| Error creating thumbnail: File missing Join our Discord! |
| If you have been locked out of your account you can request a password reset here. |
User talk:MT2008
ARCTIC WARFARE
My friend, i have done the job of describing the differences of the Accuracy International Arctic Warfare series check the discussion board of the page. i hope you appreciate my work.-User:SargeOverkill
User 67.183.66.44
It is better to block this idiot for an infinite period of time, since just as his blocking period expired he has started making his usual changes, Take for example, he added the pistol and machine pistol category to full-sized SMGs like Spectre M4 and Jatimatic.--SB2296 08:56, 1 January 2010 (UTC)
S&W 4500
I recently combined the smith & wesson 4505, 4506, 4516, and 4566 articles into one. I was told to contact an administrator to see about removing the old individual pages if the change is considered acceptable. -Anonymous
- (What I wrote to ANONYMOUS) I just banned an IP address (person did not log in as user Anonymous) for wholesale removal of data from three S&W pages. That is NOT the way to do it. If this is YOU (i.e. Anonymous User), I will lift the ban, but you CREATE the new page first and then cut & paste the old data AND then put a note at the TOP of the old page explaining what you did. Suddenly BLANK Pages by unknown IP addresses usually AUTOMATICALLY put up a big red flag. If that is you, ALWAYS log in before you do stuff like that. Unknown IP address get automatically banned for that. MoviePropMaster2008 18:43, 29 January 2010 (UTC)
The Stand
Why so snarky? The last photo does appear to be some type of folding stock attached to the weapon. And why did you not either send me a message on my page or add to the discussion page for the movie? I don't mind a debate but I'm puzzled by your tone. Have I done something to you lately? I was under the impression that we strove for some type of polite excahnges here. --Jcordell 02:47, 1 February 2010 (UTC)
Sure I understand how that goes.We all get tired and sometimes come across in wasy that we didn't intend. Not a problem. I thought I saw a folded stock in the last screecap, but I'll change it to the 89 model.I'm not a big MP5 guy. More into S&W revolvers. Thanks. --Jcordell 16:52, 1 February 2010 (UTC)
I am back again
Hey Matt, Things have been slow so I have to work twice as hard to make ends meet. The Industry has been off as of late but did work on some TV shows. Shop work is slowly coming on line so that will be nice. I like the new things going on with the website looks good. ritwikbmca new templates look great don't know if the rest of the admins had agreed on them as standard. I have been hearing from others in the Industry about the site most good some feel that there are some errors that need to be corrected. I did find out that some film archivist are looking at the site to very weapons and props used in the films which is very cool. A couple have stated we should think about adding studios to the show info so it can be used as a cross reference. I believe that no matter what people believe that IMFDB will be similar to IMDB on the information it has. I have other show that I have screen-capped and hope to post some more this week and go back through others to check them of errors. -Phoenixent
Buying a SIG
I may be looking into getting a SIG P220 (45acp). At the gun shop where I bought a S&W 4505 (same as your 4506 but blued, carbon steel). After the 3 day waiting period is up on the 4505, I'm going to take my Desert Eagle up there and see what they'll give me for it. The SIG in question is a two tone model, nickel side, black frame. It had a better grip than the 4505 but it was $50 more (listed at $600) and wasn't as clean as the 4505. Are the pre '96 stamped slide models the best to get and is there anything else I should look for? Is there anything else negative about the post '96 models other than the slide weight? --Predator20 19:23, 6 February 2010 (UTC)
- Thanks for the response, very informative. No problem with it being long either. Cleared up a lot of questions. I'm pretty sure it had the older style plastic grips. I don't think it had nickel controls either just the slide. I'll bring the date list with me and check. I didn't really give it a good look over. I just saw that was as clean as the 4505. I went into the gun shop just to see what they had, didn't plan on buying anything. I saw that 4505, you don't ever see them just the 4506 models. That had some P226's too, didn't really look at them. I already have a few nines and was wanting to get some .45's. If the Desert Eagle was a .44 I would keep it, my S&W 586 takes care of my .357 needs. If the SIG isn't up to par I get something else and look into getting one later. Thanks for the help. Also I considered trying to buy your 4506, but since it's a pain for you to ship out of state, I went local. --Predator20 20:34, 6 February 2010 (UTC)
- No SIG for me. Gun shop wanted to give me $500 for the Desert Eagle. I didn't handle the SIG again. But I was wrong about the grips. Had the newer style. I'll get a SIG later. I'm very pleased with the 4505. I just wish the grip had a little swell on the sides to keep it from being so flat. I'll post some pics on the forum later. --Predator20 23:32, 9 February 2010 (UTC)
User 67.183.66.44
He's back. I've had to fix almost a dozen pages on which he did edits. For one thing, he adds custom gun pics to the main gun pages, and then he doesn't even format it correctly. WTF? MoviePropMaster2008 18:10, 22 February 2010 (UTC)
Seecamp LWS-32
I replaced the image of the Seecamp from Weapon Specialists LTD with one from my own inventory. At least it's one of our own copyrighted images. Hope you like it. :) MoviePropMaster2008 07:56, 27 February 2010 (UTC)
User 67.183.66.44
I just had to to block him AGAIN for one month. I'm tempted to permanently ban him. Literally the MOMENT that his ban expired, he started making TONS of changes, most of which were stupid and required fixing. Thoughts? Should this guy get a longer ban? MoviePropMaster2008 19:25, 27 February 2010 (UTC)
RE: Afghan Breakdown
In regards to your question I'm afraid there hasn't been a version of Afghan Breakdown released with English subtitles, officially or otherwise. I tried looking for them when I originally watched the movie and found that the torrented version was Italian-dubbed while the only available subtitles were Polish. --Markit 02:32, 13 March 2010 (UTC)
So are you happy now?
I'll get one of the Canuck Flat top soon.... ;)
MoviePropMaster2008 06:40, 19 March 2010 (UTC)
BTW: More pics ;)
I've been replacing a bunch of the lame pics. :) MoviePropMaster2008 06:52, 19 March 2010 (UTC)
There's no pleasing you ;)
So are all the Canadian shows have the Oly grip on them? Are you sure? If they have the A2 style pistol grip, then it's essentially the same rifle. Also the 715 is not mine so I won't be getting that back to photograph any time soon. MoviePropMaster2008 19:29, 19 March 2010 (UTC)
What about Stargate and other shows?
There are TONS of TV shows filmed in Canada and I'm not sure that they use the Oly grip. I 'think' Seven days had the A2 grip and SG1 had the A2 grip sometimes. Let me know if ALL of the Canadian shows have the Oly grip, but I am sure I've seen other lowers on the guns in the past. I will try to get the rifle upper back and film it on an Oly lower. YOU KNOW I'm the ONLY IMFDB member who bothers to do that! ;) MoviePropMaster2008 19:57, 19 March 2010 (UTC)
Deleting Frankengun pics
I just deleted another one of my pics 'modified' by a member. I don't mind placeholders but the noobs don't give accreditation so I delete them as soon as I see them. People doing 'frankengun' chop jobs DE-motivates me to go out and photograph the real guns, and we don't want THAT to happen. :) I mean why bother trying to track down the real guns from HEAT if some guy is going to PS Franken gun another gun? If it looks decent enough the reason and motivation for me to take the time (and irritate my fellow armorers) becomes less and less compelling. Thoughts? MoviePropMaster2008 19:57, 19 March 2010 (UTC)
C7 stuff
I was going to overwrite your old C7 shot with this new image, but then I realized that the naming nomenclature would be wrong and give the wrong impression (i.e. naming the file c7 when the rifle is a 715). I am looking forward to fixing the UGLY pics of the Diemaco section of the M16 page soon. Just a thought regarding a movie page, I don't think the rifles in Operation Dumbo Drop are 715s. Those 715 uppers were really prevalent in the 1990s when the supply of original M16A1 uppers dried up and everyone stopped making them and went to the A2 uppers. A lot of guys who wanted the M16A1 look but didn't have an A1 gun were buying what we all called 'The Canadian A1 upper' to build up their guns. So it's a regular franken gun with a straight ring and light barrel that happens to have a 715 upper receiver. It's the real life franken guns that trips us up. AR parts from so many manufacturers are so prevalent that we can be seeing Bushmaster or DPMS or Eagle Arms (now defunct) or Pac West guns all over the place. I remember that Colt was NOT selling their lower receivers (assholes) before the first Clinton ban, but everyone else was. I bought over 30 Pac West receivers and built them up into AR15 variants before the first AW ban. They were about $55.00 (and then jumped up to $400 just before the ban.). Just a note. MoviePropMaster2008 20:32, 19 March 2010 (UTC)
Colt cowards
They were one of the first ones to CAVE when the gun control fanatics started their jihad against gun owners, starting with the Stockton shooting in Feb 1989 all the way to the passage of the Clinton AW ban in 1994. Colt SOLD complete emasculated rifles with no bayonet lug and renamed receivers. Colt refused to sell lower receivers upon which to build custom guns. But that's what armorers wanted. We swap out uppers all the time. So unless the armory (like Stembridge, and later CW who picked up a lot of their stuff) bought all their guns in the 1970s and 1980s, from Colt, the most prevalent build up guns would be by other manufacturers. IN the early 1990s Colt rifles were more expensive than many competitors and also harder to find. Colt, IMHO, is the American H&K ;) MoviePropMaster2008 21:04, 19 March 2010 (UTC)
715 photo
Just talked to the owner about getting the barreled upper for a shoot. He will be available in about 2 weeks. Also I discovered during our conversation. ((I didn't look that closely at the gun because it was a really quick shoot that I had to do in about 3 minutes! Someone put the gun against the white background and I lit it and click off about a dozen shots from that angle only and off it went))... that it was a full Colt 715 kit but mounted on a pre-1989 Bushmaster XM15-A2 lower that was legally converted to full auto fire from a civilian receiver (i.e. a post 86 sample). There are small 'marking' differences, i.e. the full auto setting word was stamped on LATER. Does that make a difference? Or should I reshoot the entire gun with a Colt lower receiver? MoviePropMaster2008 22:51, 19 March 2010 (UTC)
Got an easy fix for the 715
The Factory Colt 715 has no select fire markings on the right side of the gun. I can just 'clone' out the markings, though I don't like to do that, (I use Photoshop just to remove SNs if needed, scratches, cracks, oil stains, weird reflections, etc. I try not to fundamentally change the look of the gun, just to 'clean it up'). But I can clone out the Bushmaster Selector markings and keep it blank. Thus for all intents and purposes, it looks like a Colt 715 lower from that side. MoviePropMaster2008 22:05, 20 March 2010 (UTC)
- (EDIT) Done. I also cloned out a big fat THUMBPRINT that I left on the upper (oops!) hahahahaha. Don't want to pollute IMFDB's pics with that kinda stuff! :) MoviePropMaster2008 23:10, 20 March 2010 (UTC)
SIG P228
You know, I've been itching to replace that 228 with a better pic. That gun was dropped and in the middle of repair when I snapped a pic of it. The frame was scratched really bad (from a car stunt) and was repainted with black spray paint. It was NOT the best example to use. Should we let Joker keep his P228 pic until I can get a better screen used P228 sample? At the least, it will be a reminder for me to get a new P228 pic. Thoughts? MoviePropMaster2008 21:28, 22 March 2010 (UTC)
- I opt to keep the beater P228 pic for now. It IS a screen used gun, but nothing big or eventful, mostly B-movies and I can't figure out where it was rented to. I will try to get a screen used P228 from a BIG MOVIE from CW hopefully soon. I will be out of town for a WW2 documentary shoot for NATGEO in the South Pacific again (I leave on wed), so I will not be able to screencap or take pics (only some blank firing Pistols of which IMFDB already has the pics for and a BUNCH of rubber Arisakas and garands for some reenactments for the documentary film crew). I will be back 1st week of April. I will be on here on IMFDB, though via wi fi from the lap top from the hotel. If we get rained out, you'll be seeing me here on IMFDB! hahahaha. best regards MoviePropMaster2008 22:38, 22 March 2010 (UTC)
Desert Eagle
Great work on the page. :) Let me know what you need help on. I think my brother has Lucky Number Slevin. So I'll check and see if the model can be determined. --Predator20 20:52, 29 March 2010 (UTC)
- Yeah I could give two shits about the video game junk too. Most of them will probably Mark XIX. The grid pattern isn't necessary unless it's a long list. But anyway I'll help what I can. Also that custom Eagle you just uploaded is a USA built one. --Predator20 21:06, 29 March 2010 (UTC)
- Yeah that's what I would do, let the hardcore gamers sort that crap out if they care so much.(Very few would be Mark VII) Also even though there wouldn't be any blank converted Eagles in the .440 Cor-Bon caliber I added it to the specifications to be more accurate.--Predator20 21:27, 29 March 2010 (UTC)
I'm pretty sure the .440 version didn't have the flutes. Also I'm throwing a wrench here. But I think the early Mark XIX models at least in the .44 Magnum may not have had fluted barrels. --Predator20 21:58, 29 March 2010 (UTC)
- Why do they prefer the .50 AE? Does it cycle better than the .357 and .44 because you can get a heavier powder charge? Or I'm wondering if the .50 isn't rimmed like the .357 and .44 makes it easier. All this talk about Eagles makes me what to go shoot mine.--Predator20 22:28, 29 March 2010 (UTC)
- I helped identify Desert Eagles appearing in animes and a few video games. Even after this a lot of video games are left, some of which cannot be identified since either those pages have no screencaps to identify the model or the Desert Eagles appearing in them have components of Mark I,VII,XIX mixed together!. I also deleted some video games, films, anime and television series appearing in the page which appeared in red.--SB2296 06:21, 30 March 2010 (UTC)
Blanks
It took them a while to get .45 1911's to cycle blanks also. It seems like it would be tough to get a DE to cycle reliable with blanks. Don't know if you handled one and racked the slide. (Fucking heavy). I almost smacked myself in the face after shooting mine and then switching to a Hi-power. --Predator20 23:01, 29 March 2010 (UTC)
- I'll have to search the forum and read your Desert Eagle story. The .357 is the biggest handgun caliber I have shot. I don't go shooting with anyone else besides my dad, so I don't get to shoot anyone else guns. I'd like to shoot a .50 just for the experience. You can't trust internet gun users about gun recoil.--Predator20 23:39, 29 March 2010 (UTC)
No it's fine like it is, thanks though. They can click on the image and see who it belongs to. --Predator20 02:34, 31 March 2010 (UTC)
Also I think I'm going to have a problem with a user on the Death Sentence page. He made some okay edits. But he took one of my images off the page and wrote he used different gun and renamed some of the image files so they ended not showing up. (I hope I didn't confuse you) --Predator20 02:34, 31 March 2010 (UTC)
RE: Desert Eagle
I'll be adding the template to the page. Can you help me with it?--SB2296 07:07, 31 March 2010 (UTC)
Boondocks Saints 2
Oh alright, I'll leave it to you. One less thing on my to do list. I'll go work on Ninja Assassin. Excalibur01
screencapping
Well I need some help cause I have no idea how to work the screen capture feature on VLC Excalibur01
delete
Need this file deleted, uploaded it by accident, when I should have been uploading over an existing file. Thanks --Predator20 23:14, 3 April 2010 (UTC) http://www.imfdb.org/index.php/Image:FDTD-00115.jpg
From Dusk Till Dawn
Thanks. The page wasn't really missing any screencaps, but was lacking in good ones. Also I borrowed Lucky # Slevin, so I'll check out the DE used. I think the page is incomplete so I may end up capping it. Plan on adding some caps of the missing revolvers in The Killer too.--Predator20 00:05, 4 April 2010 (UTC)
Mods & Stuff
yeah, he was writing snarky sarcastic stuff. Sounds just like a kid. Personally I think some of our newer (foreign) members are 'young' based on their actions (and preferences). For one, I don't like spending time arguing why we should NOT have a section on suction cup arrows LOL! We always get some noob waltz in and start challenging the rules of IMFDB (Gee, why don't you guys start doing THIS instead?) Thankfully I've seen some of our experienced (and even some newer members who 'get it') step in and intervene. It's gratifying to see that we have members who follow the rules and enforce that amongst other members. :) the shoot was a mixed bag. It was really windy and stormy in the South pacific. Even though there was no rain, the wind gusts knocked me down several times. I'm only here for a few days. I leave for Rome for a shoot and then for a gig in Hong Kong. No I don't take any weapons with me ;) I only act in a paid advisory capacity. But depending on whether I can get internet access from wherever I'm at in the world, I may not be around for April-early May. We'll see. Sometimes the shoot days are so long, that I just crash at the end of the day. Anyway, I felt like I was the lone mod sometimes (but again, we have quite a few experienced standard members who are doing a good job of reigning in some of the wacky changes made by 'drive by members'. :) MoviePropMaster2008 03:39, 4 April 2010 (UTC)
Re: Model 733
Thank you for clarifying this for me. While we're on the subject of the M16 series, would you mind if I went ahead and phased out the older Model 715 picture and deleted it in favor of MPM's pic? It's rather redundant to have two pictures of the same weapon, especially when one is significantly higher-quality than the other. Orca1 9904 19:44, 4 April 2010 (UTC)
The Killer
The replica HPs must have been used by the triads. There is one good view of a HP. It appears to be a Inglis, judging from the front sight and finger notch on slide. They were imported into China during WWII. Interestingly they put an A1 style birdcage flash hider on the Norinco 56. Any of the trivia stuff you learned please add to the page.--Predator20 02:24, 5 April 2010 (UTC)
Yeah I think that modified revolver may be a Taurus also. Since most of the fired revolvers are Taurus. There are some really good close ups of some of the guns. Makes iding them easy.Other than some text and one or two images that need to be uploaded over. I'm through with it.--Predator20 02:56, 5 April 2010 (UTC)
Disambiguation page
I have created some disambiguation pages,eg, M3 and Delta Force to improve page navigation in IMFDB. Considering the latter I used to hate when I typed to search the video game Delta Force when the site redirected me to the movie page Delta Force with the same name. So I am currently in the process of making disambiguation pages for pages with similar titles to make navigating pages easy. Ben41 asked me recieve the sysop's consent before undertaking this project.--SB2296 14:29, 8 April 2010 (UTC)
- I think we should keep the pictures in the disambiguation page atleast for the guns.--SB2296 06:23, 9 April 2010 (UTC)
Lois & Clark: Tempus, Anyone?
Where did you find the Gali AR? I couldn't find it, but is this the Gali AR (the one being waved by the man in the middle) in this screeencap? - Kenny99 13:41, 9 April 2010 (UTC)
RE:RE
Thanks for the info. I was able to find more guns and a poster of guns in that episode. - Kenny99 14:42, 10 April 2010 (UTC)
General Information
Shouldn't IMFDB Info - The History of M16s in Film and Television be added to GE? It's locked so reg users can't edit it.--Predator20 04:56, 11 April 2010 (UTC)
- Another thing, the purpose of the General Information category was so a glossary of firearm terms could be made up. Nobody has created one. Should it just be called Glossary or Glossary - Firearm Terms? I figure a section for gun types, action, malfunction. I'm not sure what else. --Predator20 22:17, 13 April 2010 (UTC)
I added it to general information category. MPM didn't want anyone else messing with that page is the reason why it was protected. Probably best to change it back to that.--Predator20 00:57, 14 April 2010 (UTC)
- What about a page for all gun related abbreviations.--SB2296 06:50, 14 April 2010 (UTC)
Beretta
Sure. I can do that. By the way I have no idea what type of M16/AR15 they are using in Jesse Stone: Death in Paradise. Whne I was in the Army we had the M16A1, M16A2 and the M4 carbine. Truth be told I've stopped trying to follow all the different variations. So I will leave it to you or somebody else to figure out. Thanks. --Jcordell 02:20, 22 April 2010 (UTC)
Thanks on the M4 info. I'll get that added. As you've probably gathered over the past few months my strength is in revolvers and the older firearms. The new stuff I can identify, but all the variants leave me cold. I think I stopped paying attention around 1995. --Jcordell 02:29, 22 April 2010 (UTC)
User talk:99.12.124.133
I hate to report this, but this user keeps creating pages with only a minimal amount of information and I'm not sure what to do. I hate to have to go and fix every page this user makes. --Ben41 22:38, 23 April 2010 (UTC)
Andromeda Strain
Thank you for your additions to The Andromeda Strain. I plan to rent & cap this sometime in the near future, but the extra work on the page is appreciated. Orca1 9904 19:10, 25 April 2010 (UTC)
- Thank you for capping this as well. I was planning to cap it myself, but the help is again appreciated. One minor note though; the name of the M1126 APC is spelled 'Stryker', like the name, not with an I. Orca1 9904 00:09, 19 May 2010 (UTC)
Are you psychic? Part deax
Again within SECONDS of me uploading a hero gun pic, you comment. Your Jedi Mind powers are starting to freak me out. I just flew back into the US this morning and I'm trying to adjust to the time zone change again. I'm also trying to fix the WWS page since I never liked the overdoing of the screencaps on that page. It held the record at one time, 36 shots of the same gun in one section. Ben41 and I am working on it since it is one of the most viewed pages on IMFDB. MoviePropMaster2008 02:05, 1 May 2010 (UTC)
AKs and Canucks
Those AKs built for We Were Soldiers were built in 2002, so they could not have been in anything prior to that. They were built because the filmmakers, upon learning what we all know about Type 56s, etc. opted to have tons of real milled receiver guns built for the film's authenticity. The last time I saw them, they were the same color (i.e. wood furniture) so they're pretty easy to spot. As for replacing the real AK-47 pic, I'm trying to get a pic of a real example from an Army Museum, so that we have a real Soviet one for all those film entries that were done overseas over the years. I hate those jacked Type 1-3 examples, for one they don't represent what was actually a production model and they're also readily recognizable jacked images. But since the WWS AKs had that weird wood, I wouldn't replace the other pics just yet.
BTW, I finally learned why Canadian movies and TV shows have so many Olympic Arms AR rifles ....AND?!?!?!?!?!?!?!?! mpm
Heat
Thanks for the correction. I didn't realize I had put the Colt under the subgun category. I'm just going in and organizing some of the pages. I want to point out that I'm not changing any of the text or screencaps. But Heat and Ronin are some of our most viewed pages and they had different types of firearms scattered all over the page, Guess I'm just anal. --Jcordell 21:38, 9 May 2010 (UTC)
Virtuosity
I will take a look again at my screenshots to see if I have them. --Ben41 16:25, 15 May 2010 (UTC)
nice to see you back
I'm going a little stir crazy here. A lot of the veteran mods are MIA. Good thing we have some really great vet users who are trying their best to improve the site. Hahaha. I just got the Farcry DVD but I see you already did it. :) Does that mean you're back? :)MoviePropMaster2008 21:58, 24 May 2010 (UTC)
Armyguy277 user page
ok first of all the k4s were on the page becuse it was the clossest i could get to a C7/C8 and second WTF do you care it is my userpage --Armyguy277 20:58, 26 May 2010 (UTC) PS how do you tumb nail --Armyguy277 20:58, 26 May 2010 (UTC)
you da man!
Now that I have some good pics of the gun, I have some chopped Type 56 barrels lying around here. I can put a post ban Type 56 front sight and an American Krinkov Muzzle brake on it. I have a messed up AK receiver that I do parts work on. Think I should build it? Don't know what to call it since it IS a 100% gunshop custom frankengun. Do you think calling it a Fake East German MPi-AKS-74NK is appropriate? I just thought it was the closest production AK variant to that monstrosity :) MoviePropMaster2008 01:59, 27 May 2010 (UTC)
delete
Need to delete this image, we already have an Inglis Hi-Power pic.--Predator20 14:45, 27 May 2010 (UTC)
http://www.imfdb.org/index.php/Image:Browninghipower9mm.jpg
File:Armyguy277 ok thanks
HK21
I think HK21 needs its own page since it has three-four variants of its own (HK11,HK23,HK13,GR9). What do you think?--SB2296 07:25, 28 May 2010 (UTC)
- BTW we should create a set of rules stating whether a gun should demand its own page or be redirected to another page for a gun from which the former gun was derived. Earlier there were many controversies regarding these redirects (though the FPK/PSL thing was my fault, it was actually a AK style receiver on close inspection) and these set of rules will define the place where a gun actually belongs to. For example, like the HK21 the PSG-1 is a modified G3 and happens to be in the G3 page, but it has a sub variant of its own (the MSG-90) and I believe it should have its own , separate page. And by doing this, pages like the AK-47, M16 and G3 will be brief in size too.--SB2296 07:48, 28 May 2010 (UTC)
New Weapons Infobox Template
I just created a new weapons infobox template. Its just a modified version of the previous templates put together (since I don't know how to create one from scratch). It is only in the prototype stage and I will request help from other members, who know more about creating these templates.What do you think about the template? Should there be any new features?--SB2296 09:21, 30 May 2010 (UTC)
Carbines, Repeating Rifles
I'm getting confused with repeating rifles and carbines and I am having trouble sorting out repeating rifles and carbines in Lois & Clark. Here's some questions I have:
- 1. Should carbines and lever-action repeating rifles go in the rifle section?
- 2. Are semi-auto carbines like the Ruger Mini-14 considered as rifles or assault rifles?
- 3. Are carbines the same as rifles?
I hope I'll be able to sort them out once I find out about carbines and lever-action repeating rifles. - Kenny99 22:49, 1 June 2010 (UTC)
RE:
I just created a separate page for the HK LMGs- [1] As for the template, I'm trying to take the extra space in consideration and add more IMFDB specific content to it.--SB2296 09:09, 2 June 2010 (UTC)
Delete list
http://www.imfdb.org/index.php/Image:VIDEO_TS_%28title_0_ch_2_frame_10157%29.jpg
http://www.imfdb.org/index.php/Image:Punisher_M1911a.jpg
http://www.imfdb.org/index.php/Image:VIDEO_TS_%28title_0_ch_16_frame_75585%29.jpg
http://www.imfdb.org/index.php/Image:VIDEO_TS_%28title_0_ch_19_frame_88904%29.jpg
http://www.imfdb.org/index.php/Image:VIDEO_TS_%28title_0_ch_16_frame_73433%29.jpg
http://www.imfdb.org/index.php/Image:VIDEO_TS_%28title_0_ch_16_frame_73942%29.jpg
http://www.imfdb.org/index.php/Image:Punisher_ShotgunA.jpg
http://www.imfdb.org/index.php/Image:Punisher_AcetyleneGunA.jpg
http://www.imfdb.org/index.php/Image:VIDEO_TS_%28title_0_ch_19_frame_91493%29.jpg
Sorry about the long list. I use to upload over existing caps, but when there are several contributors and they label differently. It's more trouble than it's worth to sort.--Predator20 15:11, 4 June 2010 (UTC)
Real-Time Strategy Computer Games Allowed?
I was wondering if strategy games are allowed. There are some that have real weapons (such as Company of Heroes, which I'll try to do) and players can just zoom in to get good shots of the guns. - Kenny99 00:08, 5 June 2010 (UTC)
Re: Lethal Weapon S&W
I was looking at the Lethal Weapon 2 page not long ago and saw that the S&W was changed from a 5906 to a 659. I don't remember where I saw it (one of the discussion pages I think) but someone had wrote that the 5906 in Lethal Weapon 2 couldn't be possible at that time period so it had to be a 659. And then, seeing as Murtaugh used what I think was the same gun in Lethal Weapon 3, that's why I thought it was a 659. But seeing as you've just provided better evidence, I'll change it back lol. My mistake. -Gunman69 18:08, 6 June 2010 (UTC)
Should I have blocked this guy?
He's an anonymous IP address and all he did was slowly, bit by bit, delete the entire discussion page of the VG. It struck me as weird, but I could be tired and cranky so I thought I would asked a few other Mods to see if I overreacted. I can always life the ban. http://www.imfdb.org/index.php/Special:Contributions/72.9.28.64 MoviePropMaster2008 03:16, 9 June 2010 (UTC)
delete page
http://www.imfdb.org/index.php/Talk:Shoot_Em_Up
Someone started this talk page and had Russian language in it, I cleared it. But still needs to be deleted. --Predator20 01:29, 11 June 2010 (UTC)
SIG cont.
I checked that SIG out at the gun shop again. They had dropped the price from $600 to $570. But after looking over it better, all over the nickel slide, tiny spots of the finish are missing. Pretty poor gun. They have an all black one a little cheaper but it wasn't much better.
I found one on gun broker I really like for $575. Here is the description "Sig P220, West German Manuf. This Sig has been refinished by, CCR / Cummings Custom Refinish. There are no issues and was in Excellent Condition prior to Refinish as it is now, low round count and all Orginal factory parts."
pics.
It's technically reverse two-tone by SIG standards, but norm for others. It's a $160 for the refinish job, not to mention shipping. --Predator20 18:38, 19 June 2010 (UTC)
- I've bought a few older guns off GB and I haven't had any problems. (knock on wood) Generally if the gun was really beat up prior to refinishing, it would still show. Also the grips should actually be the checkered style right? --Predator20 15:00, 20 June 2010 (UTC)
The all black P220 at the gun shop had Hogue finger groove grips, they were much too big for me. The two-tone had the pebble grain and it felt just right. The non finger groove Hogue's may be okay. A few hours before the two-tone SIG above goes out, there's an all black West German one with factory box, papers and two mags. It's in very good condition. It's at $350 right now, I may try to get it, depends on how crazy the bidding gets. --Predator20 01:23, 21 June 2010 (UTC)
- Well it looks like I'll be the two-tone SIG owner. I got into a bidding war with the black one above. Bowed out at $475 (it was back and forth). I figure the extra $100 on the two-tone would be worth it. Even if it didn't come with extra mag and box.--Predator20 22:33, 21 June 2010 (UTC)
- No prob on getting back to me. I like the two-tone much much better too. But I figured if I could have saved a 100 bucks or more, it would have been nice. But after getting outbid the last time on the black one, I was relieved --Predator20 23:26, 21 June 2010 (UTC)
This user
Check out what this user did to the MAC-10 page, I reverted his edits. Not sure what the punishment should be.--Predator20 23:17, 25 June 2010 (UTC) http://www.imfdb.org/index.php/Special:Contributions/69.92.163.96
Crossing Over
Thanks for doing this page. I was going to do this page, and I started doing some screencaps, but I never got back to it. I just uploaded the pics I already had done, but you can go ahead and do the rest. --Ben41 22:49, 27 June 2010 (UTC)
Unfortunately, I don't have the DVD anymore, and that's all the ones I got to. --Ben41 22:58, 27 June 2010 (UTC)
Delete
http://www.imfdb.org/index.php/Image:HD-AUG.jpg
Thanks--Predator20 01:18, 29 June 2010 (UTC)
Dear Wendy
Why did you delete Dear Wendy? That was work in progress, I was still doing the screencaps and now the page is gone! Great, now you really killed my effort. Next time, just wait one single day!
AK's
Any idea what these are? I usually go by the front sight to see whether it's hooded or not. But I can't tell. Also my SIG shipped yesterday, maybe it'll arrive by Fri.--Predator20 19:26, 30 June 2010 (UTC)
Here are some full screen shots. If they can't be identified then no biggie. Thanks for the help.--Predator20 02:03, 1 July 2010 (UTC)
- Appreciate the help.
Also my SIG was supposed to be delivered Thurs. but my FFL guy wasn't there to sign for it, I guess. (gun transfers are a side business for him). So I probably won't be able to see it until Mon. to start the transfer. I hope it at least gets redelivered today. --Predator20 14:33, 3 July 2010 (UTC)
Spades of Columbia
Spades of Columbia I think this guy intended to make a user page. But made an actual page instead. --Predator20 18:47, 3 July 2010 (UTC)
Thank you, I Love movie and know guns, but i am ignorant on computer codes and what not. I'm learning or at least trying to.--Spades of Columbia 00:57, 5 July 2010 (UTC)
Thanks
The SIG got redelivered yesterday. Funny thing, it came from NC. I hope I get to look at tomorrow. Have a happy 4th too. --Predator20 23:31, 4 July 2010 (UTC)
22 AKs
Nope there were a bunch, the ones imported by Mitchell Arms, I think, were the Armscorp ones made in the Philippines, and they looked like crap. Or the Italian Armi-Jager ones, also imported. Regardless, only the .22LR guns had that style of forearm. As for the Hudsons, I would demand proof of your assertion. I have every Hudson imported from the late 1970s on. They all look the same and they don't look anything like that. :) MoviePropMaster2008 17:19, 5 July 2010 (UTC) (BTW, I'm typing this with no sleep so if I sound insane, forget it) You know what? I think they're the .22 style AKs with other types of mags jammed in.
delete list
http://www.imfdb.org/index.php/Image:Crazies_S%26W_14.jpg
From the trailer.
http://www.imfdb.org/index.php/Image:SniperRifle-Leibw%C3%A4chter-Cobra11.png
http://www.imfdb.org/index.php/Image:CodenameTiger-StetschkinAPS-Cobra11.png
http://www.imfdb.org/index.php/Image:RassmannSecurity-IMIUzi-Cobra11.png
http://www.imfdb.org/index.php/Image:MP5K-Leibw%C3%A4chter-Cobra11.png
http://www.imfdb.org/index.php/Image:DA012-CodenameTiger-Cobra11.png
I told the guy who uploaded the 5 above, to upload jpgs in the future, he offered to re-upload these as jpgs.
Also I get to pick up the SIG Thurs. It's one sexy gun. I'm not sure if its even be fired after the refinish, unless the finish from CCR is really that good.--Predator20 01:49, 7 July 2010 (UTC)
delete tag
How do I do it? --Predator20 21:02, 7 July 2010 (UTC)
Got it thanks.
There's also the unused file section. http://www.imfdb.org/index.php/Special:UnusedImages --Predator20 21:13, 7 July 2010 (UTC)
Daewoo Paratrooper
I moved your comment to the discussion page. Thank you for the help! --Milkovich 11:18, 12 July 2010 (UTC)
Limited Time offer
To only the most TRUSTED IMFDB fellow mods! ;) lOL. If you have a 'wish list' for pics you think the site needs desperately, shoot me a list. I've been busy, but I got a STACK of guns that I haven't photographed yet, including a WASR-3 that looks EXACTLY like Sascha Robey's gun, and a BUNCH of just general replacement pics. But I was thinking you might have a list that you really wanted. this is a limited time offer! :D The only problem with getting some of the BIG armory guns is that the guys really don't like it when I bother them to snap pics when they're neck deep in a big movie production. Gotta tread lightly there. :) On the photo front, I've 'fixed and cleaned up' some guns (and those are the ones I don't put the copyright disclaimer on so you know that I'm just cleaning up jacked images). Hope your summer is going well. :) MoviePropMaster2008 04:25, 20 July 2010 (UTC)
Predators Guns
Hey Matt, The guns for Predators was supplied by ISS. I made the muzzle attachments on the Beretta 92 and the HK. Also made the mount on the AA-12 for the surefire grip/light. - Steve
Transformers 3
Okay. I was SNOOKERED. Apparently this member LIAM who is moviemaster1993 is a fanboy who created the facebook page himself, even though the page says the "OFFICIAL" transformers 3 facebook page, thus falsely implying that it is sanctioned by the studio. NOT being a sanctioned facebook page, immediately makes it suspect in my eyes and I vote for deletion. These behind the scenes photos were NOT released by the studio. They were personally taken by people on set and 'leaked'. The only reason why I did not ban it immediately was because I thought it was an officially facebook sanctioned page. It is not. We can get into serious trouble if studio lawyers all of a sudden get pissed at IMFDB and start sending us 'cease and desist' letters to 'remove' all of our screencaps. That would spell the END Of IMFDB. All because of one fanboy idiot. But I wonder what you think about the matter "No Harm done?" or "delete" ? MoviePropMaster2008 05:05, 22 July 2010 (UTC)
public enemies?
You never disclosed that anything was wrong, so this reference to an 'incident' is a mystery to me.MoviePropMaster2008 03:01, 24 July 2010 (UTC)
Screen used gun?
Is this the screen used gun from Public Enemies?--Predator20 18:38, 27 July 2010 (UTC)
I did a search earlier. I think it came from this site. http://www.everydaynodaysoff.com/tag/pistol/ --Predator20 23:38, 27 July 2010 (UTC)
- Well I think Kilgore thought it was Dillinger's actual pistol not the screen used gun. It fucking blows you can't put the screen guns on the site. --Predator20 23:45, 27 July 2010 (UTC)
Re: Public Enemies
Here is the link[2] . Kilgore 00:17, 28 July 2010 (UTC)
- You're Welcome. And I already know that it was not Dillenger's Gun after doing some research, but I don't really care because I'll never be able to use it. - Kilgore 00:33, 28 July 2010 (UTC)
Willis Beretta
http://www.imfdb.org/index.php/Image:DH3-Beretta92FS.jpg Didn't I replace this already? Or is this another version I missed? Help out my crappy memory. ;) MoviePropMaster2008 17:57, 29 July 2010 (UTC)
RE: Admin
Yeah sounds good, thanks. Another user I'd recommend is User:Jcordell. --Predator20 01:38, 3 August 2010 (UTC)
- Got admin rights now. I just want to say thanks again for the recommendation. --Predator20 16:22, 5 August 2010 (UTC)
Another RE: Admin
Sure thing. Very flattering. Thanks.--Jcordell 01:45, 3 August 2010 (UTC)
Great. Looking forward to it. Now I'll have something new to learn. And now I can create a category for Australian movies. --Jcordell 02:14, 3 August 2010 (UTC)
Also I think Ben41 would be a good addition. He and I have been working together on several pages the last few weeks and he seems like a good guy. --Jcordell 02:16, 3 August 2010 (UTC)
Thanks for the recommendation. --Ben41 03:08, 3 August 2010 (UTC)
PNG images
You can delete the PNG images I uploaded now.
--ScratteLover 14:08, 6 August 2010 (UTC)
Image name syntax
I think we should better make it mandatory for all the names of the screenshot images being uploaded to IMFDB to have a proper syntax, bearing both the movie/television series/game's name and the guns name. Just check out today's recent changes you will a couple of images bearing names such as 'Blaser R93','UMP' and 'G36C', but in fact they are screenshots. I believe that a proper syntax will group common screenshots together and will not club with a gun image bearing the same name.--SB2296 16:21, 7 August 2010 (UTC)
- Yeah, we should make it a rule and display it in bold letters in the upload file page as well.--SB2296 15:22, 8 August 2010 (UTC)
- Sorry, couldn't reply earlier as I was too busy with CODBO. Yeah, that's fine. As I said earlier we should put a note of it in the upload file page as well (isn't Bunni the only one who can do this?). BTW we already have rule-breaker with EliteCrew.--SB2296 16:16, 10 August 2010 (UTC)
Image:M1917 Enfield Rifle - .30-06.JPG
Originally I was trying to upload this as new version of Image:M1917enfield.jpg and I messed up and uploaded it as a seperate image. Can you delete it at once. Thanks. Also, when I uploaded as a new version of Image:M1917enfield.jpg, it showed it as the old version of picture. I was never good at uploading new versions of pictures. - Kilgore 21:42, 8 August 2010 (UTC)
Help me out on House of the Dead
What would you say this is? :D
Any good guess would help me. My brain is firing out of sync for some reason when I look at these screencaps! ;) MoviePropMaster2008 02:02, 9 August 2010 (UTC)
CW and Die hard with a Vengeance
From what I remember, CW purchased the guns from WS when they were done. There is a lot of internal selling and swapping going on, but only between guys who are friendly with each other. :) Now I annoy everyone ;P LOL but I do loan out stuff to other armories who are short of stuff. :D MoviePropMaster2008 05:49, 9 August 2010 (UTC)
Type 56
I was reading the list of your weapons and noticed you mentioned your Type 56 was "Pre-Ban". Just out of curiosity, are you reffering to the ban on imported Chinese weapons or the ban on automatic weapons? At first I assumed the former but then I realized I've never seen a semi-automatic only Type 56 (not that I have anywhere near enough experience for that to indicate they don't exist). -Anonymous
Reply
Thanks for the clarification. I thought you were talking about the import ban but wasn't sure. In addition to the assult weapons import ban I think there was another ban that prevents any weapons, including sporting arms like the Norinco coppy of the Winchester 1887, from being imported from China. I would have to double check that information though. -Anonymous
PersonOfInterest
What did he do this time?--Alienqueen11 03:45, 27 August 2010 (UTC)