 2008 (UTC)

Taegukgi

I can barely stand anime let alone flash animation shorts. I think it disrespects the hard work we do to screencap movies (and you great efforts to make sure we have images galore) and we have a page for some little short? I don't see why someone would watch it and wonder "Would someone like to know what guns are used in this?" Maybe if someone froze and capped the short it MIGHT be acceptable.

P.S I've been working on Wanted for 2 days, there are so many guns and continuity errors (guns switch to others in seconds), it is driving me crazy. While most I can figure out, some user input such as your own would be much apprieciated. I feel like I'm lying to the people who read my message at the top of the page that says "I'll have it done today" and can't because I busy. I hope they all understand. I'll make sure I give them the excellent page they've been waiting for (and get rid of the abismal bootleg images). - Gunmaster45

I think at the very least, a re-direct is in order. The flash animation should be something like "Taegukgi (Flash Animation)". But personally, I'm really kinda skeptical of including stuff that's not professional media. Next thing we know, any kid who makes action movies with his friends and their airsoft guns is gonna try and make an IMFDB page. This is an even bigger problem with mods for first-person shooter games, because there are lots of user-made mods on the 'Net.

That reminds me...when I get done with the GRE, I need to get the FAQ done that I've been meaning to do. Once I draft it, I would like all the Admins on here to take a look, and we should all agree on particular terms. In it, I will specify rules on stuff like including Flash Animation. -MT2008 04:19, 6 December 2008 (UTC)

Agreed. I have already warned several users that I will not allow images from bootleg copies of movies not out on DVD to be posted on IMFDB, but I missed Tunnel Rats because I had no idea what it was or when it was coming out. -MT2008 21:25, 6 December 2008 (UTC)

I also think Anime is ok because it is something licienced, and more official. It's like saying Anime is to films and TV shows is to Flash and Fan made shorts with their home cameras and posted on youtube. I mean, should we start looking up shorts that people film themselves and then upload on Youtube? I don't think so. It's annoying, kinda insulting and a waste of time at the same time to even think of it. I do some of the Anime because I believe how they draw the weapons make them worthy of mention and images worth showing to see how real they drew them. Excalibur01

Care to take a look at my RE:E movie page?

Since no one did this page since the DVD release, I decided to do so. I need some check ups cause I always have a hard time telling Taurus from Beretta. Also see if you can ID the Cobray M11 for me if it is one. The previous guy posted up and even I thought it was an MP7 until I looked closer. Excalibur01

Resident Evil: Extinction

I can't be nice anymore

Someone has to draw the line. This guy Don whatever. He just posted a NEW flash animation on this site. What the hell? I've see the pics or trash that resembles pictures of guns and he thinks those are what they are? Is he high or some punk kid that thinks it's so cool that it deserves to be on this site. Sift Head and that other flash animation thing, Taegukgi. Those are pardon my language, pieces of shit that are NOT worthy of this place that some of us hold with respect. Yeah, they seem entertaining, but if we decide to let something this slide, then whose to stop from putting other flash animations that have "drawings" of guns on them because "Oh they have guns, so therefore they should be on this site". I want to remove it, but I like a majority vote instead of me acting pissed of. I'm asking everyone else their thoughts. Excalibur01 02:05, 17 December 2008 (UTC)

My airsoft

So what do you think of my airsoft? I know a lot of people have a bad idea about what airsoft is, so what do you think? I'm a guy who likes to show off sometimes, that's one reason why I ask since I've updated pictures on my page, but more to ask what others think, particularly people who are more into firearms. Excalibur01 02:34, 20 December 2008 (UTC)

Just the same, I know you can tell my ONE Glock is real over the others listed that aren't. I don't go to the range as often as I want. Bullets are expensive and so is renting time on the range closest to me. I only play with Airsoft because it's the only time where I get to shoot people and not feel the slightest remorse whatsoever. I'm killing them in a manner of speaking. I have ran into the types of guys that only knows Airsoft brand names. I on the other hand am really interested in the real life counter parts that inspires Airsoft, this is where I found out so much info on real guns...but I still have trouble telling Berettas from Taurus and between shotguns sometimes. Excalibur01 10:23, 20 December 2008 (UTC)

FN FAL

Could take a picture of an FN-FAL?Oliveira 00:04, 22 December 2008 (UTC)

Re:Predator

Thanks, it wasn't on my list but I saw the page was incomplete so I made time for it. Sorry I edited your pictures, but it looks better than an empty spot for now.

Also, excellent job with the Uzi pic, it looks great. I too never liked that Uzi pic before. I just finished screencapping Unforgiven so be sure to check that out. - Gunmaster45

Winchester 1866 "Yellow Boy"

Do you think you could check your armory for a Winchester 1866 "Yellow Boy" rifle? Also, a lot of the ones in films are used as Henry rifles by removing the forend, the advantage being the lack of a spring follower pinching the shooter's hand. So if you do find a Yellow Boy, could you remove the forend and snap a shot of that as well? Thanks. - Gunmaster45

H&K USP and H&K MK 23

Could you replace the pictures of the H&K USP .45 and the H&K MK23 with better images. Thanks.

Type 84 Target/Match

So you finally got to take pictures of them. Nice! -MT2008 01:19, 25 December 2008 (UTC)

And thanks for the new .308 Valmet. Those appear in lots of movies, so I can use it on my Hard Target and The Negotiator pages.

The HK94/MP5 conversion

Thank you so much for this! I wanted it as much as GM did. Where did you find it? And you've actually confirmed already that it's one of the Air Force One MP5s? -MT2008 03:38, 26 December 2008 (UTC)

Nah, of course that doesn't ruin it. If it's a movie gun, and it's the same type of conversion seen in those action movies from the 1980s and 90s, it's fine by me. It's the same type, and that's more than enough for us. As far as Jedi Mind Powers, yeah, I guess I got something like that. Actually, I've just been glued to Facebook extending Christmas wishes to people most of today, and I check IMFDB pretty regularly. Also was working on 24: Redemption earlier today.

As far as your watermarking idea goes, I encourage it. However, there may be some way to actually disable right clicking on just your images so people can't save them to their HDs and re-post them later. Or, there may be a way of embedding copyrights into them. Not sure. But we'll figure out something. Asking Bunni about this would be the way to go, I think.

Hope you've had a great Christmas. Over here on the East Coast, I've only got 1 hr. left before it ends, but you're in Cali, so I guess you still get a few hours left to enjoy today. And thanks for all the wonderful Christmas presents you've given IMFDB (again, I appreciate the HK94, the M78, and the long-barreled Type 84s). -MT2008 04:08, 26 December 2008 (UTC)

The HK94 is great, I felt really bad chopping your pictures. Now I can get rid of them. And I read about your water marking idea. You should put one of your own personal insignias and maybe an imfdb logo. I hope you had a happy holiday. I got lots of movies to screencap including The Great Escape. I'm going to buy Romeo + Juliet and a few other gun movies with the money I got as well. I'm stilling working on Starsky and Hutch right now though. Great work with Stripes btw, I loved that movie. - Gunmaster45

Terminator 2 page

What do you think of the T2 page? Did I over do it on the "fun facts"? As far as the guns go, did I get my info right? Colt Commandos are kind of hard to ID for me. Hope you have a happy new year. - Gunmaster45

re: the images

First, thanks again for the new images. It's nice to have a USP45 (especially since Collateral is one of the more popular pages on here, and Tom Cruise used one in that movie). The FNC is another nice one to have. Did you ever find out if the Heat FNCs were chopped-down Sporters with auto sears and M16A1 flash hiders installed, as you suspected?

As far as copyrights go...yes, it was inevitable. I know people have been talking about IMFDB and its images on quite a few gun forums, but I had no clue anybody would have the audacity to take your images and claim them as their own! How has your electronic tagging worked? Any particular software you used? The last time you and I discussed watermarking, I did a quick search for software that might be used. I found this: http://www.filetransit.com/view.php?id=10611 . But if you have a better one, that works, too. I do think you should start getting the images tagged ASAP, because I don't think people should be stealing your stuff. I still do worry somewhat about the "hypocrite" accusations, though, but as long as you keep getting new images up, especially for well-known guns (like ARs, H&Ks, AKs, Glocks, 1911s, etc.), those cries will have little validity.

Anyway, sorry to add to your growing list, but I have another request. I recently did a major re-vamp on the Accuracy International Arctic Warfare series page, which used to be called just the "L96A1" page. All of the gun images I have on there now are jacked from Remtek's Accuracy International site, which I hated doing, but had no other choice. If you get a chance to photograph any of the AW rifles in your company's inventory, I'd be most grateful. I'm especially interested in the basic AW and the AWP (because my Jericho page has the latter), but anything else you have in stock would be great. Thanks so much for all your hard work. -MT2008 18:55, 30 December 2008 (UTC)

The USP-45 looks great. As MT said, it will work well on the Collateral page (especially because I'm going to be adding shots to it later) and the FNC is excellent. Bravo. - Gunmaster45

Check IMDB for gun-heavy movies (you won't find specific IMDB forum topics in a Google search). It's very common now to see somebody ask a question about a gun in a movie and some other forum user will point them to us. Last one I recall looking at was "Hitman" where somebody mentioned us. I have also seen people make topics about us on everywhere from the AR-15.com to the 1911 forum to the Firing Line.

As far as reactions go, sorta mixed. Some people draw attention to our mistakes (and let's face it - we had a LOT, especially before you came in), others say we're neat. However, there don't seem to be a whole lot of folks so far who understand the fact that our images are exclusive to us - which is another reason why your watermarking is such a good idea. -MT2008 06:22, 31 December 2008 (UTC)

Thanks

Hey MPM2008, I just wanted to say thanks for all your recent pictures, I really like the USP 45, and the Mossberg 590 Mariner. Thanks to you, Imfdb now has genuine pictues of all three calibers the USP is available in. Keep up the excellent work.--Alienqueen11 04:01, 1 January 2009 (UTC)

Screencaps

I was trying not to do too many shots in Commando since I didn't want to muck up your page but I didn't know your limit was 4. I add so many shots usually because they illustrate different users and different scenes. I don't try to spoil the story but I try to run a path with my images. I was trying to respect your format more than how many screencaps (you'll see I kept the calibers after each description like you do and kept the size image under 600px. I'll admit that LMS had too many shots but don't hold that on me every time I go a little over on my screencapping. Hope you had a happy new year. - Gunmaster45

Re:Finally Got It!

The AKMS pistol looks great. Nice work. I just finished The Mist and X-Men Origins: Wolverine. Now I'm gonna work on Van Helsing. - Gunmaster45

Re:Finally Got It!

That is one Sweet AK! Is that the actual gun used in the movie? Happy New Year By the way.--Alienqueen11 07:01, 3 January 2009 (UTC)

Re:Finally Got It!

It looks awesome! Where did you find? Is it one of Cinema Weaponry's guns, as I suspected? Also, that gun appeared again this past summer in Pineapple Express, so I added it to that page. But nice job. And Happy New Year! Thanks for the wonderful gifts you have given us! -MT2008 15:33, 3 January 2009 (UTC)

Rambo

I noticed you are adding some new shots to Rambo. Do you think you could grab some shots of his knife and bow, since all the othe Rambo pages have them. If you can't, I'll do it eventually. If you can, note that he has two knives. His mini machete that Stallone actually made for the movie and the knife from Rambo II. - Gunmaster45

The Auto 9

You had access to the Auto 9? Wow, I had no idea they had any of them intact after all these years. Of course, Sin City features one, but theirs was actually a modified 92FS, not a 93R. How did you get your hands on this thing? Whatever...nice job, and thanks for the awesome pic. -MT2008 15:57, 4 January 2009 (UTC)

RE: Finally Answering your questions

I understand now, thanks for the reply. So you can basically make it look like any kind of M16 if you have the right parts, anyway I can't wait to see your C7. Also, are you uploading more Mossbergs? Because if you want, I can edit the Mossberg 500 with the Heatshield out of the Comparision picture and upload it if want me to:

Error creating thumbnail: File missing

But if you prefer to upload your own image, it's okay.--Alienqueen11 22:07, 4 January 2009 (UTC)

About the Mossbergs, So you do want me to edit it out? Anyway, A simple Mossberg 500 with a High Capacity magazine tube to replace this image would be nice:

Error creating thumbnail: File missing

Mossberg 500 - 12 gauge

Also, if you can get an image of a Mossberg 500 with a pistol grip like the one in Training Day it would be apprecited. Thanks.--Alienqueen11 22:37, 4 January 2009 (UTC)

Mossberg 500

Hey MPM2008, I cropped and edited the comparison image, and uploaded the Mossberg 500 with the heatshield as a seperate image. I just want to want to know if it's okay before I add it to the page. I wrote that it belongs to you in the image description. What do you think?

Error creating thumbnail: File missing

Thanks, I tried to make it looked as much like one of yours as possible. I'll put on the page now. Feel free to edit or overwrite it whenever you like.--Alienqueen11 22:30, 5 January 2009 (UTC)

The PT92C

Thanks for this! I just put it on the Hard Boiled page. I'm guessing it might even be the same one seen in Gates of Hell. -MT2008 04:11, 6 January 2009 (UTC)

Re: 24 Redemption

Yep, I understand. I was just giving a reason to everyone why I was. I realize you wouldn't make that mistake. I think the page used to have the USPc simply because it appears on the DVD cover, before I screencapped it and generally gave it a huge overhaul. -MT2008 03:53, 7 January 2009 (UTC)

Thanks for the new FALs!

They look great! We can always use more. Only question is...do you by chance have a picture of a 50.61 like the gun from Heat? (or rather, something that looks like one)

The new Mossberg Bullpup also looks good. While I liked the one with the extended magazine tube, I like this new one better, simply because the standard models without the extended tube seem to be the ones which appear in movies most often. -MT2008 22:52, 8 January 2009 (UTC)

Excellent, that 50.61 is perfect. Thanks again! -MT2008 03:24, 9 January 2009 (UTC)

Trapdoor Springfield

Thanks for uploading pics of the Trapdoor Springfield rifles, they complete a few of my pages better. I added your pictures to those pages as well.

I've been working on The Dirty Dozen, have you seen it? I have the guns down but I've only seen the movie twice and don't know all 12 guy's names. If you have, can you help me out with that? - Gunmaster45

RE: Above

I am sorry in advance for the language I am about to use but this douche Gunmaster45 completely erased the "Dirty Dozen" page I had ALREADY created. Not a single piece of the page I had created still exists. Admin or not where does this asshole get off destroying a page I worked on???

Help with Transformers 1911 pistol ID?

Hey, I was wondering if you could take a look at the M1911 being used by Captain William Lennox (Josh Duhamel) in my screenshots of Transformers and see if you could ID it? It appears to be a mostly standard M1911 pistol but has a Kimber-style hammer and slight beavertail to the grip safety. Any help you could provide would be greatly appreciated. Orca1 9904 08:00, 11 January 2009 (UTC)

Just took another look at the M1911 page and it almost looks like the Colt XSE, only the weapon in the film lacked the second set of cocking serrations at the front of the slide. What do you think? Orca1 9904 05:59, 14 January 2009 (UTC)

Re:KIN93

Not really. He has been warned before this, so being a bit frustrated is understandable. And yes, I agree that being released in theaters does not justify using bootlegs, and will certainly still be noticed by any studio police on the prowl. After all, if a movie hasn't been released on DVD yet, there's no way to get screenshots other than bootlegging. And that's why it's unacceptable. -MT2008 01:45, 13 January 2009 (UTC)

About the images on the Predator 2 page

Could i replace them?Oliveira 20:28, 14 January 2009 (UTC)

Screencaps

I've been trying to cut back on the amount but I have my specific way I make my pages. I don't just tell what guns are used. I tell you what guns are used, who uses them, goofs, and fun facts. It makes the page a little larger but I like to think of it as being thorough, more like an article then just a "page". Since we have pages for actors, guns, and films/TV, it is good to show you the info. Sometimes I just can't pass up good shots. If you notice on my Last Man Standing page, the shot is either good, or is telling information. I understand that some of my pages are cluttered, but I've been doing my best to keep them organized. My limit now is usually ten or less images, but I sometimes have to makd exceptions. You are free to remove screencaps I add if you find them to be to many on one of your pages. You are free to do whatever you want to your own pages, if I add something you find it not needed, you have the right to remove it. I took some of the Mini 14 shots off your Commando page for that reason. - Gunmaster45

I was looking at the Rambo (2008) page and saw some of the changes you made. As always, I was a little sad to see those images you removed go but it is your page and your right. While I understand the removal of the shot of the soldier sent airborne by the .50 caliber (I just thought it was worth noting how dumb "movie logic" can get, but it doesn't have a gun in it, so it is not needed), but why did you remove the shot of Diaz with his FN FAL Carbine? I thought it was a pretty clear shot.

I just added some shots to Flashpoint and soon I'm going to do Get Smart and a revamp on the Matrix series (the three films and that awful Animatrix) since I bought the four pack DVD - Gunmaster45

Thanks!

Thanks for your comments about my pictures from The Sting; it's always been one of my favorite movies (despite its use of suppressed revolvers!) Feel free to make the screencaps any size you feel appropriate, I appreciate your comments and interest! - Speakeasy804

A little help

I just started my Police Story 3: Supercop page, but I need some help IDing some of the guns. Can you give me a hand? Excalibur01 14:36, 18 January 2009 (UTC)

Question About Bond Actor Category

I was wondering, in the "James Bond Actor" category page, should we limit it to actors who've played James Bond himself, or should we allow 'supporting' actors such as Bond girls (ie, Halle Berry & Honor Blackman) and villians (such as Robert Carlyle & Gert Fröbe)? I'm proposing this to several admins and would like to get some feedback on this before making a decision. Orca1 9904 22:09, 19 January 2009 (UTC)

Screencap limit?

Hey, I was just looking at some of my own pages and seeing that I tend to really really overdo it with screencaps (which makes some pages take way too long to load). I was just wondering if you know what a good suggested amount might be for the same gun? Thanks - Speakeasy804

That sounds like a very good amount for each. I'll try and go through some of my pages (especially Dillinger (1973) and Bonnie and Clyde) and reduce some of the redundancy. I'll keep it in mind from now on. Thanks for getting back to me so soon! - Speakeasy804

Hi!

Sorry I haven't been on IMFDB in a few days. To answer your question: It's not so much that life is kicking me in the ass, it's mostly that I'm in Washington, DC right now without my laptop. Even though I didn't vote for Obama, I came here for his inauguration, mostly because my Mom is a big fan, and because my boss got us the tickets, and well...you know, I do try to do nice things for Mom, even if I don't like the guy she helped elect President. Plus, I got several days off from work, which is always nice.

I should be back tomorrow, and I'll catch up on everything I've missed for the past few days. -MT2008 01:16, 21 January 2009 (UTC)

Request

I really like how you edit those jacked pics and make them look so much better. So, I figured I'd ask...if you get time, do you want to edit this pic of a Gen 1 Glock 19 that we've been using on several pages?

File:Wviewpoint 0430.jpg

Glock 19 9mm

If you get around to it, cool, but I realize it might be a while. It could use some removal of white space and shadows, and any other touch-ups you can do. Thanks! -MT2008 00:58, 25 January 2009 (UTC)

Ah, alright, well, that's fine then. Just figured I'd ask because I thought I remembered you telling Orca that you didn't have a Gen 1 Glock 19 in stock at the time, and I wasn't sure if that had changed recently. And yes, DC was a whole lotta fun...until I had to go to the party where all the people from my firm were celebrating the inauguration. Try being the only Libertarian in a room full of mindless liberal douchebags and it's quite awkward. I loved how they were all clapping and cheering even when Obama was saying things that weren't really all that profound or moving. I don't think it matters how good or bad Obama turns out to be as President...this Stalin-esque cult of personality around the man is something I will never get used to. -MT2008 01:21, 25 January 2009 (UTC)

It looks WAY better. Only thing is, next time, please just upload a new version over the old one. Thanks for doing this. -MT2008 19:55, 25 January 2009 (UTC)

By the way, is there really a difference between the T3 AKMS pistol and the ones from Rambo and Pineapple Express? I keep comparing photos and I still can't see the difference in barrel length. The only thing I see is that the Rambo one may or may not have a smooth receiver cover (like the standard Type 56) instead of the AKM-style ribbed. And the True Lies gun is a different one entirely. -MT2008 21:03, 25 January 2009 (UTC)

Rambo (2008

Just to give you a heads up I changed the info on Rambo M2 Brownings. I talked to Kevin @ ISS about them and he told me they were M2. He was with the show in Thailand working on the 50's. As for the designation AN/M2 was used by the military to discribe the Browning Aircraft gun both 50cal and 30cal unitl 1944 it was changed in September 44 to M2 Aircraft. Thanks. - Phoenixent

Thanks

Thanks for the new 870, It looks amazing. Even the color of the stock and pump match the gun in the movie, excellent work. So are you working on the ghost ring version right now or still looking for the accessories? Either way, I'm sure it'll be worth the wait. Thanks again, and keep up the great work.--Alienqueen11 22:10, 28 January 2009 (UTC)

M1-C Garand

Beautiful M1-C, thanks for uploading it. - Gunmaster45

Browning M2

That is definately useable! It's great! I was going to ask that you replace the M2 pic but figured you had enough to do already. You might want to take a picture of it on a pintle mount though because that is the most commonly seen .50 in films. - Gunmaster45

I like your picture! If you can do the pintle mount, great, but right now, I'm just happy we have a picture of an M2 at all that we can call our own. -MT2008 20:11, 29 January 2009 (UTC)

Browning M2

Thanks for the M1 Garand info, that picture helped me alot, I now understand how the scope and gun work. As for the M2, That is definitely a usable picture, it's excellent! .50 cals are huge, and I would say that type of format is perfect for them. If you want my photo wishlist again, it is these besides the ghost ring 870:

Beretta 92FS Inox

Two Tone Beretta 92FS (If you're able to combine the parts)

Heckler & Koch Mark 23 ("SOCOM")

And if it's possible, can you obtain a U.S Military issue Beretta M9, I know it's very much the same as a Beretta 92FS, but I heard there were some slight differences, and it would go great with the M9A1 you uploaded before. But if you can't get ahold of it, it's okay. The 870 and the Beretta 92FS Inox are the main things I want. Thanks.--Alienqueen11 19:36, 29 January 2009 (UTC)

Nevermind the M9 actually, MT2008 is right. We don't need it.--Alienqueen11 20:14, 29 January 2009 (UTC)

Re: Help on Alex Reid

Looks like my Jedi Mind Powers are at work again. Creepy, eh?

Alex Reid uses several types of weapons in Ultimate Force. She uses a SIG-Sauer P226 in at least a couple of episodes. In the episode where the SAS goes against the IRA, she uses an MP5KA1 to shoot at the terrorists during the ambush, and later briefly has a Glock 17 (the same one you see being pointed at her) before the bad guy takes it away. In the season 1 finale, she is given a PPK, but never gets to fire it herself. In another episode where the SAS goes after a Christian cult, she has an MP5SD3. In the season 2 finale where Red Troop goes to South Ossetia, she uses an FN Minimi. Here are some pics from the Ultimate Force page:

File:Vlcsnap-77839.jpg

Caroline Walsh (Alex Reid) unloads a SIG P226 at French special forces in Episode 2.1, "Communication".

Error creating thumbnail: File missing

Captain Caroline Walsh (Alex Reid) firing an FN Minimi in Episode 2.6, "Dead Is Forever".

Only problem is, these don't really show her face that clearly, so you can't tell who she is. I'll see about getting others... -MT2008 20:23, 29 January 2009 (UTC)

I think I got one. Give me a sec to cap it. Season 1, and the episode was "Just a Target" Excalibur01 06:34, 30 January 2009 (UTC)

Also, just remembering, in season 1, forgot which episode, she is seen with a full length double barrel shotgun, but never fires it. Excalibur01 06:34, 30 January 2009 (UTC)

Here's the pic of her with her SIG

File:UFCWalsh.jpg

Wikipedia pirate?

Hi, I requested several images from you a while back, but there appears to be an editor on Wikipedia going by the name Josh Woolstenhulme who appears to be uploading some of your gun photos and claiming to be the author. Here are his uploads: http://en.wikipedia.org/wiki/Special:Contributions/Josh_Woolstenhulme

If this isn't you, just a heads up.

99.232.226.200 21:31, 29 January 2009 (UTC)

Thanks. He IS stealing images. A quick pass and I noticed these.

http://upload.wikimedia.org/wikipedia/en/5/51/Simonov-Russian-SKS45.jpg http://upload.wikimedia.org/wikipedia/en/1/10/M1_Garand.jpg http://upload.wikimedia.org/wikipedia/en/7/74/M1903Mark1.jpg http://upload.wikimedia.org/wikipedia/en/7/71/AKMRifle.jpg http://upload.wikimedia.org/wikipedia/en/2/27/SMLE.jpg

so how do I complain and get these down?

I'm not a Wikipedia member at present (I usually post anonymously), but it seems this user is already setting himself up to get your images removed. Note on the AKM image, it now says this:

This image or media does not have information on its copyright status. Unless the copyright status is provided, the image will be deleted after Friday, 6 February 2009. Please remove this template if a copyright license tag has been added.

But you should keep working with Koalorka to make sure your stuff isn't being taken, because I'm afraid I dunno what to do besides leave requests on a moderator's talk page. -MT2008 19:45, 30 January 2009 (UTC)

Yes, that was me that put up the warning tags. All violating images have now been removed and the pirate warned. Thanks again for the Ameli, you can find the article here. 99.232.226.200 16:46, 31 January 2009 (UTC)

My requests

I don't have much but here's a few I thought of:

MG42

MG34

Glock 18 with/without 33 round mag

I mentioned before how I'd really like a Winchester 1866 with the forearm and without it fro when they mimick Henry rifles in movies.

Any western guns are great, I'm one of the few who can apprieciate them (since about 90% of the western pages are mine)

We still need a Mossberg 500 with wood furniture for pages like Heat

Some more Desert Eagles. The images are all .50AEs, we need some .44s and .357 DEs. We also need a black model.

RPG-7 (still using that ugly picture taken off google)

M60 series machine guns

That's all I got for now. - Gunmaster45

Was the extra holding that M60 an extra or someone well known? By the way, I could never do your job. The idea of so many idiots handling and breaking my guns would drive me to insanity. - Gunmaster45

Good Luck

I would like to wish you good luck on your most recent business trip, and I hope you have a good time or try to, and thanks for notifying us about it. Also, sorry to put more requests on your list, but can you look around for these as well?:

Browning Automatic Rifle or B.A.R

Mossberg 500 with High Capacity Magazine tube

Mossberg 590 with Ghost ring sights (I think this is what the Remington 870 on the Hostage page really is, and I seen them in movies such as The Last Castle)

M1 and M1A1 Thompson

Thanks, and I wish you the best of luck on your trip.--Alienqueen11 02:20, 31 January 2009 (UTC)

Have fun! -MT2008 03:53, 31 January 2009 (UTC)

Revolvers

I have a question. I know auto pistols need to be milled and threaded to fire blanks but do revolvers need to be modified to fire reliably? I once had some acorn crimped .45 LC blanks which I put through a SAA. The primers backed out from a lack of recoil and the gun locked up. I tried putting it though a Colt M1917 and it hardly fired unless I angled it right. I've seen in movies how some of the firing pins are removed from the hammers (like the S&W 36 from Running Scared). If they do need to be modified, could you tell me how exactly? Thanks.

P.S. If we have any more things to add to your list, can we just add them directly or should w ask you first in discussion? - Gunmaster45

I also forgot to ask, what movie was the M60 used on? - Gunmaster45

Push

Have you seen the trailers for the new movie Push coming out soon? I'd screencap the hi-def trailer but my computer is too slow to do it right. If you're free, could you give it a look? I'd rather you made a page with HD trailer shots than some anonymous user making an empty page. - Gunmaster45

RE: Got a gift for you! ;) More coming

You are awesome! These guns are great! I'll be sure to add them to the page. I'm going to have to go back and snap a shot of Ace with an SAA (they didn't show him too clear but I think I can find one). I can't wait to see what else is coming. Thanks! - Gunmaster45

I'm glad to see you've gotten more famous guns, they look great. It's quite impressive how many guns you're uploading that are well known as used guns by the actors. Did you meet with some important people lately? Keep up the good work, the pics look great. - Gunmaster45

All I can say is...Oh, my, God. You have outdone yourself this time. This is one of the best updates you've given us yet. I don't even know how to begin thanking you. I can't even express how giddy with excitement I am that we have these pictures. -MT2008 01:37, 4 February 2009 (UTC)

Yep, I saw those too! Really awesome. More than awesome, actually. And the new Desert Eagles and the Mark 23 are also VERY highly appreciated, too. -MT2008

Desert Eagle

The Desert Eagles are great! We really needed a black model and you gave us all three! Thanks much. - Gunmaster45

H&K Mk 23 SOCOM

Outstanding work with the SOCOM pistols! How did you come across a REAL knight's arament suppressor? You've really outdone yourself this time! Keep up the good work. - Gunmaster45

Photos

Nice photos you got the other day from our friend. I did not mean to rub you the wrong way last week. We could work better together and put this behind us. - Phoenixent

Babylon .A.D/ SPAS 15

I don't think the gun under the M4 is a SPAS 15. The gun pictured has a full lengh forend and the reciver doesn't match. I have seached every where and can't figure out what the gun pictured is. But thanks for help. Gunner313

Welcome back

Welcome back from your trip, hope you enjoyed it, and thanks for the new goodies. I put your newest Smith & Wesson handgun pictures on most of the pages except the ones that had no screencaps or if I couldn't tell which kind of model it was, and I also put the movies guns you got on the S.W.A.T., Untouchables, and Pulp Fiction pages. Best regards.--Alienqueen11 21:59, 4 February 2009 (UTC)

RE: Thanks

Sorry about taking the honors away from you, those are amazing pictures though especially those guns from The Quick and The Dead. If you would like help replacing the pictures, let me know.--Alienqueen11 06:23, 8 February 2009 (UTC)

Thanks for the new pictures, how many armorers did you meet with? Also the Berettas from Die Hard and Lethal Weapon are nice, so they took it out of the case for you? It looks well worn. Also, about formatting, I noticed one or two users put
at the bottom of sections a few times to space out their pages, I previewed it on pages a few times, it seems to work, but you have do it a few times in a row. Not sure how effective it is, but I figured it's worth noting.--Alienqueen11 08:24, 8 February 2009 (UTC)

Two requests

Star Ultrastar, And a S&W 5906 w/ Adjustable sights Nice job on the Beretta 92 section, by the way ~ Revolver

Weapon Photos

Nice photos you just posted. I hope you do well getting your next gig. This SAG BS will put a damper on things. I will have some non-industry related work coming into my shop so it should not hurt that bad. If you need anything PM me on the forum and I will see what I can do. Thanks - Phoenixent

Re: Update

You have really outdone yourself this time, all these new images are amazing. It's cool that you had help from the armorer of True Romance, and that you got to photograph the Beretta from the Die Hard and Lethal weapon films, it makes me wonder why so many why so many actors and directors are so anti gun, especially when they worked around guns so much. Anyway, no one should mind if you replace their pictures, yours are superior to anything else on the site, and I have seen the XXX guns, and those are cool, thanks for finding out what the mystery M1911 on XXX 2 was. It's also cool that IMFDB now has it's own pictures of these unique guns. It was nice of those guys to help you, that was by far the most guns I have ever seen you upload. One thing is for certain, if people don't come here to see what guns were used in which movie, it'll most likely be to see your pictures.

No problem about the formatting, a user named Vinniebar used it when this site first started, hopefully it'll be the answer to our formatting problems. Anyway you did good with those Berettas, they came out great with what you had there, do the they still work good? Anyway I have to get to bed now. You can keep uploading gun pictures if you want, but you can take a break if you want, you derserve one. Thanks again.

P.S, sorry if it took me long to respond, I'm not the fastest typer.--Alienqueen11 09:06, 8 February 2009 (UTC)

The new stuff

Your updates just keep getting more and more incredible. Having actual movie guns was cool enough, but having specific guns from movies handled by stars is just beyond cool. The new Berettas and the Tokarevs are especially appreciated. I just don't even know how to thank you anymore, and words just ain't gonna cut it.

BUT...I must ask you a really quick question. You say that this Beretta was used in Die Hard:

Error creating thumbnail: File missing

Beretta 92F 9mm used by Bruce Willis in the film with extended mag release and slide release.

Only thing is, this gun clearly doesn't have the extended mag release and slide release, which is visible in this screencap from our movie page:

Error creating thumbnail: File missing

McClane with his Beretta 92F drawn while taking cover from incoming fire from both Hans and Karl.

My question is, isn't THIS the gun that Bruce Willis used in the first Die Hard:

Error creating thumbnail: File missing

Beretta 92FS - 9mm. This is the actual screen used Beretta carried and fired by Bruce Willis in the film.

...because this one actually DOES have an extended slide release and mag release. Also, LMO has a picture of this gun on their page for Die Hard (which isn't as good as yours) and it looks identical to this.

Furthermore, I doubt this gun (the one right above) was in Die Hard 2 or Die Hard with a Vengeance because I don't think either of the Berettas in that movie had the extended slide release. On the Die Hard with a Vengeance, I posted a picture of one of the Berettas which I took from LMO's site.

Anyway, point is, are you sure you didn't reverse the images? Thanks. -MT2008 18:20, 8 February 2009 (UTC)

Also, I could have sworn the Beretta Gibson used in the first Lethal Weapon had a gold Beretta logo on the grips. Did they replace it with the blacked-out one later on? Orca1 9904 18:45, 8 February 2009 (UTC)

Oh, crap...you know, I barely even grasped the scale of what you uploaded because you did so many. The Auto Ord 1911 from "Pulp Fiction", the S&W 629 and the 1911 from "XXX 2", the P7 from "True Romance"...excuse me while I go pee myself with excitement. -MT2008 18:51, 8 February 2009 (UTC)

And not only do we have a Jericho 941 that's stainless, but it's the same gun used in Live Free or Die Hard? (faints) -MT2008 19:30, 8 February 2009 (UTC)

The Berettas

First of all, Cinema Weaponry has a display case for some of their famous movie guns? That's really awesome...do you other pictures of it? What else is in it?

Anyway, like I said, I'm pretty sure you just reversed the two Beretta images. THIS one is from Die Hard:

Error creating thumbnail: File missing

Beretta 92FS - 9mm. This is the actual screen used Beretta carried and fired by Bruce Willis in the film.

Again, if you look at the picture of Willis with the 92F from "Die Hard", it looks identical. Also, wasn't there more than one of them? I've always understood that you guys are in the habit of having at least one or two back-up weapons for each "hero gun" use? Did Mike Papac configure multiple Berettas in the same way as the one used by Bruce Willis in the first "Die Hard"? -MT2008 20:25, 8 February 2009 (UTC)

OK, I'm looking at your picture of the display case. If you want my opinion, it looks like the 92F in the center of the picture (next to the "Enemy of the State" 1911) actually was used in "Die Hard 2" and "Demolition Man". You can see that it hasn't been modified for Bruce Willis (no left-hand mag release, probably because Sylvester Stallone used it later, and he's no lefty). However, the next Beretta over is definitely the one from the first "Die Hard" - it does have the left-handed, extended mag release. However, you probably just can't see the label for the gun because it's out of the picture.

Do you think that might explain things? We should ask Steve about this, as I'm sure he knows well. -MT2008 20:30, 8 February 2009 (UTC)

But I forget...didn't Syd Stembridge basically take all of his remaining assets to Cinema Weaponry? I've been under the impression that Stembridge and CW essentially merged with each other after Stembridge closed down in '99. So aren't the guns that Syd kept now in Mike's hands?

And yes, I imagine Mike must have a lot of cool stuff to photograph. One other thing you should ask about...remember the H&K G11 from Demolition Man? If you can at least get the story on where that gun came from, that would be awesome. I've always wondered...did they build it themselves?

ALOT of them in films are still those HK94 conversions, but now we can't tell visually if they are or not.

True, but that just means they're identical to almost every single other transferable MP5 within the chain of commerce, which were also converted from HK94s. I forgot...was it La France that did most of the conversions of HK94s for Stembridge, Ellis, etc.? Anyway, it's good that you got the picture of the one that you have. Those things may be obvious conversions, but they're still an important part of movie gun history! -MT2008 21:38, 8 February 2009 (UTC)

I figured Syd was still in business even though he doesn't seem to get many armorer credits these days - if you watch A Man Apart, for instance, it says, "Weapons provided by Stembridge & Cinema Weaponry" in the credits. But I've been confused about what weapons he retained, what LMO sold, what CW received or what came under their umbrella, etc. Thanks for clearing that up.

So as far as the G11 goes, are you saying that the one in Demolition Man was actually a real G11 and not something that was built specially for the film? I figured it was built around something else, sort of like the way that "XXX 2" features G36Ks mocked up to look like XM8s (and I think Steve may have had a hand in that film as well). As far as getting a picture, don't worry, I won't pressure you. I realize how hard it must be. I was just curious to know if the gun in the movie was the real deal or not, because I couldn't imagine HK would ever trust some moronic actor with one of their rare prototype weapons (no offense to Wesley Snipes). -MT2008 02:37, 9 February 2009 (UTC)

Confusion + Overseas visit

I think I'm about to make you a whole lot more confused...

Mike recalls that he didn't install the extended mag release button and slide release until the second movie

If that's what Mike recalls, then it doesn't seem to match the evidence. Here is a screencap from the first Die Hard showing the Beretta:

File:Vlcsnap-62528.jpg

So again, this is the first movie that this image came from. If you look closely, you can see that McClane's (Willis') Beretta does have the extended slide release. Again, compare to the picture you took:

Error creating thumbnail: File missing

So Mike's memory must be failing him on this, with all due respect. It looks like he did put on the extended slide release (and mag release) for the first movie. I don't know about the Lethal Weapon movies (I don't have those on DVD), but the 92F from Die Hard 1 is a gun that has an extended slide release.

Also, did Mike do any work on Die Hard With a Vengeance? I've always been under the impression that because that movie was filmed in New York, Weapons Specialists, Inc. provided the guns for that film. Rick Washburn is credited on IMDB as the armorer on Die Hard With a Vengeance (though it looks like Dave Fencl also did some work on the film). -MT2008 20:45, 10 February 2009 (UTC)

re:

I MAY have an opportunity to go overseas (France) and I will try to photograph some of Christophe Maratier's guns (Leon/Ronin/LaFemme Nikita/District B13/Taken/etc) I would like to also go picture taking in Britain at Bapty's or Sascha Robey's collection, but who knows? I don't have a connection/introduction yet with those guys. And with all the retarded gun restrictions going on over there......

That is pretty wild! Unfortunately, Bapty auctioned off a whole bunch of the James Bond movie guns (including several of the original Walthers, plus the OICW replica from Die Another Day), back in 2006, before the recent ban on "realistic imitation replicas" took place (they were all deactivated prior to the auction). Still, it would be really cool to see some of the stuff they still have. You would probably be able to get them to let you in, though. Dan Shea went to Bapty's back in 2003 (I think) and they let him photograph a lot of their guns (which appear on LMO's site), so if you told them who you were, you could probably get in. Have fun! -MT2008 20:48, 10 February 2009 (UTC)

Yeah, but WHO is the better photographer? ;)

Well, obviously...hehe. :-) The coolest thing is how you got a lot of the same guns as his site, but yours are 100x the quality. Speaking of which, have you ever considered professional gun photography for a living? Or do you already do it? Your pictures are the kind of thing that gun rags and books would kill for.

I was thinking of doing an actual table top book with the pics (including a bunch of other angles that I did not upload)

What about a book showing off specific "hero guns" from movies? Have any of you (the armorers) talked about that in the past? Of course, I guess the great thing about IMFDB is that you guys are free to use it for precisely this purpose, except that anyone can access it for free.

Either that or I'll say "MT2008 says you're full of SHIT!" heheheh. Those were done 23 years ago and we're all doing this from recollection.

Ugh, I dunno if I could stomach the idea of correcting Mike on his own work, being as I'm not an armorer. But I do realize that it's unreasonable to expect him to know all this stuff from memory. I have trouble remembering details about specific guns I shot as recently as 5 years ago. 23 years is a long time to keep details in your head, for any human being.

As far as the (nearly) blank pages go...screw 'em. I've deleted several already. Also, one user made a page for The War Briefing. I'm not sure it fits with the scope of the site. What do you think? -MT2008 05:02, 11 February 2009 (UTC)

re:Asshat

It's just some dude who's upset because I gave him a temporary suspension for fucking up the Live Free or Die Hard page with inaccurate info when he didn't even have the courtesy to ask before editing. Maybe I over-reacted a little, being that I did most of the screencapping and other work on that page, but the sheer audacity of his rudeness just pissed me off so much that I figured he deserved a time-out.

Don't worry, I wasn't fooled for even a second when I saw the "Warning" on my talk page (you can see my responses to him here). And yes, I could actually report him for impersonating an FBI agent and they might complain. But, this loser is too pathetic to even bother. Besides, I have the flu right now, so I don't feel like it anyway. -MT2008 20:27, 11 February 2009 (UTC)

Arachnid

OK, it's really interesting you made a page for this movie...I watched it on Sci-Fi not too long ago, but couldn't remember the title! And even though I'm an Ultimate Force fan, I completely failed to recognize Alex Reid in the movie. Weird...

As far as the guns in the movie, I may be wrong, but I remember the AR-15 carbine (the long-barreled one) being a Colt Sporter-1. Or at least, I think the upper was from a Sporter-1, because that looks to me like a 16" barrel. I can't remember - was the gun ever fired on auto? I remember the Model 733 was, but I remember the other AR only being fired on semi. In which case, I suspect it's most likely a factory civilian Sporter-1.

Also, I think Chris Potter's MAC (the one which magically becomes an Uzi) is an RPB clone or something else that's smaller. Unless Chris Potter is a huge guy with huge hands (and he doesn't seem that way in any of the other stuff I've seen him in where he handles guns), the receiver on the MAC looks a bit too small for it to be an original MAC-10. -MT2008 20:39, 12 February 2009 (UTC)

No worries! I would have been really upset myself. My first week here, I remember editing a page while another user made a minor edit simultaneously, and I was really pissed off too because I lost all my edits which I hadn't backed up, which was nearly an hour of work down the drain. Nowadays, I'm in the habit of copying anything I write into a Word file before submitting in case that happens.

Anyway, back to the movie...I'm not sure if Chris Potter has such huge hands or not. Not too long ago, I was watching episodes of Kung Fu: The Legend Continues on YouTube, which he starred in. His sidearm in that show was a Beretta 92FS Inox (which had a habit of turning into a Taurus PT92 in some scenes), and it didn't seem any bigger in his hands than mine, and I don't have big hands (just long fingers). I haven't compared a MAC-10 to an Uzi in size, so I dunno what the difference is.

Oh, yeah, and I love how he fires his MAC/Uzi sideways, "gangsta style". He used to do that with his Beretta in "Kung Fu" as well! -MT2008 00:06, 13 February 2009 (UTC)

Browning A5

Do you by any chance have any Browning A5 shotguns in your armory, as well as a Remington Model 11 copy, since I've noticed a few pages featuring them (like Speakeasy804's Thunderball page).

And you never got back to me on my qeustion about blank converting revolvers. It's a little further up your discussion page. - Gunmaster45

The Rundown

I've had The Rundown screencapped for some time now (hadn't had time to upload) but would you mind if I replaced some of your shots with mine (they are larger resolution), but if you don't want me to, I could always delete my caps, but it took me a while to save them. I've had it on my list for some time now, it would really make me happy if I could upload mine. Get back to me on this. - Gunmaster45

I realized this, so I only replaced one shot of the Remington 870 because it shows just a little bit more. You're shots are still on the page. - Gunmaster45

Thanks, I felt (I guess the word is self-conceous) since I knew I was uploading more screencaps than you would have, but as you see, I add comments on the crazy movie logic and other fun facts to fill out stuff (I always have a plan when I save screencaps, so I know when I plan to label these facts early, hence I sometimes have a heavy screencap load). I try to always catch EVERY gun in a movie, so I never use scene skip and rarely fast forward. When I do fast forward, I have a strange sixth sense that allows me to see guns that are only seen briefly on even normal speed. Anyway, I'll be uploading a movie called Legends of the Fall tommorow, I'm working on it now. I think it is a perfect gun movie because it covers the early 1900s, so we see old west guns, WWI guns, and prohibition gangster guns. It's great. Incredible film too, I recommend it. - Gunmaster45

Revolvers again

Copied from above:

I have a question. I know auto pistols need to be milled and threaded to fire blanks but do revolvers need to be modified to fire reliably? I once had some acorn crimped .45 LC blanks which I put through a SAA. The primers backed out from a lack of recoil and the gun locked up. I tried putting it though a Colt M1917 and it hardly fired unless I angled it right. I've seen in movies how some of the firing pins are removed from the hammers (like the S&W 36 from Running Scared). If they do need to be modified, could you tell me how exactly? Thanks. - Gunmaster45

Thanks for clearing up the SKS, that was the only model I was aware of (not an SKS pro, only know what I've seen or held at shows) - Gunmaster45

I guess I just had crappy blanks. I can't remember the brand but they were written in french or italian or something. They were acorn blanks, not those longer movie blanks. Plenty loud though. - Gunmaster45

Shoot 'Em Up

I usually use my desktop computer for screencapping and it keeps the master images at a relatively simple size so I don't need to resize them. But I screencapped Shoot 'Em Up on my sister's HP Pavilian DV-6000 laptop because my screencapper on the desktop didn't except SEU's format. Her computer is HIGH-DEF and the images were gigantic, even after I resized them. I thought they were small enough after resizing but they were still pretty big. They certainly look nice though. You can tell based on the number of screencaps that I wasn't up to re-resizing all the images because they were a tad over sized. Next time I use her laptop to screencap (get ready for a much better documentation of the Matrix films), I'll be sure to resize them correctly. - Gunmaster45

Smith and Wesson 1006

Hey, MPM, could you get me a pic of a Smith and Wesson 1006? That'd be awesome, thanks. from ProtoAuthor.

Also, from me again, how about making an UziMac10, like in Dogs of War?

Those guns don't exist any more. Once regular Uzis became more prevalent (including the influx of semi automatic Uzi Model A and Model B carbines that were then converted into full auto guns in the 1980s) the MAC 10s were converted back to MAC-10s. And good riddance in my book. ;) MoviePropMaster2008 05:59, 18 February 2009 (UTC)

Dang. Well, how about the 1006?

M1911 Question

I was wondering, would it be possible to take the hammer and grip safety from a Colt XSE and put them on a standard M1911A1? I was thinking this might be what was done to create Josh Duhamel's 1911 in Transformers. Any input you have on this would be greatly appreciated. Orca1 9904 04:15, 15 February 2009 (UTC)

More Requests

I have a couple more requests

The Custom Mossberg 590 from Rambo (2008) and Transformers

Beretta 92FS fitted with Silencier

M40 and M40A3 Sniper Rifles

Barrett M82A1

Thanks

From 76..219.156.200

Badlands image sizes

Hey, a user converted all the 500px images I used on Badlands to 300px, but I was wondering if that was too small? I would change it back to my original 500px (or at least 400px) but I don't want to rub anyone the wrong way by undoing what was done (if they had good reason). Also, good call on the 03A3 rifle used, I had completely misidentified it! - Speakeasy804

Thanks for clearing that up, I appreciate it. I didn't want to cause any trouble but since you'd seen the page for sure I figured you'd know best how to handle it. - Speakeasy804

Colt 1903 Pocket Hammer

Hi MPM. The Colt 1903 Pocket Hammer is a completely different weapon compared to the Colt 1903 Pocket Hammerless. The Colt 1903 Pocket Hammer is a shorter version of the Colt 1902 Military and is chambered in 38 ACP. You don't see them that much any more since the 1911 came out. We did send one out on Public Enemies but do not know if Harry used it. -Phoenixent

No problem but someone at Colt was not think when they named their models. I can see the salesman trying to explain it and the customer rolling their eyes and saying what are you talking about. They had some neat weapons in those early movies. - Phoenixent

Ever used one of these?

While I was screencapping 3:10 to Yuma (2007) (I'll be uploading it very soon), I saw in the special features that they use this special gun that fires balls of dust or spark so you don't have to set up squibs anywhere to imitate bullet impact. It looked pretty cool and I was wondering if you were familiar with these. - Gunmaster45

Some shots:

File:SquibGun-1.jpg

File:SquibGun-2.jpg

File:SquibGun-3.jpg

Mythbusters had something remotely similar on an episode a while back. I say remotely, because while they created the same mini-bombs (for lack of a better term), they hand-launched them at their door instead of shooting them. --Clutch 07:49, 17 February 2009 (UTC)

Watermarked Image

Since people have been using your images without permission, I made one of your pics with a water mark. What do you think? If you like, I'll be more than happy to add it to all your images so no one steals them.

Error creating thumbnail: File missing

Colt MK IV Series 70 with IMFDB watermark.

All I did was Hardlight the logo to remove the back color and faded it so it was just the logo alone. It's really easy. Get back to me. - Gunmaster45

For now do you mind if I just warn of spoilers at the top of the page? Later I'll decide what I can get rid of (if I do). If that guy on the Rambo page is a jerk, by all means remove his images, I personally don't know him so I couldn't have known that.

Don't forget to tell me what you think of the watermark. If it is too big, I can make it smaller. Whatever you want. - Gunmaster45

Re: Saturday Shoot --- more pics coming --- just a heads up

Thanks for the heads up, and good luck with the shoot. It sounds cool that you're going to photograph more great guns, I can't wait to see the McMillan TAC-50 and M249 , and anything else you have, you never dissapoint. If you get more western guns, that will be great, those guns look amazing and GM45 will be thrilled. It's cool that Imfdb will have pictures that no one else has or will have. Anyway, good luck with your shoot, don't work too hard. Also, can you try to get more cool Beretta handguns like the ones you uploaded last time? sorry if I'm bugging you with Berettas alot, I'm just really anxious to see you upload a Beretta 92FS Inox, it's one of the pictures I want most, that's all. Once again, good luck. Also did you tell any other armorers about Imfdb?--Alienqueen11 05:05, 19 February 2009 (UTC)

Hey, sorry I didn't respond earlier, but I have a burning request and I'm hoping you get this message before you go to CW again.

You know those weird AKMSU clones (in 7.62x39mm) that have AKS-74U-style folding stocks? They've appeared in a zillion movies, and I know they must be the same guns being reused a lot. I think they're just full-size AK variants (Type 56s or Maadis, maybe) that have been converted with Krinkov parts kits. I have no idea whose inventory they're in, but I've seen them in a lot of movies that Mike Papac and other CW armorers worked on, which leads me to guess that CW must have at least a couple of them in inventory (unless they sub-rented from a different armory).

Here is what I'm talking about:

Error creating thumbnail: File missing

XXX

Error creating thumbnail: File missing

Bad Boys II

Error creating thumbnail: File missing

A Man Apart

Error creating thumbnail: File missing

Tropic Thunder

They've also appeared in movies like Three Kings, Crank, The Kingdom, etc. If you were to take a picture of one of these guns, I think it would probably become our standard AKMSU photo, because probably 90% of the AKMSU-type guns I've seen in movies seem to be these same guns. If you can get one on short notice, great. If not, no worries. But have fun! -MT2008 04:06, 21 February 2009 (UTC)

Titles starting with "the"

Personally I've always hated the format of putting "The" at the end, despite it being considered "prop format" and personally I like the titles the way they are. If it is absolutely necessary to make this change, go ahead, but I don't like it. I think titles look fine the way the are "MoviePropMaster2008, User:".

And for the people who make fun of us in chatrooms, FUCK EM! People make diggs at us all the time, but the ten or so admins. on the site work hard and productive and are constantly combating 1000s of anonymous users daily, which is more than most can say. We do what we do right and anyone who mocks our work is a dumbass. - Gunmaster45

Getting tired of pictures? Every time you upload more guns, I feel like I'm getting presents, because I love seeing awesome new pictures of guns, especially movie guns. I almost peed myself with excitement when you uploaded all those screen-used weapons (like the P220 from "Live Free or Die Hard") on your last update.

The titles thing may be able to be fixed as well, without actually doing any redirects. There may be a way to sort titles so that the word "The" is ignored. I know that on my iPod, bands that have the word "The" before them are grouped by the next word in their names on my "Artists" list. It can't be that hard to find a command which sorts them differently. I'll see if I can find it.

And I share GM's sentiments on the people's who talk shit about us. They're just lames. Who cares what they think? If they were better than us, they'd actually make their own sites that are as thorough and informative as ours. Besides, I think IMFDB has already been influential in a lot of ways. I already see people on other gun boards distinguish now between a basic "AK-47" and a Norinco Type 56 look-a-like, which seems to be a trend we helped start, now that we've told people what to look for. For every negative comment I read about IMFDB, I see 10x as many people who love our site. Besides, how else do you explain the ridiculous number of views we've had in the last year? (nearly 3x as many in 2008 as 2007, the first year of operations) The numbers don't lie. -MT2008 20:06, 23 February 2009 (UTC)

Nah, dude, I don't disagree with you that it's annoying, what I'm saying is that there may be a way to fix it besides doing re-directs (which is going to take ages if you want to do it). You may be able to fix the page code so that the listing ignores the word "The" if it comes at the beginning of a title. That way, a movie like "The Dark Knight" would be grouped under "D" even if it was listed as "The Dark Knight" instead of "Dark Knight, The". -MT2008 20:55, 23 February 2009 (UTC)

re: AK issues

No, I don't hate you...actually, I've had the same thought myself for a while. The AK-47 page is getting too long and now includes variants it wasn't really meant to include. However, my idea for the solution is a bit different - that is, I'm not so sure we need to give the guns their own pages based on country of origin.

Broadly speaking, I think the AK-47 page should be limited to AK variants that are 7.62x39mm. You and I both know that the 7.62x39mm AKs which appear in movies and TV shows are the same types that used to be imported to the U.S. in the 1980s as civilian sporters. What that means is that the list is actually pretty limited - you've got the Egyptian Maadis, the Chinese Type 56s, the Hungarian SA-85Ms, and the Yugo M70s, and that's pretty much it. Of course, we've also seen the Romanian AIMS in a couple of movies (like "44 Minutes"), so maybe that one, too. So we can still classify the 7.62x39mm AKs by country, but on the SAME page instead of separate pages. You've told me yourself that armorers mostly stick to the old 1980s-vintage AKs and don't ever buy any of the newer guns (like the crappy Romaks and the Century Arms POSs), so doesn't that make our job pretty simple? We don't necessarily have to look for the more obscure derivatives that will only (at best) show up in movies filmed in countries where those guns were manufactured.

Besides grouping the 7.62x39mm AKs by their country of origin, I propose we also do the following:

-Put the Norinco Type 84 on the AK-74 page instead: The logic being, the Type 84 often stands in for the AK-74 in American and Canadian movies/TV shows ("Stargate: SG1" being a good example), so why not put it on a page with the gun it's meant to imitate?
-Move ALL AK-100 variants to their own page Even though they're basically modest updates of the classic AK-47 design, they're still different enough by name that I think they need their own page.
-Keep any AK derivatives that are significantly different on their pages What this means is that something like the AEK-971 should not be on the AK-47 page. And likewise, the Galil and Valmet (which already have their own pages) need to be kept there.
-Refuse to allow any foreign-made derivatives that don't appear in at least a few movies

How do you think that sounds? Maybe my defensive reflex is a bit strong on this, but I do really want to keep weapons that are basically identifiable as AK-47s and AKMs on one page. -MT2008 21:49, 23 February 2009 (UTC)

Question: Hey, MPM, how do movie effects people do RPG fire? Is it all CG, do they launch a dummy tip and edit it out, or what?

Re: Titles

I knew somebody would start changing the titles like that eventually, a few users complained about it, and a website even noted to look for titles beginning with The in the T section. The redirects you did worked out great, I think the movies with The in their titles will be easier to find that way, good work.--Alienqueen11 02:37, 26 February 2009 (UTC)

I agree, that makes things much easier! Should we also do the same with titles beginning with "A" or "An"? - Speakeasy804

Mr & Mrs Smith

I just finished The Boondock Saints and am in a pause between movies, were you planning to do this one or can I (I noticed you added shots)? It's been at the bottom of my pile for a while and it wouldn't hurt to start digging from the bottom now. If you have stuff saved, you can of course do it, but if not let me know if I can. Thanks. Great gun pics you've uploaded, we've needed a G36 for a while and the StG 44 is excellent. Superb work. - Gunmaster45

I did the Matrix on my sister's laptop, which puts out some really big pics. I sent them to my desktop and uploaded them on the site but didn't have time to resize them. They look fuzzy? I thought they looked great. I'll be doing the other Matrix movies on the laptop too, but I'll try to resize those shots first. I'm super pissed right now because I screencapped Mr. & Mrs. Smith and 50 of the screencaps didn't save. So now I have to go back and grab the shots, many of which are from gun heavy scenes. So I had planned to upload the caps by tommorow but my crappy as computer has other plans. BTW, I only use my sister's laptop when the DVD doesn't have the right format and won't play on my screencapper (a rarity, but it happens), so I don't use it too often. It's her computer so I obviously can't bogart it for my own means alone. - Gunmaster45

Your images look a lot better, but didn't you buy this special machine that screencaps VHS and DVDs? I'd assume that would put out better images than any simple DVD player like mine. If I had put more time into it, I could have brightened the pictures to look better (I do that more commonly when adding caps to one of your pages, because my caps look like crap next to yours if I don't edit them). Compared to my regular desktop images, you can see why I would find the laptop ones more appealing. You'll see when I upload Mr. & Mrs. Smith that I brightened the pics. My personal favorite screencap from the Matrix is the Desert Eagle cycling blanks, it just looks cool. - Gunmaster45

BTW, how come your images are so small? Usually when I upload images, they are just a little bigger than the sample picture with a full resolution preview. Yours have no higher resolution. Do you resize them to this point to save space or does your screencapper just produce small pics? - Gunmaster45

Re:Admins

I had figured he had had quite a probabtion period, but the one with power makes the decisions, not me. It was just a suggestion. - Gunmaster45

re: Congratulations!

Thanks! It's an honor to be a part of such a talented group. And I certainly understand, no need taking a risk when it's not necessary! While we're on the subject of controlling some of the stuff anonymous users add, I recall seeing a section about spoilers on the forums. I noticed today that someone had changed some of the words on my page for Godfather Part III, The to include some spoilers about the action happening (such as main characters getting killed, etc.) I realize this user was probably trying to help others specifically note when the gun was used, but that's what the screencaps are for. Would it be rude to rollback some of this user's suggestions to the previous format (which was more vague about deaths and killings in the film) or were they correct in adding this information? - Speakeasy804

re: Spoilers

Absolutely, that helped a ton! There are also a few in the Scarface page which, in my opinion, needs some revamping (especially since its one of our most popular pages). I'm thinking of capping it sometime soon when I have about four hours to spare, so hopefully it'll look very cleaned up relatively soon. - Speakeasy804

Mr. & Mrs. Smith pistols

I had them IDed as a Browning Buckmark Camper with a suppressor and a Ruger Mk III with a suppressor. Your caps are a tad clearer than mine, and now I'm even more sure I was right. (I'll likely use your caps instead of mine since they show the guns better)

As for the big room full of pistols, that is awesome. I can just image that when you open the door, blinding light shines through and a choir sings. I could spends hours upon hours in there.

BTW, the Beretta 93R pic looks great.

I'm almost done working on M&MS, it's a big movie and has been taking me a long time to finish. I've also brightened my caps so they look nice. - Gunmaster45

Gun Room Pic

Just saw the pic you posted of the Stembridge handgun room, and to quote James Earl Jones in The Hunt for Red October: "Mother of god..." Orca1 9904 23:04, 28 February 2009 (UTC)

Yeah, I love when you post the pictures of vaults/armories and such. Thanks for sharing those with us. Also, the new gun pics lately (the G36, Sturmgewehr, Beretta 93R, etc.) are much appreciated! Sorry I haven't been around as much lately; I have kind of a lot going on right now. -MT2008 02:59, 1 March 2009 (UTC)

RE: You might get a kick out of this

Wow, all I can say is Handgun Heaven! That collection truly is amazing, it has everything from Flintlocks to Semi-Automatics, I enjoy it when you take pictures of vaults and museum cases, they're really cool. Btw, the G36 rifles, the Beretta 93R, and the other photos you uploaded this past week are amazing, thank you for uploading.--Alienqueen11 03:48, 1 March 2009 (UTC)

Who supplied armorers CornerShot's

I been to every gun selling site and read every youtube video and could not ever find a CornerShot on auction. Probably because CNN said this weapon system will onfortunately not be sold to civilians. Were these weapons systems real or replicas if they were real how could armorer's get them when they originated from IRAQ?Btracy1993 22:21, 1 March 2009 (UTC)

gun room picture

They have an incredibly impressive collection there! That seems like one of those places that once you enter, you'd never want to leave! - Speakeasy804

SP89 used in The Rock

Hi, I would like to know more about the H&K SP89 used in The Rock (1996).

Was it actually, based on a H&K SP-89? or just a H&K MP5k plus a SP89 type front grip?

Also,i would like to know What's the trigger set of it? 0-1? S-E-F? or with Navy type?

Would you mind to post a photo of it?

Thx a lot~

Friendsever

Proper Quote

That was my bad, I could have sworn he said "Kids." Thanks for clearing that up and going through the effort of screencapping it with subtitles. I'm working on the Glocks now, then I won't have much more to add. - Gunmaster45

Reply

I'd probably stick my hand in the cubby with the MP5K-PDWs or the one with the sawed off/pistol grip shotguns below it to the left.

As for the "Colt 25", it is indeed a Colt 1908 Pocket chambered in .25 ACP, but most newcomers (and the person who made the page) know the cheap airsoft gun's name, which is the "Colt 25". - Gunmaster45

I was reading the Dawn of the Dead page, and I agree that the M16 they used looks more real than an Armscor. I own an Armscor M1600, it hits almost dead-on at 80yards but the pistol grip cracked so I don't use it much anymore. It hardly looks like an M16 at all. - Gunmaster45

How do I get my own room like that? -MT2008 01:34, 5 March 2009 (UTC)

Re: Imagine if you will.......

Wow, how big is Cinema Armory? I would look in the one that the green Beretta looking handgun in it. What is that green handgun anyway? That is a very cool picture btw.--Alienqueen11 01:27, 5 March 2009 (UTC)

Sigma SW9F

Thanks so much for that one! It's cool that we now have a standard black Sigma as well as the grey one. -MT2008 02:27, 5 March 2009 (UTC)

Re: Colt Mustang

I don't know. I had originally changed the Mustang because it had its own page and added it to the 1911. Basically it is still a Compact 1911 variant in .380 ACP (even refered to as Colt Government Model .380 by some and derived from such), but then again they make the Imbel M973 in 9mm and the Imbel MD1 in .38 Super Auto and both of them are fit for the 1911 page and based on the 1911 model. So my vote is no. - Gunmaster45

Re: Chamelot Delvigne Model 1873

The Chamelot Delvigne Model 1873 was issued in the white only they were never blued by the French. Strange to us that someone would issue a bare metal weapon any finishing or caliber mods were done by gunsmith here in the states. We had ten of them at Ellis and they were beautiful in the white. - Phoenixent

Re: Die Hard 2 "MP5s"

I don't think we can call the MP5A3s in Die Hard 2 "fake" MP5A3s because if you look closely, they don't seem to be partial conversions. On Stewart's MP5, you can see that it has a barrel with three attachment lugs, and the lower receiver has a pushpin (for swapping out different types) and a flipper magazine release. The partially-converted HK94s wouldn't have any of that stuff.

The MP5 handled by McClane (the one with the scope) may or may not be an HK94 partial conversion; I will have to check my DVD to be sure. But for now, I'm just going to call them MP5A3s because unless the gun is a partial HK94 conversion, we shouldn't call it a "fake" MP5 (even though we both know that 99% of transferable MP5s in the U.S. were actually converted from HK94s). -MT2008 18:53, 10 March 2009 (UTC)

Oh, I don't disagree with you that we should separate the HK94s from the MP5 if they are partial conversions. I've been trying to do that more and more often myself (see my Air Force One page, for instance). But the only thing I'm saying is, the Die Hard 2 MP5s are not partial conversions. Therefore, we can't really call them "fake". I think your eye just slipped. The ones in the movie are the full conversions which are visually indistinguishable from standard MP5A3s. -MT2008 19:04, 10 March 2009 (UTC)

Just checked my DVD. The scoped MP5A3 used by McClane is also a full conversion (it has an SEF lower and barrel lugs, which are visible when he pulls it out of the snow, takes out the mag, and realizes it's loaded with blanks). But it's all good, since we're on the same page now, as you said. ;)

I do appreciate the new pics! The AKMS and SL8 are quite nice, but the main one I was happy about was the S&W Sigma SW9F you gave me for my American Dragons page. Even though the Sigma doesn't appear in too many movies, it's really great we have one those now! Thanks again for all your hard work! As far as new users making too many gun pages...screw 'em. I mentioned my stance on this in that topic on the forum. Check it out.

Oh, yeah, and did you see that we were able to use your Daewoo DP51/K5 picture on the page for the game Combat Arms? -MT2008 19:32, 10 March 2009 (UTC)

Smith & Wesson Model 60 Hammerless

I was wondering, did you ever upload a picture of a Smith & Wesson Model 60 with a shaved hammer? I could have sworn we had a pic of such a gun here but when I went looking for it for the CSI: NY page I couldn't find one. Any help you could provide on this would be greatly appreciated. Orca1 9904 21:36, 10 March 2009 (UTC)

Re: The Beast of War Screenshots

I love the new screenshots, way better than the crappy Youtube stills I had up. Thanks a lot for screencapping this page for me. One note though; the tank used in the film is actually a Ti-67; a T55 that was modified by the Israeli's , most notably having the main gun upgraded from the original 100mm D-10T to a western-built 105mm L7 gun (the same kind used in the American M60 Patton and the earliest version of the M1 Abrams). Thanks again for the new screencaps, looking forward to seeing the rest of them. Orca1 9904 06:21, 12 March 2009 (UTC)

Thanks so much

Thank you so much for the 870, it looks amazing! I'm wondering the same thing, maybe he wanted to mock the 870 up to look like a Mossberg 590 with Ghost ring sights. But we got to admit, it sure does look badass, thanks again for the shotgun. if you need anything, just ask.--Alienqueen11 19:49, 12 March 2009 (UTC)

Re: Thanks for the Beast updates

I saw this film several times on TV a few years back, but I haven't been able to catch more than Youtube clips (where the previous low-res screenshots came from) lately. Some of the info came from those clips, while the rest came from memory and research on IMDB and Wikipedia. As for the screenshot captions, I don't mind at all, makes my job easier. I remember the film also has a firearm-related Rudyard Kipling quote at the beginning. Orca1 9904 23:14, 12 March 2009 (UTC)

Re: Dawn of the Dead Shotgun

If anyone deserves thanks it's you, but you're welcome. Also, since we're talking about shotguns, do you think you could get an old wood stock set on a Mossberg 590 for the Dead Presidents page? ~Yournamhere (I forgot my name, silly me.)

Re: Dawn of the Dead Shotgun

Thanks again, it looks even more menacing now, a true zombie killer. One question, did you have to do something specific to the shotgun to get the sights on? such as drilling holes?. Anyway, thanks again for the shotgun, it was well worth the wait.--Alienqueen11 05:30, 13 March 2009 (UTC)

Omega Man pictures

Hey great work on the OM page. I don't have the ability to capture stills from a DVD with my PC (I don't think I do) so way to go. Jcordell

Yep I'm a fan of Omega Man.

I'm forty-one and I remember going to a drive in with my parents back in the summer of 73 and watching Omega Man. It was the second feature, but dad says that I stayed awake for the entire movie. Pretty impressive for a five year old.

I own a copy of I Am Legend, but I prefer OM. Own both actually.

The only guns I own from the movie are a 1911A1 and a 1903A3.Whoops sorry I do own an M-1 carbine as well. I own several S&W revolvers , but unfortunately they never make an appearance in the movie. And I belong to a couple Omega Man websites. For those who like the movie.

I don't own any selective fire weapons. Out of my price range right now.

My wife hates it. Oh well. Jcordell

Re: Orphaned Image

It belonged to the Quigley Down Under page, but I had replaced all the images later on since QDU was my first page I screencapped and had all widescreen shots. I didn't know that if you saved over an image, it eventually stopped getting stretched, and I wasn't an Admin. yet so I couldn't delete them myself. I deleted that image and any other from that movie that pop up in random images. - Gunmaster45

Mauser Rifle Series

I was wondering since you added the Mauser 98 to the page if you think the Gew 98 should be on the same page instead of a separate page? I was thinking that it should be for everything else except the popular Gew98 ans K98k rifles. - Phoenixent

You rock on the Mauser photos they are beautiful. At Ellis we had 1891, 1895, 1898. Model 1935 and VZ's I just have to find my repair records before I list them. Thanks Steve

re:

I'm in the habit of making LOTS of new redirects, meaning that I do new pages for gun variants that we have grouped on particular pages, and then I redirect to the group page. The advantage is that it makes it simpler to insert gun page links when I'm doing a movie/TV page. Like, who wants to write [[Heckler & Koch USP#Heckler & Koch USP Tactical|Heckler & Koch USP Tactical]] when you can just write [[Heckler & Koch USP Tactical]] and be done with it? -MT2008 21:44, 15 March 2009 (UTC)

Heckler & Koch MP7A1 and Heckler & Koch 416

HI MoviePropMaster, I'm Gerry.I want to know if you can do me a favor, if you can upload pictures of a Heckler & Koch MP7A1 and the Keckler & Koch 416 I would greatly appreciate it, and great work so far.

XM16E1 Photo

Hey MPM, I hope that it did not upset you on the XM16E1 photo it was a configuration that most people have never seen or own. It was just one that was missing and the mod was a flash hider, chrome carrier to go with We Were Soldiers. If I did sorry. - Phoenixent

Your Break

You deserve a break, you've done a lot of hard work for us. I hope you find taking pics fun again, just remember, you alone have taken more movie gun pics than any other on the net. It was my fault for starting the whole Frankengun thing, but I think the best way to fix it is to not allow it from now on, and credit you for any of the ones in current use. I can imagine it must be frustrating to have people messing with your work. It annoys me how people like Kin93 almost MASS-PRODUCE your images in this manner, and I don't see your name anywhere on "his" pics. At least Steve told you he used your M16A1 and M16 pics. Kin93 never even contacted you. Anyway, hope your hiatus ends soon, we all love your gun pics and apoligize for those who don't appreciate them. - Gunmaster45

On the one hand, I think you definitely deserve a break. IMFDB doesn't pay the bills, after all, and anything you do for us should be done because you enjoy it, not because you feel obligated to do it.

On the other hand, I don't think you should take it too personally if IMFDB users make "franken gun" pictures. Yes, they should give you credit (as Kin93 failed to do), but it doesn't mean they don't appreciate your work. Whenever someone does that to you again, you should warn them that you don't like them butchering your work, but please don't treat all of IMFDB as if we're like this. Besides your gun pictures (which are awesome), you're one of the most valuable people on this site. Even if you never post another gun picture again, your presence would be greatly missed. -MT2008 18:34, 20 March 2009 (UTC)

Break

Sorry to hear about your most recent problem, and I agree, they should atleast give you credit when they edit your pictures, that's what I would do. And believe me, there are a quite a few users on here who apprecite your work. You are one of the most important users on this site because you have helped bring this site very far, and if there is anyone who deserves a break, it is definitely you. Hopefully you'll be able to find taking gun pictures fun again, and come back, but until then, enjoy your break. You will be missed.--Alienqueen11 04:14, 25 March 2009 (UTC)

Edit MPM2008, When you come back, I think you should see this:[1]

RE: THANKS! for the note of support

I'm glad to see your back and I'm sorry you had a tough time. We all missed you though, the site felt a little less complete without you. Sorry to hear that guy took credit for your work, I'm sure he'll get his soon enough >:)

BTW, check out the Dirty Harry movies, I've been working on them lately (I finished The Enforcer most recently) and am trying to get Sudden Impact done by tommorow. Anyway, welcome back! - Gunmaster45

Re: THANKS! for the note of support

Glad to have you back, and sorry to hear about the tough time you had during your break. Sorry to hear about the shotgun too, hopefully the credit found it's way to who it really belongs to. And I find those Franken Gun picture amusing too, everytime I see one, I wonder to myself how they do that, but figured it was photoshoping, did you see this one?:

Error creating thumbnail: File missing

Custom Hybrid gun made to resemble the firearm used by Emil Matasareanu in the North Hollywood Shootout - 5.56mm

About the Wiki page I showed you, Cutaway uploaded your picture of the Mark 23 with the supressor on it on that site, but I also contacted MT2008 about it as well, and Cutaway agreed to take it off the page, don't be hard on Cutaway though, I don't think he knew that you didn't want your pictures on other sites.--Alienqueen11 00:40, 2 April 2009 (UTC)

Glad you're back!

I'm relieved you came back. The past couple weeks just have not been the same with you gone. I totally understand what you said, though.

In your absence, we've still been enforcing rules regarding your pictures. Alienqueen and I took care of the pictures that Cutaway posted on the Gunpedia Wiki (he complied with my request to remove them). -MT2008 01:23, 2 April 2009 (UTC)

Welcome back!

Hey MPM, Glad that you are back hope things went well. I have been putting in some long hours down south also. Good to see your back at it. If there is anything we can do to help let us know. Thanks - Phoenixent

Re: AMT Pistols page

I haven't been talking to Rockwolf actually, I just figured I'd make the page because we needed it. It's understandable that no one wanted them, they are ugly and fire mostly unique cartridges. They are like 1911s on steroids. Anyway, I had Auto Mags on the mind because of the Sudden Impact page I'm soon to upload. BTW, how the hell do you write Auto Mag? Is it Auto Mag, AutoMag, or Automag? I figured it was the first since that's what's written on the gun in your pic (which looks great). That's a 180, right?

I'm proud of my Auto Mag III picture, since it was originally a gun on a rug, but I took the rug out. - Gunmaster45

So should I change the page name to AMT AUTOMAG Pistol Series? - Gunmaster45

re: Executive Decision

Thank you, sir. Though I think did get maybe a little carried away with pics of the Glock 19 (seven total, one of which shows just the magazine). Usually, when I do that, it's because a movie has made me enamored with the particular gun that gets more screencaps than the rest. Watching "Executive Decision" has given me the worst urge to go out and blow $$$$$ I need for tuition on a Gen 1 Glock 19.

When I see the 'crazy terrorist' with the Norinco Type 56-1 I always expect him to scream "I Blow You! Mother Bitches!!!!!" hahahahahaha.

Haha, I should have recognized him! It was indeed Shaun Toub [2] who played both the crazy(er) terrorist with the AK folder in "Executive Decision", as well as the store clerk in "Bad Boys". -MT2008

OK, wow, it happens that you post on my Talk Page at the same time I'm writing a response on yours! Haha. Thanks for the new "44 Minutes" M16 pic. Again, whenever you get around to it...Best, MT2008

Request

Excuse me, but I have a request. Could you combine your Remington 870 Folding stock, Ithaca 37, and MP40 images to make the cool looking Ithaca 37 from The Professionals? You just take the a pistol grip of the Remington, add it on to the Ithaca 37, and then put MP40 stock on it. I would really appreciate it. - Swordfish941

Here's a picture

Error creating thumbnail: File missing

The Last Crusade

Excellent work with the page, that was always my favorite Indy film (Indiana Jones, I mean). - Gunmaster45

I'm glad to here you're doing all the Indiana Jones films, I was so sick of how crappy they were. And I agree, your screencaps look very clear. I have to brighten and sharpen my images just so they can even come close to yours. I just finished brightening and resaving all the Sudden Impact caps so I'll upload them tommorow if all things go well. I should probably go to sleep, it's 3:35am. But tommorow's Saturday and it's spring break from school so who cares? - Gunmaster45

Re:Redacted

I can image that movie offended you (and other veterans), it made all soldiers look like pyschopathic rapists. But I cannot say I would want it removed. Why? Because then we are just as one-sided as the admins. on Wikipedia who delete all the negative crap about President Obama (remember how much we criticized that?). While the movie is offensive (as is Bowling for Columbine), they still have guns so who are we to say they are unfit to be documented on here. (but understand I still am for what you said, the movie was very offensive).

I'm a good example of why Redacted should stay on the site (about 4 years ago). I watched the film but didn't know all the guns that well, and thought "I wonder what they are using. What AK is that?" Even though I didn't like the movie these questions still arose. I doubt I'm the only person in the world who's done this, so those who hated the movie but still wanted to know what guns were used are at a loss.

So my vote for deletion is "no". - Gunmaster45

Edit: I understand you aren't picking on me, you have every right to hate the movie, as does every veteran. I just think that how you feel about a movie doesn't mean it should be removed from the site. Hopefully you understand what I mean and not think I'm being on sided or anything. I totally agree with you about the film. - Gunmaster45

imfdb is now controversial?

When did this happen? I haven't seen or heard anything.And if the site is now controversial who is upset about us? Jcordell

V.I.P.

Great job with V.I.P. so far. I haven't seen that show in a million years. I finally got the Dirty Harry movies done! Now I have a ton of other Eastwood films I'm going to do. - Gunmaster45

I'm not positive on what it is but it might be a Beretta 21A Bobcat threaded for suppressor, similair to this one:

Beretta 21A Bobcat threaded for a suppressor - .22 LR.

Fictional Firearm article moves

I like the changes you made to the fictional firearm titles, but gramatically speaking, the apostrophe should be before the 's'. It would only be placed after if it is a plural word ending in 's'. For example, the possessive of oceans would be oceans'. If it is singular it always ends in "'s" even if the word ends in 's' such as Jesus's. Hope that helps, if you care. -UW

fuck I should have known that. I was tired and it was late. I will change it later. Thx. MPM

re: Browning BDA

Nah, unfortunately, I totally forgot about the BDA when I did the page. Gunmaster was the one who recognized it based on your picture. For some reason, I kept thinking it was a Beretta of some kind and spent 20 minutes searching Beretta photos. My brain is kinda dead right now because I let myself get talked into running 8 miles this afternoon, on only 4 hrs. sleep.

I don't think it's a problem if you want to create pages for some new guns that may/may not be in movies. The only thing I find annoying is when people make pages for guns that couldn't appear in movies because they're only rare prototypes or variants that you know armorers wouldn't have (like the original SR9). Also, if you ever want to upload your MAG-7 shotgun picture, we can put it on the Romeo + Juliet page. -MT2008

Barb Wire

Hey,

It's awesome you're screencapping Barb Wire, but I thought I'd make some comments here (so we don't have edit conflicts) after looking at the screencaps with my eagle eyes ;)

(1.) The SIG-Sauer is a P228, not a P226. You can see in the first shot that the trigger guard is rounded, not squared like on the 226. Denzel Washington used an identical gun (maybe even the same one) in the movie "Virtuosity", with that same custom laser-control grip. LMO has a picture of it on their site under their "Movie Guns" section.
(2.) The gun you IDed as a Browning Hi-Power also seems to be the two-tone P228.
(3.) The Congressionals' M16s look to me like the MGC replica M16s, except with A2 handguards and A1 flash hiders. If you look closely, it seems they have the same style forward assist as the MGC M16s.

Here's the "Virtuosity" P228, which, again, looks like it's the same one that's used in "Barb Wire": http://www.longmountain.com/movieguns/Virtuosity

-MT2008 04:26, 9 April 2009 (UTC)

also you notice that there's a bunch more guys posting FULL frame screengrabs? versus widescreen? should I replace a full frame shot with a widescreen of the same shot (thus showing more of the picture?)..... MPM

I don't think it matters TOO much. I use widescreen myself when I can, but full frame is fine, too. As long as the guns are visible, that will do. :)

As far as replacing the Franken-guns, go for it. I've said before - nobody's entitled to complain when you replace images because yours are better (and they involve actual effort besides just going to Google or Photoshopping other pics). However, I'm starting to wonder how we can even begin to get every single variant. I mean, let's face it...there are SO many different Franken-M16s, H&Ks, etc. that you'd go insane trying to get every little variation. I wouldn't sweat it too much. -MT2008 21:25, 9 April 2009 (UTC)

Image

About the picture, remember when the servers switched back in October? Well, two images you uploaded were lost. I wasn't sure if you noticed or not, so I took that image from the old server and uploaded here, and credited to you.--Alienqueen11 23:43, 10 April 2009 (UTC)

images

What with people overwriting images with the same images that are already on the site?

[3] [4]

--Alienqueen11 03:10, 11 April 2009 (UTC)

Crank: High Voltage

I was watching the red band trailer for Crank: High Voltage and I took some caps but the video quality was so crappy only one of the pics was even close to site-worthy. Since you seem pretty good at finding excellent quality HD trailers, I was wondering if you could take a look at it. That is if you aren't too busy. Thanks. - Gunmaster45

Enemy at the Gates

I watched Enemy at the Gates last night and saw some guns you missed, so I added the caps to the page, as well as a few minor add ons to the existing guns. It's your page of course so you decide what can stay or go. I tried to make every shot I took very important and took as few as possible. You may notice my images match yours pretty close, I finally figured out how to match your cap format. I need to brighten a little more though, they still look too dark. - Gunmaster45

Like I said, it is your page, you can remove any images I added if you don't like them. I only added one image to the Mosin Nagant section so Joseph Fiennes could have an image for his page if needed, and added two to the sniper version, because they were pretty good close ups. I also added three shots to the Kar98k sniper section, although the closeup in his room isn't the best so I suppose it could go. It's all up to you. - Gunmaster45

RE:

I definitely do not remember that one being in the third "Die Hard" movie. Our page doesn't have it, either. Hmmm...

As for the last post: "All you need for a movie is a girl and a gun." - Jean-Luc Godard (and yeah, he was a commie bastard, but he spoke wisdom on this point) -MT2008 22:38, 12 April 2009 (UTC)

A DEA agent used one in Con Air if you were wondering. - Gunmaster45

Yeah, I'm replying to what you said in Matt's talk page. Now that I think of it, that could be th gun Pamela Anderson is holding. I'll check out Bionic Woman now. - Gunmaster45

Category:B&W

Hey MPM, I like your new sub-category for B&W films I came up with an idea for you. How about a category for Widescreen since it did not exist until after World War II somewhere about 1951 or 1952. Just a thought for you. - Phoenixent

Happy Easter to you too MPM. Don't let them get to you. - Steve

Bionic Woman

Nice job on the page! It needs gun photos and links, of course, but we'll get on that. Anyway, here are some quick observations...

(1.) The MP5s you IDed as MP5A4s seem to have collapsible stocks, which makes them MP5A5s.
(2.) The Serbian gangster's pistol, which you IDed as an S&W 5904, looks like a Browning BDA (the DA version of the Hi-Power, not the BDA-380).
(3.) John got the last two right...they are a CZ-75 (or some clone) and a two-tone Walther P99, respectively.

Take care. Hope you had a happy Easter! Also, when I get home (I'm at work now...ugh) I'll have to put in my "Die Hard III" DVD and see where that Seecamp 32 that's on LMO's site appeared. I really don't remember it, but I'll look for you. -MT2008 19:53, 13 April 2009 (UTC)

RE:

Ah, thanks for the new gun pictures! We really needed a two-tone Walther P99 because there are a LOT of movies that have them (The Bourne Supremacy, Underworld, A History of Violence, Far Cry, etc.) I thought about asking you for one a while ago, but decided I should let you prioritize other stuff. Also, while I don't have screencaps for it, there were Browning BDAs used by Tibetan separatists in an episode of Ultimate Force, so we can use that one on that page, too.

Also what is with the gigantic ... but blurry ... screenshots that I see other users uploading?

What do you mean? Can you show me examples? -MT2008 21:31, 13 April 2009 (UTC)

Spawn AMT 380 Backup Pistol

Hey MPM, That AMT 380 Backup Pistol that's used in Spawn is just dirty or due to the lighting. AMT built the Backups in Stainless Steel only with the frame and top of the slide bead blasted. My aunt worked at AMT and I knew Harry Sanford since I was a kid until he passed away. - Steve

Hey MPM, No problem on the id for the Backup. AMT which was the last name for that company had several locations. As a kid I went to two different El Monte shops and my aunt worked at both Covina and Irwindale. I think my aunt has a couple of the earlier Backups I will see if I can get a photo of them. I filled in a few blank spots on unknown weapons on pages. It was fun doing that as making new pages can get a little tiring. - Steve

AMT

The AMT Backup is really nice! It's good we have a picture of one for my Spawn page. I was about to upload a Google image search result, but obviously, yours is waaayy better.

So, I checked "Die Hard III" (got through about an hour last night, another hour this afternoon) and I don't know where the hell that Seecamp .32 appears in the movie. Either my eagle eyes are failing me (possible), or LMO got their facts wrong. Or maybe it was rented for "Die Hard III" for a scene that wasn't filmed. But it appears nowhere in the finished film that I can tell. -MT2008 01:32, 15 April 2009 (UTC)

Re: Scarface talk page

Yeah, now that I read what it said you're probably right. I just assumed it was some anonymous user trying to cause trouble. Whether it was or not, you're right - the discussion there is invalid now so I got rid of it again. Thanks for prompting me to take a second look, you were definitely right. Oh and a quick sidenote, the Bionic Woman page is looking great! You certainly put a good deal of work into that it looks like. I didn't get to see it when it was on but it looks pretty good from the caps you got. Speakeasy804 03:53, 15 April 2009 (UTC)

High Standard 8111 page

Hey MPM,I placed your High Standard K120 Shotgun photo on this page although the page name is not correct. Jcordell listed it by the High Standard catalog number 8111 instead of the Model name High Standard FLITE KING. If you could fix this please. Thanks - Steve

Hey MPM, Thanks for the correction on the page. - Steve

Re: Thanks

I can certainly understand the burnout feeling, especially when working with TV shows with so many episodes. That would be great if they would get those pictures; IMFDB is certainly indebted to you for all the hard work you're doing to get us exclusive pictures like that! Speakeasy804 07:35, 17 April 2009 (UTC)

RE: Did you take this picture?

No, I just jacked it from google and touched it up with photoshop. Feel free to replace it whenever you want. - Gunmaster45

RE:

That would be REALLY cool if you got pictures of some of the sci-fi guns. There are a lot of pics of the Moritas floating around the 'Net, but most of them are (A.) shit quality, or (B.) the rubber stunt versions. We both know yours will inevitably be 100x better! Haha.

Also, I notice you were curious about these machine pistols from Timecop:

Error creating thumbnail: File missing

I don't know what this damn thing is called, but it appears in quite a few TV shows and movies. Excalibur got some GREAT pics of them appearing in Smallville:

Error creating thumbnail: File missing

They also appeared in at least one episode of the TV show Viper (which also had the Timecop Taurus PT99 in its pilot episode) and I think I remember seeing them in an episode of The X-Files as well. Some of the ones used in Smallville seem to be the same ones used in Battlestar Galactica, and we have a picture of a rubber stunt version:

Error creating thumbnail: File missing

Do you think your Canadian armorer acquaintances would have any idea what they might be? -MT2008 22:46, 18 April 2009 (UTC)

Re: Image overwrites

I agree with you about the overwrites, I think you should be only one who is allowed to decide whether your images are to be overwritten or not. It just annoys me when some random user overwrites one of your images when it's not theirs. BTW, Great job on you most recent gun pictures.--Alienqueen11 20:55, 19 April 2009 (UTC)

Re: Old Movies

Hey MPM, Thanks for the compliment on the old movies that I have been posting. Some of them are harder to get clean screencaps on as the master has not been restored. But that is something I a lot of in my own library so I will keep filling the empty spots. I also have westerns dating back than also those will come in due time. One more note for you as it is important to both of us SAG signed Friday and will announce Monday. - Steve

re: bourne

Thanks! Yeah, I figured that because of its age and its less action-oriented story it would have less guns but it surprised me! Trying to identify that rifle really bothered me, I looked through a bunch of H&K and SIG rifles but then when I saw the side shot of it (which is much too brief), I wondered the same thing about the Ruger. That was really the only trouble I had save for the two pistols I currently have labelled as "unidentified" and the CZ-82 I had labelled as a Makarov (but GM45 helped out a good bit with identifying that, as well as noting the Beretta as an original 92 model rather than the 92S I had it labelled as). All in all it wasn't a bad movie at all, if some parts were a little slow (probably to draw in a more diverse audience rather than the typical espionage/action crowd. Speakeasy804 18:56, 20 April 2009 (UTC)

Re: New images

Nice! I'm so glad we have a two-tone Jericho now. It seems like every other action movie made these days features the lead bad guy using a gun in the exact same configuration. As far as getting a two-tone FS model, I think it's mostly the British armorers who use that model because as best I know, the 941FS was the only version ever sold in Europe. I think the two-tone 941FS pistols that you see in Hot Fuzz, Casino Royale, Tomb Raider: The Cradle of Life, and Children of Men are all the exact same gun, because all of those shows were supplied by Crowntower, Ltd. (according to credits). It's likely that you're seeing the same pistol being reused in many films. Fortunately, there are plenty of American action movies which use the original model with the slide safety in two-tone (i.e. my page for Under Siege 2: Dark Territory).

I'm also happy to have a good Benelli M3, too! Thanks again for all of these. -MT2008 18:51, 23 April 2009 (UTC)

Nice!

Awesome work on the new pictures, we needed a two tone Jericho 941. From the looks of it many of the movies on here use the early model Jerichos, the only page I've seen that had a Jericho without the safety on the slide is District B13. Anyway, Thanks for the new gun pictures, they're highly appreciated. By the way, is there a such thing as a reverse two tone Jericho 941? Just wondering.--Alienqueen11 21:11, 23 April 2009 (UTC)

Excellent work, I kind of missed seeing your work. Screencaps improve the site but your images complete it :). If the '94 doesn't have a saddle ring or holes for one, it isn't a saddle ring. I'd say its a Trapper Carbine, is the barrel 16"?

Re:

Nice picture...I would say how about a Vertec section under the Beretta 92 page? -MT2008 03:42, 26 April 2009 (UTC)

if you watch 2:55:58 of a bridge to far you will see german soldiers with m1 garands , I think they must have had a shortage of k98k's in this film.

Hey MPM

Someone is using your Lee-enfield No1 MkIII picture in this wikipedia page: http://en.wikipedia.org/wiki/Lee_Enfield_rifle Oliveira 15:06, 3 May 2009 (UTC)

Taps

I remember you asked if I had Mr. & Mrs. Smith and Taps, and guess what? I bought Taps. I have it sitting in my screencapping box and will try to do it soon. I also grabbed Appaloosa, which I've been meaning to grab for a while. I'll be screencapping that now. :)

This is irrelevant, but I got to hand a Federal M201-Z gas gun today. I went to this man's house who was a former Correctional Officer, and he owns one. He said he owned a gas gun and I asked if it was a Federal M201-Z, which shocked him since most people don't know these guns off the top of their head. Needless to say I thought it was awesome. - Gunmaster45

Thank you for Troll Removal

Thank you for removing the troll who was among other things messing with the content of the M16 page. I've gone through and undid several other posts by this person as they contributed nothing to the pages modified. Rockwolf66

Re:Chuck guns

An armorer from ISS has been sending me photographs of stuff from their inventory that has appeared in movies and TV shows, including the guns from "Chuck". I'm also going to be posting photos of an M1903 Springfield from "Letters from Iwo Jima" and a nickel PPK from the "Austin Powers" movies that he sent me, too.

Also, did you check out some of the pics I posted on The Spirit page? I got great pics of Samuel L. Jackson's revolvers from that movie, and of the O/U shotguns he used, plus Eva Mendes' Beretta Jetfire. -MT2008 13:38, 9 May 2009 (UTC)

RE:WTF?

As much as I love the Resident Evil videogames and it's guns, I would have to say no to a Samurai Edge page. The Samurai Edge is basically a Beretta 92FS with modified parts, but is still visually the same looking gun, not too different to be worth noting on anything else beside the videogame pages, mockups such as the Aliens' Pluse Rifle are a different story. Plus, not only did he make the page, but it seems that the user copied and pasted the entire article off the Resident Evil Wiki up to the placement of the images, See here [5], and you'll notice everything is the same. I would say delete the page, but I would get word from MT2008, and GM45 before doing anything.--Alienqueen11 00:45, 12 May 2009 (UTC)

Plagiarism is a huge no-no. So, it is now gone. I would maybe say OK to an entry on the Beretta 92 pistol series page, but certainly not if everything is copied word-for-word from another Wiki. If we see that, there's no reason not to shoot (delete) on sight. -MT2008 00:57, 12 May 2009 (UTC)

No problem MPM2008, I deleted the article.--Alienqueen11 02:22, 12 May 2009 (UTC)

Re: 7.7mm Arisaka Type 02 Paratrooper Takedown rifle

Hey MPM, Same that people have to chisel others out of what they have. I know how that goes I just try not to think about it anymore. The 7.7mm Arisaka Type 02 Paratrooper Takedown rifle was at Ellis Mercantile as that was were the guns came from for Dirty Harry except for the Model 29. I looked at it and just shook my head at what they did to sporterize them. We also had the 7.7mm Arisaka Type 02 Paratrooper Takedown rifle that was used in the Manchurian Candidate. -Steve

Tutone Taurus PT92 AFS

Your images are always useful. I put it on the Shoot 'Em Up page, as that is the only page off the top of my head that I know has that gun in it. Excellent work as always. - Gunmaster45

Thanks, I didn't even notice that. Again, excellent image. - Gunmaster45

Remington 700P

MPM, as far as the PSS entry goes someone was converting all of the 700PSS entries to 700P entries. I put a bit of data on the 700 Police entry so that hopefully People will realize that not every black remington 700 is a P model. I myself own a 700P in .300 Winmag and someday I should try and get a good photo of is so that we can referance the barrel contures. Rockwolf66 23:02, 13 May 2009 (UTC)

I am changing all the 700P entrys back to PSS enties.Still as I'm not at home and I don't own a PSS I'm not going to make any judgements on if the rifles really are P models or PSS models. Rockwolf66 20:37, 14 May 2009 (UTC)

Shotgun Blanks

Hi MPM, I was wondering if you could help me out with something. Me and my dad are building 12 Gauge shotgun blanks with a reloading press for a movie I'm making in June with some friends, and we were wondering, is there an alternative method of packing in the power than to keep the plastic wad in? Because that plastic wad can be lethal and while we know are safety, sometimes we have to fire blanks at people. Now, he figures something like a wad of cardboard could replace it, but we don't want to try anything unsafe without some more information.

Since a box of 20 blanks is $30 bucks, we figure shotgun blanks are way cheaper to make ourselves. I hope you know a method, or else I may have to pull out the heavy kevlar vests my dad has ;). Or we are going to have to use a LOT more camera tricks. - Gunmaster45

Taurus PT92

Hey MPM2008, thanks for the new Taurus PT92 pictures, they're amazing, especially the two tone ones, keep up the good work.--Alienqueen11 06:03, 14 May 2009 (UTC)

Yeah, I greatly appreciate those pics, too! The one with the wood grips looks identical to the PT92 that I used to own (although I replaced the wood grips with a set of Hogues not long after I got it). And the two-tone is awesome - did you make it with Darkman II in mind? -MT2008 02:36, 15 May 2009 (UTC)

Reply

You're welcome, and yeah, I remember the days when we had those crappy images. I even used to be impressed by some of them, but then when you came along, you showed we otherwise, and now I can't stand looking at airsoft images on this site. No one can shoot gun pictures better then you. And awesome work on the Mossberg 590, Yournamehere asked for it, and there's a place for it on the Dead Presidents page, I'll be sure to put it there right now. Thanks once again, you have out did yourself once again.--Alienqueen11 03:36, 15 May 2009 (UTC)

No problem, and don't worry, I'm sure you're fine. We all get that way after alot of hard work. And by the way, is that Mossberg 590 something that should go on your page?--Alienqueen11 03:55, 15 May 2009 (UTC)

Haha, Alienqueen beat me to the punch. But I agree...of course your images are so much better than airsoft images. Remember when our SP89 image used to be a picture of an airsoft MP5K with an SP89-style hand guard? I cringe at the memory now.

BTW, sorry I haven't been on so much recently, but between the move out of my apartment in TX and my crash-course in Arabic, I've been pretty busy. -MT2008 04:00, 15 May 2009 (UTC)

Mossberg 590 from Dead Presidents

Thanks for finally uploading it with the wood furniture, now the page looks cooler. I also saw you uploaded a Model 36 Flat Latch so I'll change that if it hasn't already been altered. ~Yournamehere

Re: Inox

Yeah, two-tone P226s are pretty common in movies. The "reverse two-tone" from 2 Fast 2 Furious is rare (mostly because it wasn't available that way from the factory), but the normal two-tone (nickel slide, black frame, nickel controls) has been in plenty of movies. At the very least, I figured we needed one for the Face/Off and Bad Boys II pages, since the tutone P226 is very prominently featured in both of those movies.

As far as the Inox goes, whenever you can get around it, please do it. The fact that we don't have a good image of a 92FS Inox is kind of embarrassing, since the stock image used on our Beretta 92 series page has appeared on almost 75 movie/TV show pages now. The way I see it, the more a gun image appears on IMFDB, the more urgent it is that it needs to be replaced if it hasn't received the MPM2008 treatment yet.

And yes, I agree that the newer Inox Berettas are pretty ugly; the fact that the controls are now black was obviously done to lower production costs. The older ones look way better. Also, I don't think I've seen an Inox with black controls in a movie (besides Shaft, which featured those cheap 8mm blank replicas that also had black controls), and as I know we agree, it's best to use guns that look identical to the ones which our visitors have seen in their favorite action films. -MT2008 01:29, 17 May 2009 (UTC)

Something you should check out

Have you seen this:

http://www.imfdb.org/index.php/Special:MostImages

This shows the most-used images on IMFDB, and of course, they're all gun images. Anyway, you can see that most of them are gun images you uploaded, but a few in the Top 25 aren't. The Browning M2 image that was uploaded by Bunni when this site was started has been on 108 pages, the Inox image has been on 74, and the M60 has been on 70.

Anyway, I mention it because I think it's a good guide for stuff to prioritize. -MT2008 01:37, 17 May 2009 (UTC)

MP5K request

I apoligize for requesting an image (I'm not sure if I'm allowed to yet or not [?]) but I've noticed that more and more movies use SEF MPK5s with the foregrips removed to make them machine pistols (including Taken which I just finished screencapping) so I figured you'd be the man to find one. Thanks, and again sorry. - Gunmaster45

RE: Calico Weapons page

Great work, The page looks great. The Calico Rifles are probably the most futuristic guns I've seen, they look like something out of Star Wars. I'll be sure to keep a look out for any Calicos on movie pages, I listed Bad Boys on th page just now.--Alienqueen11 19:51, 18 May 2009 (UTC)

Well, it's interesting you say that, Alienqueen, considering that the Calicos have been around for over 20 years now!

MPM: The page looks much, MUCH better now. I suck with Calicos myself (now that they're so much harder to find), and I get lost with the different variants. Also, have you ever noticed that Calico used to call their weapons the "Liberty I" and "Liberty II"? What is with the "Liberty" nomenclature, and which guns does it apply to?

Oh, yeah, and are you sure the Deep Rising Calicos are the M955A? Not saying you're wrong, just that I personally can't tell the barrel length with those fake rotating barrels on them. -MT2008 22:50, 18 May 2009 (UTC)

OK, thanks for the explanation about the "Liberty" thing. As far as Deep Rising goes, what you are saying makes sense. -MT2008 01:12, 19 May 2009 (UTC)

Small Request

Hey, MPM2008, I'm not sure if you're still calling a hiatus on requests at this time, but if you're not, I would like to know if you can upload another Remington 870 Police riot shotgun like the one here [6], but with synthetic furniture if you get the chance. Thanks, and sorry if I added to your list.--Alienqueen11 19:51, 18 May 2009 (UTC)

@@ Line 1,971: / Line 1,971: @@
 :Oh, yeah, and are you sure the ''Deep Rising'' Calicos are the M955A? Not saying you're wrong, just that I personally can't tell the barrel length with those fake rotating barrels on them. -[[User:MT2008|MT2008]] 22:50, 18 May 2009 (UTC)
+::OK, thanks for the explanation about the "Liberty" thing. As far as ''Deep Rising'' goes, what you are saying makes sense. -[[User:MT2008|MT2008]] 01:12, 19 May 2009 (UTC)
 == Small Request ==
 Hey, MPM2008, I'm not sure if you're still calling a hiatus on requests at this time, but if you're not, I would like to know if you can upload another Remington 870 Police riot shotgun like the one here [http://www.imfdb.org/index.php/Image:Remington870PoliceStd.jpg], but with synthetic furniture if you get the chance. Thanks, and sorry if I added to your list.--[[User:Alienqueen11|Alienqueen11]] 19:51, 18 May 2009 (UTC)