Python ... sorry Predator20 .... I am just learning how to use this site. would like to set up a page like yours ! beats Facebook !!! I do have a page (I thought) "Canecorso" .... any help would be awsome !
Thanks
Are there plans for this page? Just curious. --Jcordell 10:34, 13 January 2012 (CST)
According to the information I have in my file about the shooting (I'm a rangemaster with my department so I collect data) the agents were carrying the classic "F.B.I. Load" in their revolvers. The 158 grain +P semi-wadcutter hollow point. It's a good load. Dove and Grogan had the 115 grain Winchester Silvertip hollow-point in their S&W autos. I carry the Federal HST 124 grain +P hollowpoint in my Glock 19. But then much of what we now use in law enforcement is directly due to the Miami shooting and what was learned. The ramifications have gone far beyond just the creation of the .40 S&W.--Jcordell 11:03, 13 January 2012 (CST)
Actually I'm with you. The Airweights and Scandiums are nice to carry, but I don't like shooting them. The .357 magnum Scandiums are terrible to shoot. Which is why I own a Smith & Wesson Model 49. It isn't that heavy to carry, but that all steel frame is nice for recoil control. Well that and the Pachmayer Compac grips I have on it. I have to say that i have come to really like my Glock 19. I had no real experience with Glock before I was issued mine in 06. I have since come to really like the G19 and the 9mm Parabellum. I also own a G26 which I like as well. It's funny. When I was younger I was all about magnums and 45ACP. I sneered at the .38 Spl and 9mm. Now all my handguns are 9mm, 38 Spl and 22LR.
Well that's not entirely true. I own a couple .357 magnums and a Webley Mk VI, but I primarily shoot 38 Spl/9mm and 22LR. They're more affordable, comfortable to shoot and I shoot them very well. Good bullet placement beats missing with a magnum. Anyway I also carry a Remington 870 loaded with 00 buck and slugs when on patrol and several other officers on my patrol team carry AR-15 rifles. So I have artillery as well.--Jcordell 20:01, 13 January 2012 (CST)
RE: SIG cont.
It looks pretty nice! I've always loved the "reverse" two-tone SIGs (like the one in 2 Fast 2 Furious). That being said, if it says "Made in West Germany", that means it was made before 1989. Are you OK buying such an old gun that you can't inspect up-close? I'm kinda paranoid about buying guns that I can't inspect first, but if you're OK with it, then go for it. It's definitely a good-looking piece, and I think no gun collection without a SIG is ever complete (though I have an obvious bias).
Also, CCR does a great job on finishes (my 226 had its slide re-finished by them). If they did any work on the gun, it's probably in good shape, but personally, I would rather try it before I buy it. -MT2008 13:35, 20 June 2010 (UTC)
The checkered style gives a better grip, but you can't use the newer trigger bar springs with them (only the old ones, which have a tendency to break after extended usage). My recommendation is that when you get the gun, ditch the "pebble" grips and put on a set of Hogues (provided your hand is big enough). That's what I've got on my 226 right now. -MT2008 00:27, 21 June 2010 (UTC)
Sorry I didn't get back to you sooner, but I like the two-tone one better. I think you made the right choice. And yeah, don't get the finger groove Hogues, those are too big. The regular Hogues are also pretty thick, but they do improve the grip. In my opinion, they're superior to the factory grips. -MT2008 22:42, 21 June 2010 (UTC)
RE:
Blocked him. Thanks. -MT2008 23:26, 25 June 2010 (UTC)
I would need to see either the receivers or the sight to be sure. If they're real guns, they're most likely to be Norinco Type 56s. But if they're replicas, probably Hudson model gun AK-47s. Also, hope you enjoy the SIG; post pics when you get it! -MT2008 01:07, 1 July 2010 (UTC)
Looked at 'em closely. They have milled receivers, so my guess is that they're the Hudson AK-47 replicas. When there's multiple types of a certain weapon in a scene, you're usually looking at replicas of some sort. Like, if there's a cache of M16s, there's usually going to be some MGC replicas. Same with the AKs. -MT2008 02:48, 3 July 2010 (UTC)
They are NOT Hudsons. I have Hudsons. I will post a pic of a Hudson soon. Those are .22 LR clones (not the new ones, but the old ones from the 1980s). Not Armscorp but I think some other company, perhaps Armi-Jager. The handguards are indicative of the strange .22LR clones of the AK from decades ago. MoviePropMaster2008 01:02, 5 July 2010 (UTC)
Corrected that problem. Also, hope you get the SIG soon. At least you live in a state that has sane handgun laws. NC's are just...well, retarded. Oh, and happy 4th! -MT2008 23:21, 4 July 2010 (UTC)
Got 'em. In the future, though, can you also put the delete tag on them? I'm kinda busy this week (on the road a lot) and don't know how often I can be on the site. If you put the delete tag on, then at least another admin can get them if I'm not around.
Can't wait to see the SIG. Hope it serves you well. -MT2008 20:57, 7 July 2010 (UTC)
Just put [[Category:Delete]] on the picture (hit "Edit" and type it in). You can still point me to it, but this way, if I'm not around, someone else might see it. This is the page listing all the stuff with the Delete tag: http://www.imfdb.org/index.php/Category:Delete -MT2008 21:07, 7 July 2010 (UTC)
Featured Article
Sure, feel free to edit the photos. bunni 02:18, 9 July 2010 (UTC)
Pinko
Well the guy is definitely British, or some kind of influence in his language. I know they are the only countries that calls us Americans "Yanky", but the way he writes is definite up there and only UK uses the worse arse Excalibur01 16:51, 22 July 2010 (UTC)
Thanks for heads up. I'll check my other uploads. --Ben41 00:11, 24 July 2010 (UTC)
Re: Hunter
I've actually been considering making it a featured article; should I do it by season or the show as a whole? I'd go by season but I don't know if that'd be wise since not many people have heard of it. Then again, it may be a nice way to introduce people to the show and show off some of the various firearms used. What would you recommend? - Speakeasy804 15:41, 24 July 2010 (UTC)
New anonymous member
I checked ALL of the other edits and everything else seems okay. it seems like he's learning the system and how to edit on IMFDB. That one you caught is a pretty big screwup, but so far none of the other edits are vandalism. I will try to keep an eye on him, but he must just be another noob who is unsure how to do the pages correctly. MoviePropMaster2008 02:09, 25 July 2010 (UTC)
RE:
Thanks for that info. I'm suddenly not sure whether I should do anything, though. As far as I'm concerned, if the people who wanted me to take down the original image want to get angry at this other guy, that's his problem. -MT2008 23:40, 27 July 2010 (UTC)
Admin
Hey, Brian, I have a question: Do you want an Administrator position? I think you're actually overdue for the promotion, and we need good people like you on the Admin team. If you want, I can email Bunni to ask him to give you the new status. -MT2008 01:33, 3 August 2010 (UTC)
Good idea! I also asked Ben41 if he wanted it. -MT2008 01:42, 3 August 2010 (UTC)
Thanks for the vote of confidence
Thanks for putting in the good word. Guess we're going to have to learn something new. Should be fun. --Jcordell 02:15, 3 August 2010 (UTC)
BTW - a belated Congratulations on your promotion to Mod
Now you will have to fight the trolls/idiots/fanboys even MORE! hahahahaha(evil laugh). Congratulations!!!! MPM
Delete section
I found a bunch of pages and screenshots not deleted by anyone here: [1]. Unfortunately, I rarely see admins go there. - Kenny99 15:05, 14 August 2010 (UTC)
Stan's wacko watch
Hey man, remember me? Maybe not. Interesting how massive one's talk page gets when they become an Admin.. Congrats on that BTW. That said, I figure I'll let you know about this (if you don;t already), and I suppose you can pass it on to MT2008 and the others. Anyway, I think there's a problem with 76.121.27.16 - He's been warned several times before to stop uploading/posting redundant gun images on pages (I just remembered MT was one of the ones who's warned him), yet he's kept on doing it. He's done a handful just earlier today that I've reverted back. I hate tattling on another guy but I have have a feeling I'm not the only one he's annoyed with this crap. The guy does seem to add to the site and all, but I just don't like him continuing to do this stuff, it's kind of irritating. So, well, there ya go. Again, I just remembered MT told about this a few months back, but it seems he didn't care to listen, so, I don't know. StanTheMan 00:16, 31 August 2010 (UTC)
Ah, good. Thanks, man. StanTheMan 03:19, 31 August 2010 (UTC)
I found a vandal 75.31.96.25 - He just made one comment, but it's a rather tasteless one and should probably be hit on the head with the banhammer anyway. Another good anonymous guy edited it out already, but, thought I'd let you know. StanTheMan 16:31, 31 August 2010 (UTC)
- Another one 71.91.170.82 - he's removed content from pages, which I've reversed. I warned him on his talk page but you should probably keep an eye on him. Or just ban him, your choice I guess. StanTheMan 18:27, 8 September 2010 (UTC)
- Got another dude who's apparently flipped his shit lately. However, the dude's made shitty comments elsewhere and I've also had to revert sections he's deleted before, too. - 173.62.63.157. StanTheMan 04:05, 17 September 2010 (UTC)
- Ah. Well, I guess it's nevermind then, Pred. Maybe you'll get the pleasure of the next one, heh. StanTheMan 00:04, 18 September 2010 (UTC)
- I know you got this one already (74.63.112.138), but damn if this comment didn't give me a chuckle (can i request i be a mod? cause you know im awesome so yea. just tell me when thats done k? k...peace bro) Bah. StanTheMan 18:26, 19 September 2010 (UTC)
- Yeah, you have a real fun job, now! ;D StanTheMan 18:44, 19 September 2010 (UTC)
Stevens 520/620 Shotgun
The Stevens 520/620 is a John Browning design. The 520 went on the market in 1904 and was discontinued in 1932. The 620 was a more streamlined version. The abrupt angle at the rear of the reciever on the Model 520 was eliminated with the 620.Other than that the 520/620 are mechanically identical. The 520/620 was manufactured in 12, 16 and 20 gauge. The 620 was discontinued in 1955. Both models were avilable in riot configuration and sport/field configuration. I saw you post on Nyles discussion page. Also I think a 520/620 page is a great idea. --Jcordell 02:05, 31 August 2010 (UTC)
Stevens 520
As I understand it (and I'm a little fuzzy on the details myself as there's not all that much info available), the 520 was the original model with the stepped receiver, and the 520-30 was the later model with the flat receiver (pictured). Very cool shotguns, actually - they were designed by John Moses Browning and were actually the first side-ejecting hammerless guns on the market. They were made 1904-1932 and then another production run in the 40s for the US Army in trench gun configuration. - Nyles
Russian Spammer
Hahaha. Good job on the ban hammer! You seemed unsure whether or not that Spammer you blocked was really a spammer. I speak Russian and can read it only so so. But that entire blurb was a nonsensical paragraph about how to buy cars. It was definitely SPAM. Funny since our Russian user Kloga has argued that he has 'never seen any Cyrillic Spam on IMFDB' LOL! MoviePropMaster2008 15:41, 2 September 2010 (UTC)
Front Page
I added Stargate SG-1 yesterday and was wondering: What articles qualify for the random featuring? Obviously games are out of the question. And they have to have a certain standard. But: Is a certain length (amount of firearms), or completion of details like cross linking (actor pages etc.) necessary, too? I did not find anything about this in the rules. --Milkovich 08:04, 6 September 2010 (UTC)
Also: There seems to be something odd going on with the featured article frame. From time to time the place appears blank. --Milkovich 17:16, 6 September 2010 (UTC)
Re: Blank feature article
If I remember correctly, it´s on the FeaturedArticle and the Main page. The thing is that the frame is empty. So I can not tell whether it is a specific movie or just a single line of coding that is messing it up.
btw.: Can only admins redirect pages or change the title of one? Driven To Kill should - according to IMDB - be Driven to Kill. No capital T. --Milkovich 17:52, 6 September 2010 (UTC)
Thanks
Okay. thanks for the head up. --Jcordell 23:35, 12 September 2010 (UTC)
TOC format
What works for me is putting "Film Title" first, putting the poster info right underneath, and then the TOC br clear=all. --Ben41 20:51, 15 September 2010 (UTC)
Combining Grindhouse
Since the two films were released overseas and on video as separate films, I think it would be best to keep them as separate pages and put a link to the Grindhouse page. --Ben41 21:43, 16 September 2010 (UTC)
They're already on the page. I done that as one of my first deeds here. :) --Kloga 21:47, 16 September 2010 (UTC)
And how many pictures of Hobo should be scrapped? :( --Kloga 21:50, 16 September 2010 (UTC)
About Hobo - OK, i'll delete something. :) --Kloga 21:55, 16 September 2010 (UTC)
Wait, wait, wait! 6 pictures of ALL the trailer is the maximum, or you mean just the Hobo's Shotgun pictures? If the first variety - it's terrible. --Kloga 22:00, 16 September 2010 (UTC)
Done. Even 5, not six. :) By the way, I'll found that video of Werewolf Women of the SS is officail - it from Rob Zombie's channel. Can i restore the pictures from this trailer. I was trying to write about it to Ben41, but he's ignoring me. :( --Kloga 22:08, 16 September 2010 (UTC)
Beretta 92FS
It was you who identified it in Grindhouse? Just wanted to know how did you do that (if it's you, of course). :) --Kloga 13:55, 17 September 2010 (UTC)
Thanks for your answer. It's exciting to know such details. I do know, that many guns have their own features, but sometimes it's hard to tell what is that features and it's hard to know all, like that one with the exposed barrell in 92FS.
Also wanted to ask - is it a kind of ethics or something for this site to credit, who recognised the gun (if it's not the permanent writer of an article), like in the Miami Vixe series first season article? --Kloga 21:21, 17 September 2010 (UTC)
Re:Total Recall/Goncz
(From above section) Have you checked out the deal with the Total Recall page? I posted a bit extra myself in the Talk page, but, oh man, I really hope it ain't that serious.
I agree, I feel we have an obligation to note the Claridge info as a resource for background on the gun itself. But, I guess that may not remain so. Well, lets just say it got be a bit perturbed. I remember what one banned member (movieman1993 or something) said that 'we wouldn't get legal problems you fools!' or something to that effect. Bah, wish he was here just so we could prove him wrong. Oh well, I guess we'll see what MPM and Bunni do. StanTheMan 18:43, 19 September 2010 (UTC)
Yeah I think it's odd and we really don't know if the poster is really Goncz. But I' sure we'll get it worked out. --Jcordell 18:47, 19 September 2010 (UTC)
RE: Actor Page
Well, I had to take off almost right after I set up the page. But, I probably would have forgotten to search so I appreciate the help, and I'll keep that in mind next time. Thanks, man. StanTheMan 02:46, 20 September 2010 (UTC)
Lame page makers
How much you wanna bet that all these noob IMFDB members who make pages for kids movies, either Nickelodeon or Cartoon Network, are all around the age of a 7th grader? I recently deleted a project which wasn't even a movie, it was a video taken by a 7th grade class as part of a school project. I was stunned that the page maker took the project as being one of serious merit (and their spelling and grammar sucked) so I assumed the originator was a kid. MoviePropMaster2008 17:17, 4 October 2010 (UTC)
Boxcar Bertha
I'm fairly certain it's a Remington Model 10. Look at the reciever and the end of the barrel. --Jcordell 12:22, 9 October 2010 (UTC)
Snagging can be overcome with practice, but why when there are so many great hammerless and concealed hammer models now days. If you plan on shooting your concealment piece frequently I would suggest one of the S&W J frames. Personally I like the 649 or 49 and there are still many lightly used S&W J frames out there that will cost you a anywhere from a couple hundred to several hundred dollars less than a new one. The 38/638 is a good gun, but the alloy frame isn't as sturdy as the all steel if you're looking at a lot of shooting. Also if you can find one of the Ruger SP101 with the 2.25" barrel with the DA hammer you have a good little revolver there. However alot of folks prefer the trigger action on the S&W revolver. I prefer Smith & Wesson, but I appreciate Ruger and aknowledge that the company makes a very solid and strong revolver.Just remember that the Ruger is heavier, but will also withstand alot of heavy usage. Look at your requirements.
Now be careful with Colts. Like I said in that other posting the old Colt revolver action (Pre-Mk III/IV/V/King Cobra/Anaconda) is tricky and there aren't that many gunsmiths left anymore who know how to work on the action. I would recommend a Colt for collecting, but a Smith or Ruger for real world. Be careful of Taurus. The company has come a long way, but I still have doubts about the quality control. And that's not good for a revolver being used for the real world. Life or death in other words. --Jcordell 23:46, 9 October 2010 (UTC)
Sorry about adding this to your main page. I was working on it and I was also talking to my kids and dealing with the family pets (no not the kids). Guess I got distracted. Anyway glad to help. Also in all fairness to Taurus I am thinking of buying a Judge just as a "neat" revolver. Oh and that reminds me of something else. Somebody asked me about Charter Arms a few days ago. I would put that company in the same category as Taurus. It's come a long ways, but I'm still not sure about the consistency of it's Quality Control.Anyway talk to you later.--Jcordell 12:53, 10 October 2010 (UTC)
I think the mid size snubbies are great revolvers.I own a Colt Mk III Lawman with a 2" barrel. It'a a real Bulldog. They also look cool as hell. But they aren't really designed to be concealed. I know there are people who make them work, but I think they're more belt or shoulder holster revolvers. I suppose if you wear a sports coat all the time it would work, but that's not me. My dad carried a Model 19 snubbie for a few years back in the 70's and he described it as heavy after a few hours and dense. He said that he was always worried about it printing. --Jcordell 17:52, 10 October 2010 (UTC)
Glad to help. The 642 is a good revolver. You might want to get Snap Caps so you can practice your dry firing without worrying about breaking your firing pin.I like them even with frame mounted firing pin designs like Ruger. Also you can practice loading. I use tem in all my firearms. Handguns, rifles and shotguns. I tell all our new officers to do dry-firing at least a couple times a week. It's helped me over the years. --Jcordell 18:41, 11 October 2010 (UTC)
Pred's revolvers
Congrats on your CCP, Pred, and sounds like a good choice going with the 442(?) Smith. Sounds good man, hope you enjoy it. StanTheMan 01:46, 17 October 2010 (UTC)
An added feature! Well, not really. But hey, if it works. Sounds like you didn't pay too many pretty pennies for it at least. Speaking of Smiths, tell me, what's your experience with that 'bling-bling' 586 you got? Have you fired it recently? StanTheMan 02:00, 17 October 2010 (UTC)
- Cool, glad to know a bit. It is a full-size revolver so I'd expect it to have some weight, especially since it's bigger than K-frame. Anyway, thanks for the bit of knowledge, man. StanTheMan 03:48, 17 October 2010 (UTC)
banning user 125.233.23.5
His nowiki command was not necessarily vandalism. I've seen that mistake with noobs who know nothing of Wiki command structures. I wouldn't do a permanent ban, unless he has done something else wrong. mpm
Temporarily ban him again
But clearly tell why you are banning again. If he does it a fourth time, then permanently ban him. We can't have guys doing obviously stupid things and ignoring the mods. It MAY make IMFDB more 'nazi like' like some disaffected ex-members have accused us of, but seriously, the mods (and quality good members) waste so much time correcting inane and just dumb changes made by noobs. MoviePropMaster2008 01:17, 17 October 2010 (UTC)
Bah, why do people even do that? It should be obvious what the end result will be. Well I don't know. People who act like that have always just irked the living hell out of me. I mean.. that's just irritating. And I'm not one of the poor souls.. err wonderful guys who handle those things. StanTheMan 01:24, 17 October 2010 (UTC)
RE: uploading images
I only edit it again so it appears in the screenshot category. Does it still appear in the category if you put the category part in the summary section? - Kenny99 00:42, 19 October 2010 (UTC)
I think I will have to withdraw the Stevens 67
I just checked the fine print on the side of the gun. It's a Savage/Springfield Model 67, not a Savage/Stevens Model 67. I 'think' the Model 67 is virtually identical save for a few differences (the ribs in the forearm is a wee bit wider). What do you think? Keep it or trash it? The problem is that Stevens also has a Model 77 which looks the same. Arghhh. These gun manufacturers and their third party branding of the same damned gun just drives me nuts! :) MoviePropMaster2008 17:30, 20 October 2010 (UTC)
Wacko watch part deux
1morey -
I'm afraid the guy's uploaded a shitload of redundant and jacked images (one of them has the copyright posted on the image itself), and his Call of juarez page is.. well, look for yourself. I try to not be that judgmental but, sheesh.. :( I'd fix the page but I don't wanna encroach on admin-type stuff. Besides it's a clear showing of how NOT to do a page.. ahem sorry. I just can't stand pages done that horribly. Saddest thing is that it seems the game pages are the ones most like that.. bah. StanTheMan 23:13, 24 October 2010 (UTC)
- That's cool. I know he's a new guy so I tried to keep that in mind, still that wasn't too pleasant to see. The page looks much better now so thanks on that. I'm gonna add the proper gun images and links, and do a bit of formatting. I'd like to get your ok to move the non-firearm weapons (Bible, Tomahawk, etc) to the talk page. StanTheMan 02:05, 25 October 2010 (UTC)
95.116.165.233 All for you, unless someone else gets him, of course. And remember - PENIS! :P StanTheMan 16:25, 29 October 2010 (UTC)
School Rumble
has anyone added a page on school Rumble, i was adding a page about Sora no woto, i forgot that it's already on here. so just before i try. is there anything about that anime on this website
School Rumble
has anyone added a page on school Rumble, i was adding a page about Sora no woto, i forgot that it's already on here. so just before i try. is there anything about that anime on this website
school rumble
i have tried its japanese name Sukūru Ramburu still noting has come up, so im wandering if i could make a page
im new to editing these pages its just the pics i have trouble with
my page is still unfinished, when you look at it you can see what the problem is, sorry im still new to making pages like this. just need to know how to get those images right with the text
school rumble
its just the cover of the anime that im stuck with now, sorry i must be bothering you now
i guess its fine.
Thanks for the help :)
im still stumped on what gun Oji kurasuma has i dunno what it is. but i guess someone who does know will change it.
my dad took my laptop off me yesterday so, sorry if i was unresponsive. i was going to make the changes. but thanks anyway, you've been a real help :)
RE: gun discussions
Sorry for not getting back to you sooner...I have no problem with allowing some discussions of guns, as long as they don't deviate too much from the scope of the site. I mostly just hate people using the talk pages for the kind of discussions we saw on the Beretta 92 page, because I think that kind of stuff makes us look bad. Also, some of those topics on the 1911 page look to me like they were started by an anonymous user who seems to be a bit of a poser (I remember he started a topic on the M16 page where he said he liked M16A1s better than A2s because you can "spray" with an M16A1, LOL). -MT2008 12:48, 26 October 2010 (UTC)
Photos
Thanks for watching my back. Actually it's pretty easy to revert those pics, but I'll start protecting them, but there are almost 700 custom pics I've uploaded ;) yeow. We can do them when we get to them. What is this guy thinking? A high resolution shot of a gun that's already IN motion picture armorer inventory? That makes it a little more site relevant than some snapshot of some dude's private property gun in his back yard. :) MoviePropMaster2008
Raw Deal
Well, I usually put 'screen used' on the caption if it is indeed a screen used gun. That's a build up. As you can see, the choke is slightly different. That was taken from a Browning Field shotgun and 'crammed' onto the Mossberg LOL! Also the original movie Mossberg was a different finish than mine. And also the original gun was lost or destroyed sometime in 1990 on another movie set so it is no longer (from what an armorer friend told me) but that was yet another off hand comment, second hand, so I can't verify it. Either way, that gun was just like the Hollowpoint Type 84S or the Dawn of the Dead Remington 870. Built up by MoviePropMaster2008 for imfdb using the parts (which I have) :) MoviePropMaster2008
Mac-uzi?
Are you kidding? For one, that gun is hella gay. Two, those parts were made back in the 1970s from scratch when armorers had trouble getting Uzis (the early 70s the Uzi was hot, Presidential security, the Raid on Entebbe, the gun was all in the news). Why would I have 35 year old fake gun parts that aren't even correct and were custom made in a metal fabrication shop to fit a MAC-10? :D So I guess the answer is HELL NO. No gay fake franken guns here! LOL!!!!!! MoviePropMaster2008
J.C. Higgins Model 20
I added alittle more about the history of the shotgun. Manufactured by High Standard under contract for Sears etc. Basically it's a no-frills version of the High Standard Flite King Shotgun Series. But it is a seperate model and should have it's own page. --Jcordell 17:31, 16 November 2010 (UTC)
This is a memory I've brought up before, but I remember going into a K-Mart probably thirty-five years ago with my dad and walking out (dad & I) with a Ruger New Model Blackhawk in .357 magnum. What's amazing is here in my town there is a drugstore (yes an old fashioned drugstore with an honest to go lunch counter) that sells both handguns and long-guns as well as ammo, fishing equipment and so on. A few years ago I purchased a Ruger Blackhawk from them just to help support a local business. Going into that store is like walking through a time-warp. There are still a few left I guess. --Jcordell 18:26, 16 November 2010 (UTC)
Redirect
Okay. thanks. I'll do that. --Jcordell 03:22, 24 November 2010 (UTC)
RE:
Definitely a spammer. Nuked. -MT2008 14:25, 24 November 2010 (UTC)
Armstrong images
Hello and sorry for the no neccessary images, you can delete them. I will respect next time. --comateman 22:34, 27 November 2010 (UTC)
RE: Auction
Yeah, I remember that auction. Obviously, the info in the PDF is not going to be 100% (as evidenced by the example you cited). Inaccuracies are likely to be a result of the fact that whoever wrote that document wasn't knowledgeable about firearms. But it could still help us. -MT2008 05:17, 28 November 2010 (UTC)
It's definitely possible the barrels were swapped out for a later movie, though I can't imagine which one. Also, as far as the Glock in Eraser being a G21, it's possible, but it's also a bit strange to me because the opening credits scene shows a Glock 17 being loaded (the mags aren't long enough to be G21 mags). Though of course, the opening credits gun wasn't necessarily the gun used by Arnie in the rest of the movie. -MT2008 16:11, 28 November 2010 (UTC)
Zombie Killer 1995
Thanks for deleting the friends page but I have redone the page thanks any way
Zombie killer 1995
Ok thanks I'll remember that
zombie killer 1995
sorry sorry I'm new to this thing my bad if I reset the picture size to say 450px would that be ok?
RE: The Way of The Gun
Comin' right up! :) And thanks. I was a bit hesitant at first about uploading my screencaps... --Warejaws 21:00, 30 November 2010 (UTC)
Ah ok, and once again: thanks! And yes, this is gonna look awesome as a Featured Article... ;) I'll just finish it up and maybe add a couple of them situational shots. --Warejaws 21:12, 30 November 2010 (UTC)
RE: M1911A1 disclaimer
Sure, I think that would a good disclaimer to add. I also wonder if we should add the info about how most firing 1911s in movies are 9mm derivatives (like the Mark IV Series 70 or Star Model B). But this has been a big problem. -MT2008 04:08, 3 December 2010 (UTC)
The Mark IV Series 70 in 9mm while it was available they aren't all that common, I very rarely see them come up for sale. (maybe the armories bought them all).
You'd have to ask one of our armorers about this, but I would guess that could very well be true! Also, because movie guns always get sent out on lots of shows, it's possible for them to be disproportionately represented in Hollywood compared to real life (I've seen too many movies and TV shows that have had bad guys using the SIG P220 and P226 Sport models, which are pretty rare and hard to find.)
And yes, it's possible to re-chamber a .45-caliber 1911 to fire 9mm blanks. It's also not uncommon for gunsmiths to re-chamber weapons to fire more commonly available cartridges (i.e. re-chambering Japanese Arisaka rifles to shoot .30-.06 blanks). I have no idea how common this is with 1911s, though. The impression I've usually been under is that .45 ACP 1911s were used mostly for non-firing, the 9mm Star Model B or Mark IV Series 70 were used in firing. I dunno when gunsmiths in the industry started figuring out how to make 1911s function more reliably with .45 ACP blanks, but I'm guessing it wasn't until some time in the 1980s or 1990s, which would explain why 9mm pistols were still more common than other calibers up until recently. -MT2008 05:01, 3 December 2010 (UTC)
In early gangster films you see Colt 1911's that were not converted to blanks but were still live fire weapons. The 1911's and 1911a1 are a delayed blow back weapon and were more difficult to convert than the straight blow back pistol like the Colt 1903 Pocket Hammerless. Also the .45 ACP blanks were made from a cut down .30-06 cartridge and were mainly used in the Colt Thompson Submachine Guns but the 1911 had some issues due to the hard rifle primers. So you will see most 1911 and 1911A1's used in film prior to 1950 firing one shot since they were not converted to blanks or a mock up 1911 that has a small revolver inside an aluminum shroud to stand in for a 1911 when firing multiple rounds. About 1950 the Star Model B was brought in to the US for sale and several studios and armories purchased these since 9mm blanks worked and a conversion on a delayed blow back weapon was developed. From 1950 through the mid 80's the Star Model B, Colt 9mm and Colt .38 Supers with a 9mm barrel were used. About 1985 a new .45 blank cartridge was developed that used a large pistol primer allowing the armories to activate there 1911's to fire reliably. The Stembridge had both Colt 1911 and GI 1911A1 in there inventory also had Colt 9mm Series 70. They did try to convert 45's to 9mm but had problems due to the larger breach face in the 45 slide compared to the 9mm slide. The rentals of 9mm 1911 pistol have slowed down when the .45 came on line but they still go out on shows when a Propmaster wants to limit the amount of different blanks on set. Hope this helps some it will be hard to decipher pistol types unless you study the photos closely. --phoenixent 23:36, 5 December 2010 (UTC)
The machine pistol used on Public Enemies was originally a 38 Super converted to 9mm. It's a funny thing with those machine pistols that the original ones built for Dillinger in the 30's were 38 super. I have seen Barstow barrels in 9mm plugged and modified for blanks in Stembridge parts bin so that gives some credence to converting 38 Supers to 9mm blank. Also Stembridge had great connections at Colt and they would build custom pistol in 9mm for Stembridge. The pistols used in Cobra were 38 Super National Match made in 9mm by Colt for Stembridge.--phoenixent 04:21, 6 December 2010 (UTC)
That photo from Cobra is nice as it shows the ejection port. Colt made that pistol in 45 ACP and 38 Super only but they did build it special order in 9mm for Stembridge according to Syd Stembridge. The firearms companies do a lot of special builds if the time allows for it. Ellis Mercantile had new S&W Highway Patrolman revolvers built by Smith & Wesson for A Perfect World. They sent S&W an original from inventory and then S&W built them almost exactly like the sample. --phoenixent 17:14, 6 December 2010 (UTC)
This is really great information! Thanks so much, Steve! Hey Predator, should we add this summary (or something like it) to the page? -MT2008 01:49, 7 December 2010 (UTC)
Sounds good! Only thing is, don't use any personal pronouns ("you"). I gotta run, but I'll discuss further in a bit. -MT2008 03:21, 7 December 2010 (UTC)
I had a 38 Super National Match with Elison rear sight in 1981 that came back from Mexico. The pistol came from a batch of guns imported by Odin International. As for the Cobra pistols Colt built them special in 9mm for Stembridge. That would be easy for Colt to do as the just run a couple of unfinished National Match slides though the 9mm machine operations for the firing pin hole, Extractor Hole, Ejector Slot and Breach Face. It is a lot easier for the manufacturer to do those for us than trying to do it in house. We also have Glocks that are marked Glock 23 but are in 9mm blank again it another special build by Glock for one of the armories. You are correct on Clint's revolver in A Perfect World as a Model 19. But they ordered the Model 28's for the show I am not sure who used them in the show just knew they were ordered and they went out on the show.--phoenixent 17:43, 7 December 2010 (UTC)
On the Glock 23 in 9mm some scripts call specifically for the Glock 23 since that is what the FBI use at this time. But to make things easier for the armorer or propmaster we had them made in 9mm instead of 40 cal. There are 40 cal Glocks in other armories as I have used them on some films but it would have been easier if it was 9mm as we had other 9mm pistols on the show. No problem on using what I told you about 45 blanks and I can get more info to fill it out for you. I will be talking to the guys about a new category for IMFDB on studios and armories of the past that should include a page on motion picture blanks. It depends on what the conversion was on the revolver. I have seen several from back in the early days with the cylinder bored or shaved for 5 in 1 blanks. Also we have some revolvers the have the barrels plugged and ported in different directions for close up use. It's very rare now a days for a revolver to be modified due to caliber as we have access to almost all calibers of brass. But we do still modify the barrels for the close in shots but usually on a spare barrel. The industry looks at it's guns as just props to assist in make a film so we due think that would make collectors cry like the 1st gen Colt Single Action with the bent barrel in the movie Unforgiven. The gunsmith was told to use one of the single actions on the rack so he did what was told. --phoenixent 17:33, 9 December 2010 (UTC)
Zombie Killer 1995
Hi could you tell me how to delete pages thanks.
Zombie Killer 1995
Ok thanks the the info.
Zombie Killer 1995
Hi just one question is it possible to put a block on a page so that only the creator of that page can edit it. or some way to that people can only edit with creators permission?.
Zombie Killer 1995
Hi, I looked on one of my pages I created Doghouse also with Phoenix Nights and it says that the page is incomplete but it is there is only one gun used in it so should I just get rid of the ?.
J.C. Higgins Shotguns
How about we rename the page "J.C. Higgins Shotgun Series"? I think that would work. --Jcordell 01:05, 11 December 2010 (UTC)
Sure thing. That would simplify things. I finally discovered the identity of the Model 21 because I bought the 1965 edition of Gun Digest at a used bookstore today. Mainly because I thought it might help with identifying older more obscure firearms (which it did) plus I like reading old gun articles from the past forty-seventy years. You'd be suprised how much info they have in them - even in 2010. Plus the old writers weren't so focused on everything being high tech and uber tactical. --Jcordell 01:10, 11 December 2010 (UTC)
The 65 edition I picked up has several interesting articles. One is about the brand new 41 magnum. Another is about the endof the M14 and looks at the possible replacements to include the AR-15 and finally an article about the changes introduced by Winchester to the Model 70. The crazy thing is the writer approved of the changes! Boy if he been able to see into the future and the big stink that people would make about Pre-64 vs. Post 64 Model 70's. --Jcordell 01:12, 12 December 2010 (UTC)
Zombie Killer 1995
Hi just needed to ask recently I have seen annoying advertisements on the right and left side of this website trying to sell things is it possible for them to be disabled.
Thank you for listening to me hope to hear from you soon.
RE: From Dusk Till Dawn
This is becoming a habit ;) How do you like the new shots? I'm gonna update the whole page with some better caps of all the shotguns too... And damn, couldn't have imagined that Tarantino's 1911 was a china-copy. I could have sworn it was a Springfield. Oh, well... --Warejaws 00:08, 30 December 2010 (UTC)
Ok, thanks. Hmm, funny coincidence with Tarantino and the 1911. One can't help but wonder if it's a conscious choice... Anyways, back here in Finland, it's like UK or New York for us "gun-nuts". Not a lot of people do ,for example, gun-related sports (well, other than hunting I guess) in here, especially young people. It's a tough nut getting a firearm. And if you are into guns/or have a gun (other than basic hunting rifles/shotguns) people thinks you're nuts :D (I had a point here somewhere, I think...) Anyways, when there's not a lot of people into guns, there ain't a lot of guns either. So if you wanna have a 1911 -type pistol, Norinco is the most easily acquirable, and more importantly, cheap. And I've heard a lot of people bad-mouthing the piece. As for myself, I don't like to judge anything if I haven't tried it myself. (<-applies for guns, not people :P) --Warejaws 00:40, 30 December 2010 (UTC)
Yeah, we don't got a lot to choose from. I mean when you walk into a gun store in Finland... hmm, I don't think we even have other than a few gun shops in the whole country! Well, when you walk into a gun shop, or a hunting store, you got dozens of shotguns (O/U, pump-action, you name it), hunting rifles (Lot's of Finnish Sakos and Tikkas, then lots of others), and your .22s. I mean every place you go you have dozens of .22s, some basic every-guy-knows-them-guns (92FS, P226, etc.), and only a few others. I mean of course they can get them, but they're more... "special". If you ask for e.g. a Springfield 1911 TRP, they're gonna have to import it from somewhere. I've heard some people get the Norinco, and use it as a basis for something they wanna build. In here Norinco's are about 400€, give or take. Less if they're used. --Warejaws 01:28, 30 December 2010 (UTC)
P226 pic
Thanks for pointing that out about the pic. I've notified the user. --Ben41 13:41, 1 January 2011 (UTC)
RE: PNGs
Shit I forgot. Been away too long. Thanks for the reminder. --ManiacallyChallenged
RE:
Huh? That's odd...it looks centered to me. -MT2008 16:59, 6 January 2011 (UTC)
I'm a little confused. Here's what the alphabet list at the top looks like for me:
Is that what you're referring to? Also, I haven't emailed/Gchated Chris yet, should I? -MT2008 17:24, 6 January 2011 (UTC)
Yeah, I usually see the ads, but sometimes, they don't load properly and then I don't. -MT2008 17:26, 6 January 2011 (UTC)
Done, good suggestion. Ads are gone, although the menu is still on the left. -MT2008 17:34, 6 January 2011 (UTC)
Hi, delete request
Hi.I heard you were an admin. I did a little upgradin' on the Ninja Assassin page. I upgraded some pictures, and I took out some of the crappier ones. Could you possibly delete these, please?--Warejaws 19:48, 8 January 2011 (UTC)
Okay, gotcha. Thanks. --Warejaws 20:06, 8 January 2011 (UTC)
RE: AK
First of all, I just viewed the auction, and it says someone bought it. Are you that someone? If not, this discussion is (sadly) moot.
Second, yes, $1K for a PT Legend is a really good deal. I paid about $950 for mine (in 2004), but mine is a stamped receiver, not milled. Milled receiver AKs are always more expensive. However, I'm personally a lot more partial to stamped; they're lighter and feel a lot less...antique, I guess.
As far as other brands: Norincos are pretty good, but their fit and finish isn't as good as PTs. In the 1980s, they were considered the bargain-price "no frills" AKs (they often sold for $300, which is crazy considering what they cost today). They're also built to almost the same specs as the PLA-issue Type 56 rifles, so if you want something identical to what Hamas militants or Iranian Revolutionary Guards carry, the Norincos are cheaper and closer to mil-spec.
Hungarians are my second-favorite after the PTs. I've handled an SA85M and it was quite possibly the most beautiful AK I've ever seen. Unfortunately, the FFL wanted $2,500 for it, and from what I've seen, it's hard to find one for under $2K because only about 7,000 were imported to this country before Bush, Sr. banned them in 1989. Right now, there are some manufacturers who are building SA85Ms by taking Hungarian parts kits and putting them on American-made receivers; I haven't seen one firsthand, but I would be suspicious of anything made in this country. American companies are never going to be as good at making AKs as their counterparts in Eastern Europe or East Asia, IMO.
Sorry, I phrased that poorly. My gun isn't a Legend (Legends are milled receivers only). Mine says "AK47S" on the side of the receiver, and it was imported by Golden State Arms, which was one of Poly Tech's front companies in California. -MT2008 02:37, 15 January 2011 (UTC)
Re: I'm Gonna Git You Sucka
This time I mentioned that it's a Type 56-1 with an AKM-style muzzle break. Hopefully, that'll clear things up. Also, at some point, I gotta talk to Ben about his IDs - he gets stuff wrong all the time (usually minor things, though, like specific Glock variants/generations). -MT2008 17:11, 26 January 2011 (UTC)
Archer page
I agree that the weapons are drawn well enough to be identified. I wouldn't have any trouble with it, but it may be better to run it by the other mods and then probably a disclaimer should be put at the top of its page to explain why this page is okay. --Ben41 06:28, 31 January 2011 (UTC)
Stargate SG-1
I just started with Season 10, so I am not really done with the page yet. In the meantime you could put splitting the page up for vote. See if people think it's a good idea or not. --Milkovich 07:31, 31 January 2011 (UTC)
I was wondering who will split the page up. --Milkovich 12:45, 1 February 2011 (UTC)
I am already putting the Seasons into separate .txt files (anything else and the formatting goes haywire). I have 1 through 6 done. Until I am done with that I will keep on adding screenshots to the SG-1 talkpage. --Milkovich 15:20, 1 February 2011 (UTC)
Done. I apologize for not warning anyone beforehand. The pages probably need a lot of fixing. --Milkovich 17:48, 1 February 2011 (UTC)
Splitting Up by Season
It would be nice to split those shows by season, but I've found that both those shows as well as NCIS are pretty much the same each season so there would be a lot of overlap of weapons used. 24 was different because each season was pretty much a different story. Miami Vice had a lot of different weapons each season. Splitting Burn Notice and The Unit would mean having to go back and examine each episode of each season to reexamine which weapons went with each season. In other words, I would vote not to split. (Stargate's another matter). --Ben41 01:24, 1 February 2011 (UTC)
Black Hawk Down pics
Just wondering why you wrote over my pics for Black Hawk. Mine are from the Blu-ray. --Ben41 07:39, 8 February 2011 (UTC)
Thanks, I'll be more careful next time. --Ben41 02:50, 9 February 2011 (UTC)
Deleting files
How do I delete a file if I upload the wrong one?
Not trying to be a pain but I'm still new to your site.
Thanks- Peejn8r
Zombie killer 1995
Hi I was wondering if you could confirm for me what the name of the pistol is.
Is it a M1911A1 or a Beretta 9000?
Do you know the name of the pistols is it a Colt Officer's ACP but in black and i dont no why i coverd their faces
thanks for the help I thinks its a Colt Officer's ACP
images
Sorry I haven't responded sooner. BTW, you're doing an EXCELLENT job as mod. I see you kicking ass and taking names when it comes to banning spammers and keeping error prone 'drive by anonymous members' in check. I'm taking a break from photos for iMFDB. the problem is that members LOVE the pics, but too many members feel that I'm being some sort of jerk in trying to protect the images from piracy by other websites. IP (intellectual property) seems to be a foreign concept to most of the membership on IMFDB. We're legal on the screencaps, I know that much. But I put a ton of work into gun images and recently some of the arguements (on and OFF the forums/discussion pages) have left a bad taste in my mouth. So officially I'm on strike for now. No more pics. :) MoviePropMaster2008 21:44, 19 February 2011 (UTC)
Trivia template
I wanted to see how it would look on the main page first and just waiting for an okay from some of the other mods before putting it up for a longer trial period. --Ben41 02:04, 20 February 2011 (UTC)
RE: Killshot 1911s
Holy crap, I think you're right! When I saw the film the first time, I spotted the gun as a Series 80, peace of cake. I didn't care to think anymore, since I had already recognized it. I couldn't have even thought it to be not only 2, but maybe 3 different guns.
The second screencap looks like an M1911A1, as you already noticed. The third might as well be a Norinco, I mean they even used plastic shotguns for some scenes. I'll have to watch the film again to see if it changes even more. Thanks for spotting that, I appreciate it :) And thanks for the compliments --Warejaws 00:57, 28 February 2011 (UTC)
Re: Killshot
Now that you mentioned, the Smith looks like a possible alternative. Btw, the film was full of continuity errors and such. A real nightmare. It didn't help production that they had to cut and re-shoot the movie several times.
But about the shotgun, I'ma wing it and say that it is a Winchester Model 1300, even though I don't know if they make it with a full synthetic stock with a regular mag tube. But the foregrip reminds me of the 1300 Defender...
OH...I get it. Piss Taker...Thanks Excalibur01 20:12, 3 March 2011 (UTC)
RE:
I think you're correct, good catch! Still wish we could ID the other shotgun, though (the one with the long tube).
Also, as far as the Type 56 section goes: I think it's fine to add a note that they were originally made with milled receivers. -MT2008 08:06, 9 March 2011 (MSK)
Yeah, I think it's a Hatsan. Also, I don't know if the tube is unsupported; I think it's just that the connector blends with the suit of the agent in the background. Also, I'm pretty sure that same shotgun appears later in the movie, and it definitely doesn't have an unsupported tube. -MT2008 08:23, 9 March 2011 (MSK)
Recreated
Hi. I have recreated a page for a game which was once deleted (don't know the reason...). Could you please take a look at this page: Condemned: Criminal Origins. bozitojugg3rn4ut 09:00, 19 March 2011 (CDT)
Bruni 92
Bruni 92
Hi there, since you're the registered user for the Beretta 92 page, could you please add the below table for the Bruni 92? I coded already for you so it's probably a matter of cut-and-paste.
Also, I found a good quality image of the Bruni 92 (Media:Bruni_92.jpg) that you may want to include, currently there's none.--PeeWee055 10:32, 26 March 2011 (CDT)
RE:
Thanks for trying. I literally just took the image again (played the movie) and re-uploaded, and still no go. I think the file itself is just going to need to be deleted. I have no idea what could possibly be causing this error. -MT2008 21:39, 7 April 2011 (CDT)
Yeah, I saw! It's good that we have him on here, too. I figured those weird AKs were modified R5s, but it's nice to have confirmation. -MT2008 21:35, 12 April 2011 (CDT)
RE: Dark Blue
Thanks, I think the page is coming along great, too. Oh, and I did some re-organizing on the handguns, as you adviced, so that the main characters' pieces are the first ones you see on the page. I also put the unknown 1911 on the colt government section. Check it out, now it looks even better ;)
I'm also planning on screencapping the second season in the upcoming weeks, as soon as I'm done with the first season and a couple of other projects I'm planning. Cheers, mate --Warejaws 02:30, 15 April 2011 (CDT)
Just to point out since I can't post on the forums (don't have permission):
Burt's argument is basically that "RPG" is not the correct term to use to describe an RPG; I've shown him links to BAE Systems and the US Army using the term to describe a class of weapons, but he insists they're incorrect as if he's somehow in a position to overrule experts in the defence industry and the military on what the correct term is. This is why he wants to remove "RPG" from all mentions of the Type 69; he thinks it can only be applied to the RPG-X series of weapons, not to RPG weapons in general or their warheads. Given he's seemingly immune to logic, fixated on "correcting" things that aren't wrong, doesn't contribute anything of merit and edits the same articles in the same way, I'm fairly sure he's actually good old PersonOfInterest; this probably explains why he's trying to describe me as a "troublemaker" (I haven't caused anything resembling trouble in years, last I checked; "good contributor" is probably a better label) since I disagreed with him before. Evil Tim 02:48, 15 April 2011 (CDT)
Further to that, here's something fun: PersonOfInterest's last activity is 26th August 2010. He made a new account and came back (and got banned again) just under a month later on September 28th. Burt's first edit is a month and four days later and he's soon back to editing Goldeneye and the N64 The World Is Not Enough, which were POI's weird little obsessions. He also has that POI quirk of often taking two tries to sign talk page edits, if he bothers to sign them at all (look for places where he edits a talk page twice in a row, including his first two edits). Interesting, huh? Another little thing: the user who posted the top comment was PersonOfInterest. How come "both" of them think this is the right way to say things on a talk page? Evil Tim 08:49, 15 April 2011 (CDT)
Well, people seem to be seeing through his rather ridiculous attempts at character assassination on the forums (yeah, I'm a disruptive user, damn me for posting over a hundred screencaps in the last five days while he's never posted a single one ever). It's basically common sense: if the experts say something and a random person on the internet says something else, the experts are going to be the ones in the right. Anyway, I've copy-pasted the POI stuff to MT2008, so we'll see what he makes of it. Any idea why I can't post on the forums? I registered a new account name (Evil Tim) since I can't get a password reminder for "Vangelis," but that says I don't have permission to post. Evil Tim 09:20, 15 April 2011 (CDT)
Yeah, it's my Hotmail account, though I was cleared for forums on my other account (Gmail) just fine. One of those things, I guess. Anyway, time for me to hit the hay. Have a good one. Evil Tim 10:56, 15 April 2011 (CDT)
Hey, I realise this is kinda dead, but while looking through the abbreviation list I noticed something: Burt said of RPG "we don't use that term on this site." Guess who decided that? Evil Tim 09:50, 22 April 2011 (CDT)
RE: Feast
Now that you mentioned it, it seem like the shotgun used in Feast definitely changes during the film. The trigger guard looks like it's from a Winchester, but the pins resemble Remington. Damn, I guess I'm gonna have to watch it again, to get a good look at it. It's been a couple of years since I saw the film, and just recently I upgraded the pics used on the page to .jpgs. It was one of my first pages, so I wasn't familiar with how the site works, and I initially uploaded them as .pngs. The .pngs are still here somewhere, I couldn't write them over with my .jpegs. I guess they can still be deleted, though? --Warejaws 14:24, 19 April 2011 (CDT)
Hmm. Time to put Google to use ;) I'll see what I can dig up. Oh and I got you the .pngs, so you only have to delete them:
Hi, Predator. Long time, no see. Sorry that I'm only now contacting you about the Feast shotgun thing, but to be completely honest; I forgot. I was incredibly busy with work and school and such just the other day, but I just quit my job so now I have time for imfdb :). About the shotgun, I still dont't know what it could be. I tried to do a little Googling but I found nothing enlighting. My dad said that he had subscribed to a Finnish gun magazine when he was younger. So I went to my father's attic and found a stack of old Finnish gun magazines. One of them had a big shotgun comparison article. Still nothing, altough the article itself was very interesting. Coulde the shotgun in the film be like a chinese copy of the 870? Oh and I found a couple of screenshots I hadn't used for the page, I think I'll upload some of them to get some better images. Ps. Forgive me if I sound ditzy, I haven't slept for 27 hours... --Warejaws 20:41, 16 June 2011 (CDT)
Everybody hates chris
MPM had deleted this page and I had restored it for exactly the same reason you restored it, but I was left a message to keep it deleted. Just letting you know. --Ben41 19:11, 21 April 2011 (CDT)
Xm21 file
Predator could you completely delete the file as the file I'm trying to upload is the black and white file. It seems that whenever i try to upload the new file it apears to me as a coruption of POI's file wich is a missidentification of the weapon. by deleting all of the versions i can upload a fresh image without anything going wrong with the upload hopefully.Rockwolf66 22:19, 25 April 2011 (CDT)
Righteous Kill
Thanks for the corrections on Righteous Kill, I'm doing them now. --Ben41 21:26, 1 May 2011 (CDT)
Can we get RPG-7 unlocked now?
Orca's left the page locked as admin editing only, which seems a little counter-productive since it's a very common weapon and nobody can currently add examples to it's page. Evil Tim 07:51, 5 May 2011 (CDT)
Spaceart
I thought the consensus was that they were basically spam and bunni's take on it was "The outbound links need to be removed and the images (he) uploaded need to be off the main pages and on the discussion pages unless they are actual screen used props." I noticed they'd been removed from almost all the articles they were posted on, so just got rid of the rest since none of them were in the right place anyway (all above the main weapon image). Was that not right? Evil Tim 11:48, 5 May 2011 (CDT)
Well, the way I read it was that MPM was the only one for using the images and he changed his mind when bunni said it was spam. I'll move them to the talk pages right now. Evil Tim 12:10, 5 May 2011 (CDT)
Thank you
That was starting to get irritating. Evil Tim 09:01, 8 May 2011 (CDT)
Yeah, that'd be good. Could you also do that for Black and Homefront since they're both basically finished? They're more likely to be vandalised by anons than added to now. Evil Tim 09:14, 8 May 2011 (CDT)
Zombie Killer 1995
???? Will that help in any way, and what will that do.--Zombie Killer 1995 09:15, 8 May 2011 (CDT)
Ok then do what you can to protect my page please.
Hi friend, I replied to your comment on that movie which is apparantly so insulting it needs a special disclaimer. I'd like to know if I can edit the page still, and if the people running this site (I guess this includes you, as an admin) share the views and biases which enabled such a disclaimer to be put on that page.
Peace Tec-9 12:54, 3 June 2011 (CDT)
Sorry to interject on your talk page, Predator20 :) but I must reply to TEC 9.
Dear mister Tec-9, quoted below is one of your comments: "If the people who run this place feel that is an offense or breach to the rules of this wiki, then I'd be happy for them to ban me. It just proves this wiki is run by ignorant red-neck gun-lovers who lack the open-mindedness and moderateness to question the actions of their service members. " You IMMEDIATELY cop an attitude and insult the people on this site. If our biases are so egregious, you Mister Tec-9 are welcome to go elsewhere. The Mods of IMFDB have banned tons of guys who violate the rules. Having a foul attitude or elitist demeanor is not one of them. Don't parade your self important "I am non biased" BS and try to make changes that are inappropriate. Your comments already belie a pre-existing bias. You have a bias against gun "lovers", 'rednecks' and "Americans" or you wouldn't use the terms as an insult. You obviously don't care that unlike Casualties of War. the film Redacted came out in the middle of a conflict, stoking the fires of Anti-American hatred, giving a huge propaganda boot to the enemy, stoking anger and hatred when our men and women are out there risking their lives to fight terrorism. This arrogant insulting tome usually manifests itself when we encounter European or Foreign based IMFDB members. Now I don't know where you hail from, but your attitude immediately rubbed me the wrong way. :) best regards MPM2008
MPM2008: I replied to your points on the discussion page of that movie, and for all intents and purposes, I take back my use of the term 'Redneck'. I wont ruin Predator20's page, in writing my arguememt against your statement, so please check out that page. And I'd just like to add that they are not fighting terrorism - you used to be able to enjoy a nice cold beer an a bellydance at a decent hang-out in Baghdad before, now alcohol is banned and the government in Iraq is run by the Ayatollah Islamist scumbags in Iran, with Persians and terrorists crawling out of the woodwork everywhere. US soldiers have caused more suffering to innocent Iraqis than terrorists. Also, please feel free to reply back on my Wiki page for further discussion.
Take care. Tec-9 07:40, 4 June 2011 (CDT)
Predator20: Thanks again for the reply. I do completely agree, that the term "The members" should probably be changed to "Some members". However, a IMFDB lacks a comprehensive framework of just how many members need to be express insult at any particular film for it to have a disclaimer. Also, even if we say 'X-number of members need to express insult for a disclaimer', this will be open for abuse by people who'll herd in loads of new members just to get that disclaimer. And finally, IMFDB is a wiki to document movies - it should have no place for opinions - no matter how burning some members feel they are. This will keep it's credibility as an unbiased source for everyone as opposed to a politicied forum. Members can also always join the plethora of Right-Wing/Conservative NRA-type forums out there to express such opinions. I feel this is the first step of a very slippery slope in the politicisation of this place.
Peace bro. Tec-9 07:41, 4 June 2011 (CDT)
RE: .38 Supers
Yeah, I remember that talk with Steve as well. I can't remember for sure, but I think the gun from Public Enemies was a 9mm from the start (I've looked over the image of it though and can't tell). But he said that there are currently no registered .38 Super blank guns in Hollywood armories. Since someone on the Desperado page claimed the 1911 looked like a .38 Super, I corrected it because if today .38 Super blank guns are unheard of, it's highly improbable that one was used in a low-budget film from 1994. The only chance is if they were being supplied by an armorer in Mexico while filming there, since .38 Super is the largest military caliber permitted, giving it a higher chance of being used in place of a .45. Like you said though, it's very likely a 9mm Series 80, and not a Colt Super .38. - Gunmaster45
I stand corrected. I misremembered what he said I guess. Matt sent me the picture as well, it didn't click with me that the pre-series 70s weren't sold in 9mm. My bad. >.< - Gunmaster45
Re: The Big Bang
Thanks for the compliments. I just re-uploaded your screencap. Oh, and thanks for reminding me about the opening credits sequence. I remember that I first thought the gun was a series 70/series 80 as I had seen one in the film, but couldn't remember where. It was driving me nuts, so I just wrote it off as an M1911A1, hoping that someone would correct me, lol :). --Warejaws 07:03, 16 July 2011 (CDT)
Isn't there a rule about posting gun images of the firearms in-hand and using them on pages? Like it's not even allowed? StanTheMan 23:06, 16 July 2011 (CDT)
Didn't know it was actually a screenshot, and not just a gun image, that's fine. Still not correct to use it as a gun image though (Ben's since changed it on that MoH page so it's fine now). StanTheMan 16:43, 18 July 2011 (CDT)
This guy has done random censors (by using asterisks in the word) on a few pages now and frankly, I've become annoyed. User Evil Tim and myself talked to Ben41 about it but he did it again and I'm now wondering if's he purposely doing it solely to annoy users like myself. The rules state to keep swears to a minimum, not to censor them entirely, and also it relates to user comments and article descriptions, not movie quotes. I could be incorrect but that's simply how I interpret it. I've left him a message on his talk page and Ben's but I wanted to bring this to the attention of other Admins as well, because I'm seriously starting to consider it a problem. I've posted this to you and JCordell so far (in addition to Ben) but I think I'll stop and let you guys go from here. I really don't like even bothering multiple people like this but this seriously rubbed me the wrong way. StanTheMan 14:21, 17 July 2011 (CDT)
That's a good point, and I appreciate the reply. Frankly, I've always found censors to be silly, especially in regard to sites like this one (We're a site about guns, things that hurt and kill other living beings, and somebody's offended by a 'fuck' here and there?), but that's another matter. Point is, I'm not the one forcing the issue, this guy is, and I really feel he's not forcing an issue so much as being a annoying semi-vandal under the guise of eliminating bad words. StanTheMan 14:51, 17 July 2011 (CDT)
Wacko Watch strikes back
Special:Contributions/Daitravdyazen I believe the specific offense would be 'spamming links to external sites'. Of course you may not get em but hopefully somebody does soon.. StanTheMan 14:51, 18 July 2011 (CDT)
No prob, man. I actually had a little fun vandalizing him back.. I know I shouldn't have done it but.. bah. ;b StanTheMan 15:02, 18 July 2011 (CDT)
EDIT - On a secondary note, since it seems the whole site is going that way (though it doesn;t seem to help that much), mind protecting my user and talk pages? StanTheMan 15:03, 18 July 2011 (CDT) EDIT AGAIN - Thanks much.
RE:
I don't really care if that comment is removed. I only included it as a concession to all of the people who disagreed and insisted the gun might be a G23. Since that debate is long over, the comment can go. -MT2008 23:23, 31 July 2011 (CDT)
Vandalous newcomer in Battlefield 3 page
Hello.
I need to report a newcomer: Special:Contributions/Lukewilliams010 in Battlefield 3 page whose actions are of vandalous nature. He posts leaked (not official) material, keeping referring to it as the other way round, and swears on everyone who mentions this to him, particularly: [2][3][4][5]. And he doesn't sign his posts seemingly in attempt to hide his identity (which is of course impossible thanks to "View history" feature. --Masterius 16:40, 24 August 2011 (CDT)
Thanks.
Which currently present admin would you suggest to message about video game issue next time? I've tried to message Gunmaster45 a couple of days before but he seems to be absent. --Masterius 14:53, 25 August 2011 (CDT)
Understood and appreciated --Masterius 15:30, 25 August 2011 (CDT)
Remington 870
Sorry, I had found the image on the Rem 870 discussion page and didn't know it was from your page (that's why I made a new image and didn't overwrite the original). If you're photographing them again, it would be great if you could photograph both sides. Thanks! --Ben41 16:34, 25 August 2011 (CDT)
Yeah, your 870 is the only one on the site with wood furniture and the extended mag tube. I can do the "white out" part if you want and I'll make sure to give you the proper credit for taking the picture. --Ben41 16:47, 25 August 2011 (CDT)
Variations of guns missing in overview
Sorry to bother but there's a thing I hope you can help me out with.
A few months ago you were kind enough to add the Bruni 92 to the Beretta 92 page. Do you have any idea why this particular gun (and e.g. the Springfield Armory Omega which I added on the M1911A1 page yesterday), don't show up in overviews when you type their names? For instance, when I choose the search function on the left side of the screen, and go to 'B' for bruni, then there's no trace of the Bruni 92.
Aren't variations of guns like e.g. Beretta 92 and Colt M1911A1 supposed to show up in the search function and does one need to scroll down from the 'mother' model? In any way, look forward to have your opinion on this. Thanks a lot --PeeWee055 06:20, 27 August 2011 (CDT)
Thanks a lot for your comment on how to make redirects, works like crazy! Even though I have only created 3 movie pages, I like this site to be as complete as possible and I'd hate certain guns to be missing from the general overview. Also increases the risk that people create duplicate pages.
By the way, I checked your personal gunpage; WOW! My favourite is the Hi-Power with the Captains' rear sight, awesome! --PeeWee055 11:39, 28 August 2011 (CDT)
Thanks
Whew, I was wondering when one of you was going to jump in. Have fun deleting. --Funkychinaman 21:42, 2 September 2011 (CDT)
Nazi Fishwife
Hey Predator, thanks for getting rid of Nazi fishwife. I've been watching him for the past week now, and I sent him a message telling him to stop with his language and insults. I was hoping to get a response from him, but by his edits, he was just another troll, and I was probably going to block him eventually myself. Thanks, you do your job well.--Alienqueen11 13:29, 4 September 2011 (CDT)
Deleting a movie page
I was hoping you'd be able to tell me how to delete a movie page. Reason is I created a page for Leningrad but after I created the page, I noticed that the correct title should be Leningrad (Attack on). I copied all the coding to a newly created page for the correct title, but the empty page Leningrad still remains. Thanks if you can spare me a few minutes to let me know how I can correct this, --PeeWee055 09:16, 5 September 2011 (CDT)
MoviePropMaster2008 has already picked up this matter. I am in contact with him about this, but thanks anyway for your response, --PeeWee055 05:05, 6 September 2011 (CDT)
kasxjamil58
"Jamil" and that spammer's already gone by "Jamal" before. And his first edit is impersonating an admin... Evil Tim 16:14, 6 September 2011 (CDT)
JD0556
Hey Predator20, that vandal that's been abusing all those accounts came back under the username: JD0556, I think I may have talked some sense into him this time, so he might have stopped for good, but do you think you can't keep an eye on incase he does whenever I'm not around?--Alienqueen11 22:55, 8 September 2011 (CDT)
Thanks---Alienqueen11 13:54, 10 September 2011 (CDT)
Cut down Ted Williams
I have access to four (4) cut down Ted Williams Model 21 shotguns. If you want, I can check and see if there is a model that matches the look of the others, just let me know which films you want me to look at. I just grabbed one because of time constraints. :) MoviePropMaster2008 14:48, 10 September 2011 (CDT)
A little help...
Hello again. I just screencapped the page Hannibal Rising, and there's a heavy machine gun I do not recognize. At first I thought it was a DShK, but then again I'm not sure. Do you perhaps know what it is? --Warejaws 08:44, 12 September 2011 (CDT)
Nevermind, it seems that someone already ID'd it. But thanks for the suggestion, that's what I'd have gone if someone hadn't recognized it --Warejaws 12:49, 12 September 2011 (CDT)
WTF?
I wanted to add tens of download links (none not tested by myself and virus free), thought to try only a few times since I wasn't sure if it was allowed, why was I accused of "spamming" and IP banned?
That is the clearest shot of the front of the barrel, even though a bit shaky.
ps. Does this have something to do with the conversation on MPM's talk page? ;) --Warejaws 18:11, 12 September 2011 (CDT)
Ooh, sweet :P --Warejaws 18:21, 12 September 2011 (CDT)
Cut down Ted Williams
Crap. Just my luck. I'm presented with FOUR cut down Model 21s. I grab the one with the flush cut because at the time I think that's what IMFDB needs. I distinctly remember other shotguns with slightly longer barrels. Just great... :( Oh well. Let's call that a place holder until I get get a pic of the right gun! LOL. MoviePropMaster2008 23:51, 12 September 2011 (CDT)
Featured Article
That is weird. Not sure why it throws a blank one. If we keep adding movies I think it's less likely to throw a blank one... I'll have to check out the documentation to see why that happens. bunni 14:31, 13 September 2011 (CDT)
Hi Predator20! Delete the last "@@@" (right above the very last "<random>") and it will not show the blank page anymore. Now it thinks that there is an empty page after Heat, and puts that blank page to the rotation too. (I would do it but the page is locked.) - bozitojugg3rn4ut 15:10, 13 September 2011 (CDT)
Cbeattie
Well, he's back. And straight back to his old hobby of harassing Mr. Wolf over that "terror scoped rifle" he seems utterly obsessed with. Could you ban him again? Evil Tim 03:37, 20 September 2011 (CDT)
Take a look at Special:Contributions/Cbeattie or at User_talk:Mr._Wolf#Terror_Scoped_rifle_from_The_Saboteur. This kid constantly posts on this damn thing, just randomly trying to guess what this one fictional rifle in The Saboteur is. He's been warned by Alienqueen11 to knock it off (User_talk:Cbeattie#Hey) but the first thing he did when his ban expired was go straigh back to harassing the same user over the same issue; Mr. Wolf has repeatedly told him he's never played the game and doesn't care for this discussion. Evil Tim 11:48, 20 September 2011 (CDT)
Please tell me what is wrong with proving that the terror scoped rifle is real whitich it is util somebody can prove it is not real then the fact will not change. (Cbeattie 12:32, 20 September 2011 (CDT))
If it stays the ZH-29 then a will not edit it but if someone gets rid of that then i will Edit and they should get blocked for getting rid of false info. (Cbeattie 04:22, 21 September 2011 (CDT))
What have you done i am going to complain to the bosses of this about this outrage :( (Cbeattie 10:00, 21 September 2011 (CDT))
Automated notices after revisions/new comments on pages
Sorry to take your time but as a semi-novice on IMFDB, I would appreciate your expert input. I have created a number of pages already (movies, guns, actors...) and of course people have made changes to them, which is of course the fun of IMFDB. However, I only see these changes when I check 'my' pages manually and with the number of pages increasing by time, this is not ideal.
Would you have any suggestion as to how I could keep track of revisions/updates on pages that I originally created? This way I can see all comments, respond in a timely manner and learn from others. In an ideal situation, you'd have automated notices (like the ones generated for new posts on MyTalk pages) but maybe you are aware of other options. Thanks a bunch, --PeeWee055 07:40, 26 September 2011 (CDT)
Spammer + ones to watch
User:Nm7efSk94 is another spammer, and registered a couple of days back. I'd also kill User:Lcb63g9Yk as it was registered around the same time (and at the same time that "Aiai00125" was registered) and is the same pattern, username made with a password generator, I guess to stop us blocking common strings if it's just working from a list. User:Solow6s registered around the same time as that "CAllgood50" guy you dealt with the other night and seems to follow a theme (price being so low / all good). User:Raul00977 is the same name format as Aiai00125 (four letters with initial capital, five numbers with two leading zeroes). User:Tempfile is another worth watching; weird username, hasn't done anything at all after registering. Evil Tim 06:28, 28 September 2011 (CDT)
Also, kinda weird that Nm7efSk94's spam message didn't actually include any links. Botfail, I guess. I can't imagine Ford would hire a spam company to post PR material for the Focus. Evil Tim 06:40, 28 September 2011 (CDT)
New one: User:Curt923028. Four letters / initial capital again, but now new and improved with six totally random numbers. Evil Tim 09:45, 28 September 2011 (CDT)
Just to let you know. We have another incoming group of spammers that registered around the same time period: User:6qzWH3fiyS, User:Hws5i2iS3, and User:3f8WoqN8. They are using the same distinctive username format as the other users. - Kenny99 08:04, 29 September 2011 (CDT)
User:3f8WoqN8 was using an IP address from my ISP (Orange, a UK ISP), and I briefly ended up banned until I turned my router off and on again. Orange has an actual, proper TOU that it enforces; we should probably get Bunni to send the IP and access times to them and see if we can get rid of this guy for good. Evil Tim 06:44, 30 September 2011 (CDT)
Ok. Sadly I forgot to make a note of the banned IP, but we have action from him on 30/09/11 at 2:47 GMT, and he registered 29/09/11 at 06:19 GMT. According to the TOU you can't use the service "to send or procure the sending of any unsolicited advertising or promotional material" (18.1.4). This is the complaints procedure, which I think would apply to this. So all you need to do is pass this stuff and his IP to Bunni and see if he can make fireworks appear under this guy's ass. Evil Tim 07:06, 30 September 2011 (CDT)
This might be something to do with Bunni's new host, actually. I just looked up that IP: look at the whois information. It's somehow autoblocked one of CloudFlare's servers rather than what I thought (one of my ISP's addresses), which I imagine means it's just dinging random users who are served by it. So what I said above doesn't apply. Evil Tim 10:06, 30 September 2011 (CDT)
Re: another request
Yeah, I still have the DVD. I just don't know where it is yet, as I just recently moved into a new apartment. It's somewhere inside one of the six BIG trashbags that I used to move my DVDs and BLU-Rays here... :D I'll take a shot at finding it, as it on my 'to-do' -list to sort them out. I only kept a couple of DVDs/BLU-Rays at hand, as they're sort of top priority for me to do on IMFDB. Oh, and sorry for the late reply. --Warejaws 12:35, 10 October 2011 (CDT)
Here's the shot, finally. Got my DVDs all sorted out. But I don't know if that's any clearer than your shot. --Warejaws 03:03, 6 December 2011 (CST)
Funny thing
That "Richzgmjpe" guy you unbanned? Turned out it was a spambot. Not one thing it's another, huh? :D Evil Tim 01:45, 3 November 2011 (CDT)
Weapon Naming Question
Hello.
I wanted to inquire about one standard that is absent from Rules, Standards and Principles page. The weapon naming. If the weapon was called incorrectly in the first place, is it allowable for users to change it to correct one, provided they provide serious sources (that is, not some unsourced Wikipedian stub)?
An example of such weapon is SVU (incorrectly called 'SVU Dragunov', as I was explaining on the corresponding talk page. --Masterius 07:56, 13 November 2011 (CST)
Mythbusters
Hey man. Thanks for the help with the Mythbusters page. To answer your question, I'm trying to put them in Alphabetical order. Seemed to make the most sense to me... I'm just learning to use this site so bear with me.
Also I agree with you that the 1911 looks like a Colt Series 70. If you feel like it, go ahead and change it. The Colt Series 70 also needs to be added to the 1911 page.
Thanks again.
--Zackmann08 00:01, 3 December 2011 (CST)
Top Shot
I noticed that you seem to be the admin for the Top Shot page. I have been updating it over the past few days and it's started to get pretty full. With at least a 4th season on the way, should we maybe split the page up into a separate page for each season? I have a feeling people with a slower internet connection will have a hell of a time trying to open this page. Let me know your thoughts.
--Zackmann08 21:50, 5 December 2011 (CST)
I just had another user (User:Ben41) tell me that the non-guns had to be removed from the main page of each season of Top Shot... Since you're an admin i want to check with you regarding this. I really feel that they belong on the main page. They play a pivotal role in the show and are the focus of attention when in use. It also is for "completeness" sake. I don't want to only list 20 out of 24 weapons. In a movie, when you see a kid playing with a paintball gun for 10 seconds, I agree that THAT would not belong on the main page. Also, I feel that anyone unfamiliar with the sight who finds them selves here looking at the weapons will not know to check the discussion page (personally i never looked at a discussion page until I joined the site after using it for months to look things up). I found at least three other cases where this is NOT the way it is done. In Rambo (2008) for example, the machete and bow are included on the main page. Same with the Custom Torque Bow in Predator. Finally in The Punisher the compound bow is included. I would appreciate your input on this.--Zackmann08 15:52, 7 December 2011 (CST)
Since posting the above message I have learned that Ben41 is also an administrator and I made a few mistakes with my handling of his changes. I still disagree with the removal of the non-gun items from the main page however, particularly things like the canon and the crossbow both of which have presidents for being included on the main page.
I just feel that they play a big role in the show since an entire episode is devoted to them. But as you wish. Thanks for your input. --Zackmann08 18:22, 7 December 2011 (CST)
Renaming Pictures
On another subject, is there an easy way to rename a photo? I have uploaded a couple of pictures only to find out i thought they were the wrong gun. (For example uploaded a file called MB-SigP226.jpg that is actually a SIG P239.) Is there a simple way to rename the file? Thanks. --Zackmann08 18:29, 7 December 2011 (CST)
Oh well. Glad to know im not the only one. Thanks! --Zackmann08 18:47, 7 December 2011 (CST)
Occurance Listing
Question for you. I have noticed that some guns have a formatted table for listing their occurrences (M16) while others have a list (Smith & Wesson M&P). Which is the proper format? --Zackmann08 10:38, 8 December 2011 (CST)
Categories
Hey. I got another question for you. I noticed that some pages don't have the category listings (Handguns, Shotguns, Machineguns, etc.). Is there a rule of thumb for when to use or not to use the headings? Obviously if the movie has only 2 guns, or only handguns it isn't necessary. Just wondering. Thanx! --Zackmann08 10:52, 12 December 2011 (CST)
Good to know. I would have thought to just put everything in alphabetical order. I might try and do a movie or two. For the most part I'm just trying to get a better feel for the rules and the way things usually work here. --Zackmann08 11:18, 12 December 2011 (CST)
Sorry to bombard you with questions... Can you direct me to a good page to use as a template for a gun page? I want to make sure that the characteristics, specifications, etc. are in the proper order. I was trying to add the characteristics to the Smith & Wesson Model 460 but it seemed like all the S&W revolvers I looked at had a different layout. Thanks! --Zackmann08 15:50, 12 December 2011 (CST)
Sounds good. Thanks man. --Zackmann08 16:01, 12 December 2011 (CST)
G.I. Joe: Retaliation
The one Ben made has the title wrong which is why I missed it (misses out a period). Can you delete mine and move his one there. --commando552 09:09, 13 December 2011 (CST)
Sortable Tables
Hey man, I was using the 'Random Page' button and I Came across the page for Amitabh Bachchan which has a sortable table. Is there a reason we don't use these everywhere?! They are awesome and eliminate the need to make sure the entries are placed in chronological order. --Zackmann08 08:47, 16 December 2011 (CST)
The poster set-up is beyond cool. It looks very similar to the setup used on Wikipedia. We should definitely start doing that on here. (IMHO)
M1911
Yeah, I don't doubt that, but I'd rather leave it to MPM to make the changes himself if any changes need to be made. Also, regardless of whether our "friend" is right or wrong, he's so utterly obnoxious that we really don't need him around. Evil Tim 09:50, 22 December 2011 (CST)
Naw, no point. I handed him a month's ban for a nasty attitude and he's just coming back to post increasingly disjointed and useless rants on my talk page (apparently site policy is entirely my fault how dare I). Just infinite-ban him if he shows up again with new accounts, he's shown he has no desire to work with the people on this wiki. Evil Tim 09:57, 22 December 2011 (CST)
The part I left on is nit-picking. This is what I'm talking about when I say he doesn't belong here. That is not acceptable behaviour. Evil Tim 10:01, 22 December 2011 (CST)
That RIA 1911 needs the descriptions changing in every page that uses it, too. I'll have a crack at them tomorrow if you don't want to do that, but I'm off to bed now. Evil Tim 10:40, 22 December 2011 (CST)
Desperado 1911
The M1911A1 in Desperado is a Colt Mk IV series pistol. I just watched the film on blu-ray and noticed that this page didn't have the correct info.There's a brief scene in the film where the rollmarks aee visible. --Warejaws 15:25, 22 December 2011 (CST)
Gun Brand Page
Hey man, I posted something in the Main Page discussion (Here) that I would love your input on when you have time. Thanks! --Zackmann08 10:30, 23 December 2011 (CST)
haha! Yea the S&W page is gna take me days to do... O well. Happy holidays. --Zackmann08 23:44, 23 December 2011 (CST)
So I'm thinking about starting on the Smith & Wesson page tonight. Any word on whether these pages are gna stick around? I got some positive feedback from Bunni who said he wanted to add a new category for them. A few other admins seemed to like them but i wanted to see what the formal approval process was. --Zackmann08 15:39, 4 January 2012 (CST)
Gotcha. Thanks man! --Zackmann08 16:01, 4 January 2012 (CST)
M1911
Thanks for the RIA change. I've said before that I'm NOT an M1911 expert. There are guys who obsess over that gun and read every book on the subject. I'm just learning to recognize the details (got lots of weapons to remember after all, just recently had to teach another gun guy how to assemble the three types of Uzis - full size, mini and Micro). If the gun afficionados don't have a bad attitude, they can be a true asset to IMFDB. People can point out mistakes without exhibiting jerkish behavior. :) I'm just working my butt off trying to get good pics of movie weapons (under difficult circumstances). YOU can pretty much change or correct any description of my pics, if you know on good authority otherwise. :) I don't get all bent out of shape when trusted mods and members make corrections. I go by the tags, and sometimes the tags are wrong. People forget that these guns aren't in some public display where the ID tags have to be 100% verified. In fact many of these weapons are NEVER seen by the eyes of the general public, except in a movie/tv show .. or here :) Good to know you're working so hard to improve IMFDB on a daily basis. :) Oh, and happy holidays. MoviePropMaster2008
any objections to me changing it and adding a redirect? Also, sorry that message double posted. Not sure how that happened. --Zackmann08 11:09, 25 December 2011 (CST)
Specifications
You must hate me for continually bombarding you with questions... Hope you know I'm only doing it cause I want to make sure I am helping and not just causing problems... Also you are so much smarter than me... Anyway enough kissing up... With guns that have Variations (Heckler & Koch P2000 or Heckler & Koch USP for example), should each subcategory have its own specifications with the different length, capacity, etc. For example should the Heckler & Koch P2000 have just one specifications section for the page or should there be one for the H&K P2000 and one for the H&K P2000SK. (This is the way I did the page but I want to make sure that this is ok. If I'm supposed to just do one section I will gladly correct it.) --Zackmann08 16:05, 25 December 2011 (CST)
Fair enough. Thanks! --Zackmann08 17:11, 25 December 2011 (CST)
S&W Specs
Hey man. One gun I know I could use some help on is the Smith & Wesson Model 460. The S&W website only list it with 8"+ barrel lengths but I know at some point it was made with a 5" barrel. If that's in ur book, that would be great. Other than that, if you feel like looking through the Smith & Wesson page and just filling in the question marks where info is missing that would be a huge help. :-) --Zackmann08 23:09, 8 January 2012 (CST)
Just got an idea from a guy in the forum that I wanted to bounce off ya. What do you think about adding a column to the Smith & Wesson page that list the Frame? (J, K, L, etc). Could definitely help with the identification process. --Zackmann08 16:15, 9 January 2012 (CST)
Thanks
Thanks for the assist on Homicide. --Funkychinaman 22:42, 9 January 2012 (CST)
I knew it was special due to the adjustable sights, but I guess I didn't look hard enough. I admit, I'm bad with M1911s. It's hard to pick up on distinguishing details sometimes. --Funkychinaman 23:06, 9 January 2012 (CST)
Moving pages?
Huh? I'm actually against the moving of the 870 shotgun page. I think we take for granted that people automatically know what they're looking at because We see it all the time. I actually prefer being MORE clear by putting shotgun, rifle, or pistol in the actual title. Do you have any objections to that? :) MoviePropMaster2008 22:14, 11 January 2012 (CST)
Just wanted to add my apology for the part that I played in this debacle. I left a longer explanation on MPM2008's page... With no intent to throw others under the bus, I would have used the move function if I had changed the page but I wanted to leave it for an admin to do. As I said to MPM2008, I will not be moving any gun pages any more. Period. Anyway, just wanted to say I was sorry, again. --Zackmann08 18:44, 12 January 2012 (CST)
I created a template for the manufacturer pages (Manufacturer Template). I am going to add a link to it from the [[Category:Manufacturer]] page. I would love any input from you and other admins on it. I want to make it as straight forward as possible. Thanks! --Zackmann08 13:36, 19 January 2012 (CST)
Colt Challenger
Hey man, I found a better quality image of the Colt Challenger and I was going to replace yours but I wanted to make sure it was ok with you first. :-) --Zackmann08 01:08, 26 January 2012 (CST)
Sounds good! Thanks man. --Zackmann08 11:42, 26 January 2012 (CST)
My mistake. Wont happen again. As always, you make a good point. Thanks for you guidance. --Zackmann08 11:05, 7 February 2012 (CST)
Admin....
I cannot believe you nominated me for admin status... You rock. :-) --Zackmann08 11:47, 9 February 2012 (CST)
Blu ray
Check the Videolan forums on Blu-ray playback --Ben41 18:11, 16 February 2012 (CST)
CSI NY
Hey man. Just wanted to say thanks for the help with the CSI: NY - Season 7 page. :-) --Zackmann08 10:55, 22 February 2012 (CST)
Thanks again for the help! Just finished uploading the last screenshots. Still a few unknown guns but other than that, DONE! --Zackmann08 20:39, 24 February 2012 (CST)
Continuity error
I just assumed it was different lighting/angles but I'll trust whatever you want to put up. :-) --Zackmann08 00:03, 28 February 2012 (CST)
1911 Gallery
Hey man. Thanks for the feedback on the 1911 Gallery. As I have said before, I'm still a newbie with guns so it is always great to get feedback for the more experienced/knowledgeable folk. If you are willing to help me out with the page, it would be great to organize it in a more useful manner. I really like what --JazzBlackBelt-- did with the SIG-Sauer P220 Pistol Series Gallery. I'm going to try too modify the 1911 Gallery so its more like the SIG one. More categories is a definite must. Also a 1 sentence description of identifying marks would also be helpful. Any and all help is, as always, appreciated. :-) I'm in the middle of college final exams so I probably won't do much work on this until the weekend. --Zackmann08 12:24, 22 March 2012 (CDT)
your the man! --Zackmann08 12:39, 22 March 2012 (CDT)
I REALLY like what you're doing with the page. Feel free to move your stuff to the main page once you're done sorting it. :-) --Zackmann08 22:00, 22 March 2012 (CDT)
Let's call it a fair split. I did the easy, busy work of compiling the stuff and you did the meaningful part of sorting it in a way that actually makes sense.--Zackmann08 23:38, 22 March 2012 (CDT)
I'd love to replace the stuff on the main page with your new categories, but i dont want to do it until you are done with your re-organization because I can tell there are some that you havent done yet.--Zackmann08 23:38, 22 March 2012 (CDT)
I need you or another admins help, my other account was blocked wrongfully.
Hello, I was wondering if you could help me with an issue I am having. Admin "Evil Tim" blocked me for no reason thinking I was some guy named "Burt", which I am not, my name is Danny. I tryed to contact him about it on my blocked account "Glock17gen4", but it wouldnt let me so I'm forced to use this account I made. I tryed to contact him and I have no received a reply, I think he is ignoring the msg or something. I was wondering if you could help and unblock my other account, thanks. SaferSephiroth 16:24, 7 April 2012 (CDT)
Thank you for helping, but Evil Tim blocked me again...
Yes, he thinks I am this Burt Reynolds Mustache guy, I dont know why, it seems he doesnt check IPs before blocking. He says he thinks I am that person because I changed the gun on the Perfect Dark page to the one on the Goldeneye 007 page. I only did that because the "classic guns" in PD are based off the ones in GE 007, I was only going off what I thought was accurate, and at the time the GE 007 page said the DD44/CC13 was the Tokaypt or whatever, I was fooled I guess. I am sorry I didn't know that it was actually the Tokarev, but I am not Burt Reynold's Mustache(lol) and I really wish to be unblocked again, I wish there was a way to explain to Evil Tim that I am not that user besides the fact that my IP would be different than his. RugerLord 14:32, 8 April 2012 (CDT)
And then he goes on a vandalism spree on Evil tims pages and then mine when I revert his vandalism. Thanks Predator.Rockwolf66 19:06, 8 April 2012 (CDT)
Delete
Hey man, any chance you can look at some of the pages up for deletion (Category:Delete)? There are a couple of blank gun pages (Smith & Wesson Model 619 for example) that I nuked a while ago and haven't been deleted yet. It'd be great to have an admin review these. Thanks! --Zackmann08 13:37, 27 April 2012 (CDT)
Hey. So first off, a disclaimer, I am posting the following message for each of the Admins so don't think I'm spamming. Just want to get input from all of you. I have been working on a number of infoboxes for different pages (Template:Infobox Movie, Template:Infobox TV, Template:Infobox Video Game). I have already gotten some help from Bunni who installed an additional add-on to facilitate the templates. I would love to get some feedback from you (and other admins) regarding these. Do you like the format? Are there things you would like changed? Should additional information be added? The nice thing is that with the add-on that Bunni installed, you do not have to provide all the information for the infobox. Any variables left blank will simply not be printed.
Finally, I would like to see how you feel about my adding these to pages. I have gotten positive feedback from a number of users (including at least 3 admins) but before I add this to more than a dozen or so pages (which I have done for testing purposes) I want to really get full permission. I know that sweeping changes are a MAJOR no-no without full admin approval. Check out the thread in the forum (http://forum.imfdb.org/showthread.php?t=1942). I look forward to hearing your feedback! :-) --Zackmann08 11:17, 9 May 2012 (CDT)
