| Error creating thumbnail: File missing Join our Discord! |
| If you have been locked out of your account you can request a password reset here. |
Talk:M1911 pistol series: Difference between revisions
Predator20 (talk | contribs) m (→Additional Variants: not needed) |
|||
| Line 64: | Line 64: | ||
[[Image:SerenityM191A1.jpg|thumb|none|450px|Jayne Cobb's Mocked-Up Custom M1911A1 - .45 ACP used in the film ''[[Serenity]]''.]] | [[Image:SerenityM191A1.jpg|thumb|none|450px|Jayne Cobb's Mocked-Up Custom M1911A1 - .45 ACP used in the film ''[[Serenity]]''.]] | ||
[[Image:P00654 1911 Full Left.jpg|thumb|none|450px|'''World IMFDB Exclusive:''' Screen used Colt M1911 with Nickel-plated and pearl grips - .45 ACP pistol. This non-firing prop weapon is verified as screen used from the film '''[[The Other Guys]]'''. The gun is accompanied by the Galco shoulder holster and clip pouch also used in numerous scenes from the film. This item is currently being sold by [http://www.thegoldencloset.com/ The Golden Closet]; see [http://www.thegoldencloset.com/merchant/merchant.mvc?Session_ID=6ef04a13fbe759cbdcbdc6bc4c4b809f&Screen=PROD&Store_Code=TGC&Product_Code=P00654&Category_Code=OtherGuys here].]] | [[Image:P00654 1911 Full Left.jpg|thumb|none|450px|'''World IMFDB Exclusive:''' Screen used Colt M1911 with Nickel-plated and pearl grips - .45 ACP pistol. This non-firing prop weapon is verified as screen used from the film '''[[The Other Guys]]'''. The gun is accompanied by the Galco shoulder holster and clip pouch also used in numerous scenes from the film. This item is currently being sold by [http://www.thegoldencloset.com/ The Golden Closet]; see [http://www.thegoldencloset.com/merchant/merchant.mvc?Session_ID=6ef04a13fbe759cbdcbdc6bc4c4b809f&Screen=PROD&Store_Code=TGC&Product_Code=P00654&Category_Code=OtherGuys here].]] | ||
[[Image:CaptainPriceSALoaded.JPG|thumb|none|450px|Captain Price SA Loaded - .45 ACP]] | [[Image:CaptainPriceSALoaded.JPG|thumb|none|450px|Captain Price SA Loaded - .45 ACP]] | ||
Revision as of 19:56, 21 December 2010
Additional Variants
Video game appearances of this pistol series
Why is it that the "Video Game appearances" tables have a column named "Passwords"? I don't think it's for passwords to unlock them, because to my knowledge very few video games actually have a password system to unlock weapons. Wouldn't it make more sense to have a "Notes" after the "Mods" section where certain pertinent but miscellaneous information can be written, such as what copyright-infringement-avoiding name it goes under in the game, or whether it is chambered in a non-standard caliber?
I'd like this cleared up. Oh, and someone needs to include a note saying that "mods" is short for "modifications/customizations for the weapon," not "downloadable modifications to the game itself."--Mazryonh 06:20, 23 February 2010 (UTC)
- I agree. Frankly I think both the "Mods" and "Passwords" sections can go, since the latter is pointless and the former's purpose can be adequately served by "Notes". --MattyDienhoff 15:17, 13 March 2010 (UTC)
Colt Government Model Section
With regard to the following sentence:
"Aside from Colt selling the M1911A1 to the US military, the gun was also sold under the name "Colt Government Model" to the civilian market, and called the "Pre-Series 70" guns today."
First, the Colt Government Model was introduced in 1912, and as such, it was originally in the M1911 configuration. When the U.S. Military switched to the M1911A1 configuration in the mid 1920s, Colt began manufacturing their Government Models in the M1911A1 configuration as well. So early Government Models parallel the military's M1911 configuration, while later Government Models (after the mid 1920s) parallel the military's M1911A1 configuration. Additionally, not only pre-Series 70 guns are Government Models. Series 70 and Series 80 guns are both Government Models. In fact, Colt still makes the Government Model to this day in various configurations.
With regard to the following sentence:
"For IMFDB purposes, this can also be referred to as an M1911A1. In this manner, there is no need to list film, television, anime, video games in this section."
It is sloppy to refer to a Colt Government Model as an M1911A1. "M1911A1" is the U.S. Military designation for a particular type of gun, and most of them were not even made by Colt (Remington Rand [the typewriter company] made most of them). I can see referring to a gun as an "M1911 type" or "M1911A1 type" if the manufacturer can't be determined, but when you simply type "M1911" or "M1911A1" you are referring to a U.S. Military contract pistol.
On top of that, the pictured gun in the Colt Government Model section is not even a "Pre-Series 70", it is a pre-enhanced Series 80 Government Model.
--MaximRecoil 21:44, 22 October 2009 (UTC)
- So it's like how we don't call it the Beretta M9, we call it the Beretta 92FS. -Gunman69 03:52, 23 October 2009 (UTC)
- With the M9 vs. 92FS situation, it is next to impossible to tell the difference between the two onscreen, unless there is a closeup allowing one to read the markings. In such cases I would say, if a civilian character is using the gun, it is probably intended to be a 92F or 92FS. If a military character is using it, it is probably intended to be an M9, regardless of what the actual prop is. I would assume that most—if not all—movie and TV props are actually 92Fs or 92FSs, because I don't believe that actual M9s have ever been made available for civilian sale.
- With the M1911 or M1911A1 vs. the Colt Government Model (or other brands of 1911-type guns), it is usually possible to tell the difference onscreen without being able to read the markings. For example, the Colt Government Model does not have a lanyard loop. Most M1911A1s were parkerized, while no Government Models were parkerized. When dealing with more modern Government Models, there are even more differences. For example, starting in 1950, Government Models started coming with a full-shelf thumb safety; while all M1911[A1]s had partial-shelf thumb safeties. Also at this time, Government Models started being given a finish with polished flats and matte radiuses, while blued and Du-Lite (similar to bluing in appearance) M1911A1s had polished radiuses and brushed flats or entirely polished (depending on the manufacturer and/or time of manufacture); and of course the more common parkerized M1911A1s were simply all matte.
- Additionally, the newer Government Models as mentioned above have narrow hammers with polished sides left "in the white", and polished chamber hoods also left "in the white". Many M1911A1s had wide-spur hammers, and the ones that had narrow hammers were fully finished (no polished "in the white" sides) and they all had fully blued barrels, including the otherwise parkerized ones (no polished "in the white" chamber hoods).
- Most of the Government Models you see onscreen from the early 70s to the mid-to-late '80s were actually 9mm versions, though they were usually representing a "forty-five" onscreen. This had to do with reliable functioning with readily available 9mm blanks. Colt introduced the 9mm version of the Government Model when they introduced the Series 70 in the early 1970s, and the 9mm version of the CGM had a lowered ejection port (while the .45 ACP version still had the standard military style ejection port). With the introduction of the Series 80 Government Model in 1983, the .45 ACP version also got a lowered ejection port. No M1911[A1] had a lowered ejection port.
- I'll give an example. In the show Magnum, P.I., his gun is blued with polished flats and matte radiuses; polished "in the white" chamber hood and hammer sides, and a lowered ejection port. It is clear from looking that the gun is a Series 70 Colt Government Model chambered for 9mm (though it was always addressed as a "forty-five" in the show's dialogue); and is definitely not an M1911A1. Recently the gun came up for auction and is now in the NRA's National Firearms Museum, and it has been confirmed that that is exactly what the main prop gun was (serial # 70L33101 to be exact).
- --MaximRecoil 21:58, 23 October 2009 (UTC)
Primary M1911 description
Who wrote this? The historical paragraph (on the background of the M1911) implies that the M1911 was replaced by the U.S. Military AFTER Operation Desert Storm (1991) which is not true. The Beretta M92 (M9) was already approved and adopted by 1985.
Well for a period of time both the 1911 and M9 were in use by the U.S. military,therefore just because the M9 was in service does'nt mean it replaced the 1911 by that time, and for awhile soldiers actualy got to choose which weapon they prefered :o Leadback
==========================
The Beretta M9 officially replaced the M1911 in 1985. They still used the M1911, but they weren't buying anymore. They simply phased them out over the years. Now there are some units in the US military that still use the M1911. The M9 is really only used by conventional military nowadays. For example, the Navy SEALs don't even use the M9 or M1911 anymore. They have the H&K MK23 Mod 0. Which is a purpose-built USP .45. I've even heard of some SEALs using the Ruger Mk. II. It's a .22 target pistol with an integrated silencer on it.
Soldiers were never given the choice to choose. They were given the M9, but many didn't like it. It was big, many could not shoot it accurately, and lots contested the effectiveness of the 9x19 round. Lots of people I work with were in the military around the time of the switch, were given the M9, hated it, and decided just to keep carrying the M1911. It wasn't until they were given an official order that they were forced to carry the M9. And even there, there were times when they went back to the M1911s the military had stored up. For example, out in the deserts. The magazines the military bought were junk, got sand in them, and jammed. The M1911 functioned perfectly. Same thing is happening over there now.
wrong. Special Operations soldiers are given their choice of a sidearm( and assault rifle). 1stSFOD-D has been using 1911s since foundation. infact Larry Vickers (Nighthawk Customs) has worked very closely with Delta Force. Nighthawk 1911s are being used by Delta. 2- the Seals in Vietnam started out with the Ruger Mk II Suppressed. and know one still used the HK MK23. it was fazed out years ago because of how bulky it is. SEALs use the Sig Sauer P226 or USPs. but that is still a generalization. because all SOF have a choice in sidearm Dirtdiver6421 00:20, 7 July 2010 (UTC)
Para-Ordance
Shouldnt these guns get their own page? Sure they are a 1911 varients, but their made by a totally different company.The Winchester 00:38, 25 February 2009 (UTC)
- Yeah, but they're 1911 variants. This is the M1911 pistol series page, and they are 1911s. That's why they are on here. - Gunmaster45
- I would prefer the Para Ordnance series of pistols have their own page due PRIMARILY to the fact that the Paras have a whole slew of different calibers that other M1911 makes and models don't have MoviePropMaster2008 06:40, 11 June 2009 (UTC)
What calibers does para have that other 1911 manufactures do not have?--Spades of Columbia 01:22, 7 July 2010 (UTC)
The M in the page title
Correct me if I'm wrong, but isn't the M in the page title incorrect? These are Colt 1911s (or 1911a1s, etc.), not Colt M1911s, unless referred to by US military nomenclature, just the same way that a Beretta 92f is an M9 only to the US Army and a SIG Sauer P228 is an M11 only in USAF terms. Just because it's the model of 1911 doesn't make it an M1911, any more than a '67 Shelby GT500 is an M67 Shelby GT500.YourMessageHere 08:09, 1 April 2009 (UTC)
- No. The Colt pistol was formally adopted by the Army on March 29, 1911, thus gaining its designation, M1911 (Model of 1911). Only examples or prototypes prior to the year 1911 would NOT have the M designation (which is extremely rare). Between the years of 1907 and 1910 the Colt pistol was constantly being modified and re-designed to win the Army's trials for adoption of a new handgun. The gun was only mass produced AFTER winning the Army's pistol trials. The Beretta 92FS was already famous world wide and was commercially available as the 92F/FS for YEARS before the Army adopted it. Every 1911 design came AFTER the M1911 (aka Model of 1911) so it is the correct nomenclature. MoviePropMaster2008 07:20, 10 June 2009 (UTC)
Using "1911" to refer to any and all pistols based on the M1911 design has only been popular for about fifteen years. Prior to that, the vast majority of such pistols were Colts, and were usually called "Colt .45s", even if they were pistols made by wartime contractors like Remington Rand. Those commercial guns that weren't made by Colt, as made by Vega, Randall, Federal Ordnance, Essex, etc., were called "clones", as they were generally close copies of the Colt. When makers started adding previously "custom" features to production-line guns, and branching into areas that Colt hadn't, a new name was needed, and "1911" became popular. The problem that I have with the various names on the site is the mixing of military and commercial designations; a gun cannot be a "M1911A1 Government Model", as M1911A1 is a military designation, and Government Model is what Colt has always called the civilian version of the "M" military pistols. Colt has made M1911s (1912-circa 1924), M1911A1s (circa 1926-1945), and Government Models (1912-date), but you can't mix or combine those names without confusing the issue.
Caliber question
I thought I would ask permission before making this change considering how important this article is: in the specifications category the caliber is listed solely as .45 ACP. I was wondering whether or not that should be changed to include .380 ACP, .38 Super, 9mm, and .40 S&W?
No, since the ORIGINAL Colt M1911 is .45 ACP Caliber, it should stay like that, since copies of the M1911 maybe have different calibers those should be put on the "copy" section
Agreed --PunisherDave
M1991 Series
I was wondering: what exactly is the difference between the 1911 series and the 1991 series? -Gunman69 17:18, 19 July 2009 (UTC)
Colt introduced (announced) the M1991A1 in 1991 as a sort of economy version of the Government Model, resembling the military M1911A1, and with the serial numbers picking up where the military gun left off after WWII. The gun was made in that form until about 2003, at which time the finish was changed to polished blue rather than matte blue, and the black rubber grips replaced with checkered wood.
- I heard a guy explain on youtube that 1991 got "extra safety feature" which blocked firing pin movement entirely when trigger was not pressed; allegedly this modification appeared after a incident involving police officer accidentally killing suspect while snapping him with the gun. However, this modification somehow managed to eject firing pin from the slide during decocking so only few people liked it --Cover72 21:59, 20 January 2010 (UTC)
Terminator 2
It was my understanding that the 1911 used in the film was a custom Colt frame with a fitted Detonic slide. Was it a combatmaster slide? 65.29.239.251 09:33, 13 March 2010 (UTC)
blank firers / K911
I've added/moved blank firing Kimar 911 to the bottom of page as told by MoviePropMaster2008 ("Non-firing replicas of the M1911 belong on the bottom of the M1911 page. Thanks.")
But I wonder, shouldn't there be an entire sub-category of blank firers (with K911 being sub-section of this) in order to distinguish blanks from the real ones? It might look confusing this way. And also, I made multiple photos of K911 for what I thought would be it's page here including disassembled weapon photo, so perhaps these unused ones might be deleted? --Cover72 21:46, 20 January 2010 (UTC)
Strayer Voigt Infinity
This gun is using a frame from STI, they call that frame the 2011, it's double stacked. And is made from steel and polymer.
- are Strayer Voigt Infinity custom built guns? or just have alot of models? Rex095
The modular frames look exactly like those used by STI. http://www.sviguns.com Don't know if they collaborate or something. They (SVI) have more optional grips than STI.
Both companies reside in Texas.
Does anyone know the mag cap for a Strayer Voigt Infinity in 45acp? - captain snikt
Police service pistols
Before the 90s were American Police ever issued the M1911, or were they're only given to the FBI and SWAT team?
- Some regular state/county/municipal departments might have used a 1911 as a standard duty-weapon before semiautos came into heavy use following the eighties, but I imagine that's a very low number. I certainly don't know of any specific departments myself offhand. Not that many departments use 'em much today. As a 1911 generally was considered a large pistol with a fairly powerful round it wasn't considered easy to use and handle by regular officers. Same general reason why departments in older times stuck with .38s over .357s - The .357 was generally considered too powerful for standard-duty officers. As such, most police departments used 9mms when they first went to automatics in the eighties as there were few semiauto calibers with lower recoil impulse and power at the time than .45ACP.
Some other police units might have used 1911s when it suited them - Homicide detectives in our county's police dept. carried 1911 type pistols, though I don't think that was the county's standard sidearm for uniformed officers. StanTheMan 02:04, 11 April 2010 (UTC)
- There's another reason, besides caliber, that the 1911 wouldn't have been too popular in the old days - it's a single-action. Before DA-only became more acceptable (i.e. Glocks), most LE departments preferred handguns that were SA/DA. Almost all police revolvers used prior to the 1980s, like the S&W Model 15 and 19, or the Colt Python, were single- or double-action. This bias continued into the 1980s when a lot of departments started adopting the Beretta 92F and the 3rd Generation Smith & Wesson autos. Now that Glocks have been around long enough, DA-only is finally becoming the standard. But SA-only is pretty much a no-go to any LE agency, and that's the way it was even before the 1980s. -MT2008 02:30, 11 April 2010 (UTC)
Isn't Glocks SA-only? The firing pin is cocked by cambering a round?
Would a Smith and Wesson Model 39 or 639 or Colt Commander be more acceptable for police use back then?
- To MT, that's a good point as well. SA weapons do require a lot of training and familiarity to operate effectively and safely, and as such, again, weren't considered practical for regular police officers either. Very good to point out. If I'm not mistaken, that's one of the main reasons why the 1911 fell out of favor in the Armed Forces as well - the fact they required extensive training and familiarity to use and carry safely. DA weapons are easier to train and operate with. Very true.
As for the Glock question, no, Glocks are actually DA only.
As for actions - In a Single-Action (SA) firearm, the hammer must be manually cocked to a firing position prior to pulling the trigger. Just like revolvers of the old west. Double action firearms will both cock and release the hammer when the trigger is pulled. SA/DA firearms use double-action by default, but feature an externally accessible hammer to allow single-action style firing (by cocking the hammer back and then pulling the trigger). Modern revolvers are perhaps the simplest examples of this.
DAO (Double-Action-Only) firearms only fire by double-action as they don't have an accessible hammer for single-action cocking. Such as Glock and various other semiauto pistols.
So if you have empty casing in the chamber, an pull the trigger several times, you would hear a loud click every time because the firing pin would be cocked every time? That's what happens in a DAO gun. If not, it's a SAO.
And on the last question, yes the Smith 39/59 pistols were used by police departments back then. Illinois State Police used the 59 back in the 60s/70s if I remember my Jane's Gun Recognition book correctly. StanTheMan 05:07, 12 April 2010 (UTC)
- Correction, Glocks are not DAO. They fire from a half-cocked position. When you dry fire the gun, the hammer falls and must be recocked by racking the slide, it does not cock by double action springs. That's why the have a slightly heavy trigger pull, they are half cocked, and are brought to full cock and dropped by pulling the trigger. - Gunmaster45
- Bah, how did I miss that.. StanTheMan 20:05, 24 October 2010 (UTC)
- Correction, Glocks are not DAO. They fire from a half-cocked position. When you dry fire the gun, the hammer falls and must be recocked by racking the slide, it does not cock by double action springs. That's why the have a slightly heavy trigger pull, they are half cocked, and are brought to full cock and dropped by pulling the trigger. - Gunmaster45
I think I read that Tacoma, WA police carry 1911s as standard issue service weapons.
Versus modern pistols
One thing I've noticed about this pistol is that almost everyone loves it, as though it were the best, most versatile handgun ever made. But really, what makes this thing, almost 100 years old now, any better than any modern pistols? Really, modern pistols can fire the same rounds, bigger clips, better design, picatinny rails, etc.--Zblayde 21:54, 21 April 2010 (UTC)
Familiarity, accuracy, ease of getting parts, feel, simplicity (yes I know there are designs that are simpler, but for what this pistol is, it is simple), many different makes and models of the 1911, modularity, traditionalism. There are many makes and models of the 1911 style that have the same features as many modern "wonder guns". Want more ammo? Get a Para Ord P14, ditto for DA, and DA/SA. Want a 9mm/ 10mm/ etc? there are many types of 1911 platform pistols ranging from .22lr to .44 Magnum. A quote I heard about the 1911 a few years ago is "It's like a '32 Ford Hotrod, its cheap, reliable, powerful, fun, and is easy to make it your own. Just don't think you'll get much mileage out of a tank of gas." Now tell me can you put custom grips, barrels, sights, slides, frames, triggers, hammers, finishes, safeties, slide releases magazines, etc etc etc on a Glock, XD, SIG, Beretta, etc? Maby a few of those, but at what price, and can you do it all? -Ranger01 08:51, 22 April 2010 (UTC)
- Really, modern pistols can fire the same rounds, bigger clips, better design, picatinny rails, etc.
- Funny, several pistols I can think of that fit that criteria are little more than updated 1911 pistols. StanTheMan 20:08, 22 April 2010 (UTC)
"bigger clips"
- Fail. I believe you meant Magazines. The Wierd It 21:28, 22 April 2010 (UTC)
ya Unless your talkin about a Mauser broomhandle (which you're not) I would prefer if you said magazine instead of clip
- Actually, that's another thing I'm questioning. Really, what is the difference between the detaachable box magazines and clips? I mean, clips hold bullets for easy loading, right? SO wouldn't modern detachable magazines be classified as clips too?--Zblayde 20:17, 6 May 2010 (UTC)
- Simplest way I can put this - a clip loads a magazine. The magazine is what the gun feeds from - NOT THE CLIP. It just so happens that on some guns, the magazine is affixed to the weapon (the M1 Garand and the Mauser, for example). Thus, users have to use clips to reload them. On, say, a M1911 or an M16, the magazine falls out, thus allowing the user to swap in a new one when needed. A magazine could hold a clip, if so designed...but that particular road is one-way only. --Clutch 20:47, 6 May 2010 (UTC)
- Actually, that's another thing I'm questioning. Really, what is the difference between the detaachable box magazines and clips? I mean, clips hold bullets for easy loading, right? SO wouldn't modern detachable magazines be classified as clips too?--Zblayde 20:17, 6 May 2010 (UTC)
- The "clip vs. magazine" distinction is something that really needs to be clarified, and one of the reasons why I asked for the "general information" section in the first place. Hopefully someone can make a good article there showing the various type of bullet clips and why they should not be confused with magazines. By the way, revolvers when not loaded manually use bullet clips. --Mazryonh 05:03, 7 May 2010 (UTC)
considering that this page is dedicated to the 1911 which is generally made in .45 does anyone else find it somewhat stupid that our military and most police departments are using handguns that have been known for their lack of stopping power. there are better handguns out there that hold a generous amount of .45 ammunition anyway. for example the Nighthawk FLX holds 12-14. the HK USP/HK45, and the Infinity handgun line are double stacked. and even if most .45s hold 7-10 isnt that enough in most scenarios. 7 .45 slugs does the work of at least 20. Dirtdiver6421 00:26, 7 July 2010 (UTC)
Its the same reason that police used the .38 Special for so many years even after the .357 came out. Politics, logistics, ability to handle the round, etc etc... -Ranger01 20:30, 7 July 2010 (UTC)
- With regard to caliber, police need rounds that can penetrate car bodies, doors, walls, etc. .45 rounds are not known for penetration. Also, while the .45 round is more effective against soft tissue than 9mm and .40 S&W rounds, anyone who tries to claim that 7 .45 rounds can do the work of 20 9mm or .40 rounds is completely dillusional. Watch ballistic test videos. A .45 slug entering the body does more damage than a 9mm round entering the body. If you try to claim that one .45 wound is more damaging than 2 9mm wounds with any decent grouping than you clearly have no understanding of physics or human anatomy.
But the fact remains with a 9mm you dont want him dead in the half hour it will take for him to bleed out. you want him dead NOW. with the .45 hes going to feel it. he aint gunna get back up. with the 9mm he might just keep firing.
- Depending on shot placement. A 9mm slug to the heart or any of the major arteries surrounding it will cause death within several seconds. The same is true of a shot to most areas of the skull. .45 does have increased lethality over 9mm, but that degree of superiority has been greatly exaggerated.
Variants NOT listed with any film/TV/game appearances
- I've taken it upon myself to remove several listed variants that had no list of anything that they've appeared in. Guns posted that didn't say they were in anything - Not one movie, TV show episode, video game, nothing. A couple of which I don't think have appeared on anything and seem to have been put up just for the hell of it.
Now I know we have a lot of 1911 variants on the page, but the page is not intended to show/describe every variant of 1911 ever made, but only those that have actually appeared in something, as quoted by some of the admins. I just find it a bit annoying to have to scroll down the page and see numerous 1911 pistols that have nothing listed under them (Again, with some looking like they were just added for the sake of being there), and I'm sure I'm not the only one.
Anyway, clearing said sections out now. If it seems like an unusual or otherwise noteworthy variant, I'll add it to the 'additional variants' section below. Bottom-line, if it ain't actually been in anything, don't add it, no matter how cool it is or whatever. If it has been in something, then next time, don't half-ass - If you're going to bother with the effort of putting it up in the first place, do it 100% and say what it's appeared in. Thanks. StanTheMan 03:18, 5 June 2010 (UTC)
Kimber
in the Kimber Warrior section it is listed as "Warrior II", which is wrong, the Warrior is built to full military specs and never got the "II" desinated saftey system...so it is just a Warrior because kimber only puts the II on the models they put their special saftey on.--Spades of Columbia 19:39, 7 July 2010 (UTC)
Controversy igniter
I am fully aware that what I am about to say will probably ignite the greatest firestorm of controversy this site has seen in a while. I have fired several 1911 pistols and found them to be a good, solid design. That said, it doesn’t change the fact that I think this is undoubtedly the most overrated firearm in history. Throughout the entire gun community there is the consensus that this is the absolute greatest thing ever conceived by the mind of man and anyone who says anything different is a blasphemer. Again, I am not saying it is a bad pistol, I just don’t think it is best (I won’t say what my top choice is for fear of causing even more indignation to come my way). Though even if it were the undisputed best pistol design around, I still don’t think it would be so significantly greater than other designs as to warrant being the object of the worship and masturbatory fantasies of every gun enthusiast in the world as it currently is. That’s my two cents, I await the fallout.
- I smell a troll.--PistolJunkie 17:18, 27 July 2010 (UTC)
I'd say he's not because he seems to explain his point. At least his reasoning isn't 'this gun sukzz' BeardedHoplite 17:42, 27 July 2010 (UTC)
- My main reasoning is that the weapons are predominately single action only, which necessitates that they either be carried condition three (which makes the pistol slow to bring into action), or condition one (which many consider unsafe). The double/single action and double action only systems have become omnipresent in most modern combat pistols for good reason. Additionally, while a generally reliable design, many other pistols have surpassed 1911 models in ruggedness and reliability. Another thing that I find odd is the vast variety of weapons that are claimed to be “1911s.” For instance, I have seen subcompact, double action only, double-column “1911s” in many calibers other than .45acp. At this point the only common feature between these weapons and the original Colt 1911 design are a loose aesthetic resemblance. The internal mechanisms maybe similar as well, but many other pistols share a far greater functional similarity to 1911s yet do not bear the moniker. At what point does a gun cease being a “1911” and become something simply trying to cash in on a famous name sake?
It is human nature to emulate successful designs in the hopes of getting a piece of that pie, especially in the modern business world. Less-refined terms for this behaviour include "jumping on the bandwagon" or "riding a gravy train." It's nothing new now in the firearms industry, what with all the AR-15 variants, Glock knock-offs, and (of course) countless "1911-type" pistols around. What defines a "1911-type" pistol is really matter of personal preference.
I would, however, agree that it's foolish to fetishize a type of firearm or a firearms manufacturer just because of its track record or Public Relations budget. There is no such thing as the "perfect" weapon in the real world--every design involves tradeoffs, and that's even before you include the "human factor." Designs can always be improved. What matters most is what you can use the most effectively in a consistent manner. And if you can't, then you ought to get yourself another weapon or train more.
Speaking of "best pistol ever," I remember how H&K tried to label their 4.6x30mm pistol as "the Ultimate Combat Pistol," but it got unceremoniously cancelled, because of "inadequate ballistics in a handgun format." So much for "Ultimate Combat Pistol"--now it joins the legions of "Useless Cancelled Pistols" that came before it. Perhaps it could have had a chance if it were a machine pistol instead, dubbed the "MP7 UltraComPact," in essence an MP7 PDW in handgun format. --Mazryonh 00:34, 30 July 2010 (UTC)
- What I would like to know is what is it about the 1911 that supposedly makes it the best. I've heard people say it is the greatest pistol ever for more than a decade yet never explain what specific features or advantages it has that make it so good.
You should head on over to the forum and ask that question: "What makes the M1911 pistol so great compared to everything else, and when does an M1911 stop being one and start being a pistol just pretending to be one?" I'm sure there are more people there who could answer your questions better than what you could get here. --Mazryonh 22:24, 30 July 2010 (UTC)
What makes the 1911 the "best"? There are many reasons for the following it has. I am of course referring to the original 1911A1 model, not the double stack nor double action variants. For one, the single action trigger is extremely easy to train with and use by a lot of people. Second, it has redundant safety systems in place. Even with the manual safety off, it will not fire unless the grip safety is fully pressed, though this safety system is seen by a few as a con of the design. Third, it utilized a single stack design. That coupled with the angle of the grip is a very comfortable for a majority of the people. The degree of the grip angle was chosen because, for a lot of people, it is a natural point meaning that one could close ones eyes and bring the pistol up and have it pointing directly at the target. Fourth, it fired the .45 ACP. The .45ACP is a proven manstopper especially when compared to the other rounds utilized at the time of its adoption and until the development of reliable hollow point designs. Lastly, I would argue that compared to many other designs, such as the Mauser C96, Luger,etc..., the 1911 was easily field strip as the pieces of the pistol were designed to aid in the stripping down of the firearm. Compared to todays plethora of firearms, the 1911 is no longer the only pistol to chamber effective rounds or reliability. Why is it still popular then? Because some people still favor the 1911 design. Overrated, I don't think so. There is a reason why it is still chosen over other designs. Is it the end-all-be-all of pistol design? No, I would say it isn't. Anyway, from everything I've read, personal experience, and research that is what I have come up with. GaBoy45 21:15, 4 August 2010 (UTC)
- Everything you have described establishes that the gun is a good design, perhaps the best gun around when it first came out, but does not explain it's enduring following. The grip may be confortable for many people, but that is far too subjective to explain why so many people (with so many different hand sizes) still favor this gun. It's single stack magazine make it a confortable target and practical concealed carry weapon, but the limited capacity it offers can be a death trap in a combat weapon (which many still claim the 1911 is the quintessential example of). The .45 ACP is a great round against soft targets, but does not offer very good penetration or long distance acuracy. And with the isistance on reliable "Soldier Proof" weapons in most of today's militaries, many modern pistols are more reliable and easier to strip than the original 1911s. I don't deny that the 1911 was most likely the best pistol in the world when it came out and for a few decades after, but I don't think it still warrents that praise anymore, yet almost every gun Television show, magazine, website, etc. seems to constantly proclaim its supremacy.
To answer your first point. The single stack, thin handgrip is easily usable by people of differing handtypes. You say its subjective but isn't how something feels in someones hand subjective? For example, the M9/Beretta 92FS has a thick grip. Bigger hands have no problem with the grip but smaller hands do. The slim 1911 grip can be used by big hands or little hands. The grip angle is something else that many people find comfortable. You second point that you made was the single stack "death trap". You say that the single stack is a liability. But capacity isn't everything. 7+ rounds of .45 ACP is good. The .45ACP has a well known reputation for one shot stops. The 9mm of the Beretta 92 or Glock 17 does not have that reputation. As for the .45ACP, it is not meant to penetrate body armor, neither is the standard 9mm, but it is accurate over long distances. There are very few pistol rounds that are meant to penetrate body armor of vehicle armor, which is what I think that you are getting at. If you draw a pistol in a combat zone, you are already in deep trouble or in a position where a high capacity is not needed, i.e. MP's. Anyway, a pistol is not meant to be accurate at long distances so the point is moot. As for the "Soldier Proof" weapons, that is just a cheap way out of training soldiers correctly, as they did with the A2 model of the M16. A milspec 1911 is just as reliable as newer designs. One such argument is that the 1911 was only tested for 6000 rounds with no failure before cleaning while Glock for example is tested at 30,000 rounds. What soldier won't clean his sidearm after 6000 rounds? What battle involves firing 6000 rounds out of a pistol? If you can't see why the 1911 design is praised and still being used then I can't help any further. The 1911 design has many good points that apparently many people still find better than other designs, and many still find the 1911 a proven and effective design.GaBoy45 22:52, 4 August 2010 (UTC)
- Apparently I wasn't clear when I rebutted you last time. The single stack is confortable for people with small hands yes. However, people with larger hands, and even some small handed people, have no problem with thicker grips and so the capacity limiting single stack serves no purpose. The grip angle is a completely subjective feature and so it is imposible to argue that one style is better than another. What matters more is simply what one is used to. You are right that 7-9 rounds of ammunition and 6000 rounds before cleaning is more than adequate for most applications, however my point wasn't that the 1911 is bad (it is a good weapon) but simply that there are better guns out their. 7 or 8 rounds may be enough for most encounters, but having 12-17 rounds and being able to fire 30,000+ rounds before cleaning is an advantage, whether or not one will utalize those features often. Also, when I referenced penetration I had things like doors, walls, and car bodies in mind, not armor. The .38 Super cartridge was specifically developed because the .45 could not penetrate car bodies effectively. Your previous post all focuses on arguing that the 1911 is an adequate combat pistol which I completely agree with. My whole point is that the features you mentioned do not make it the best pistol around. When I first began this conversation I stated that the 1911 is not a bad gun, simply that with all the pistol designs that have emerged in the past century it is no longer the greatest pistol in the world, yet nearly everyone in the gun community (yourself clearly included) still claim it is for no other reason than people like its grip (which is subjective), its caliber (which is used in many much modern modern firearms), and its history (which can easily make it a favorite gun but can not be used as justification for it being the best).
You were arguing the design flaws but it is the design that is one of the big reasons it has such a following. Since you are arguing one view against the other. Why a lot of people think that it is the best. The design is one reason, history is another, the round it fires is yet another reason. I actually don't think it is the best I was merely stating the reasons that it is popular and why people say it is the best. I like the Beretta 92fs for its grip and certain design attributes and the Glock 21sf for different reasons. Would I object to using the 1911 in combat. No. Would I use the Beretta 92fs in combat with FMJ ammo? Not if I didn't have to. With HP ammo, I wouldn't hesitate to use the Beretta. But even your view of other designs being better is subjective. If a pistol, rifle, shotgun, etc...is reliable and fires a moderately effective round then it is a good design. What makes it the best is subjective as far as it goes. What one pistol may be best at is what makes it worst at something else. There is no way to objectively define the "best" just what is better than something else.GaBoy45 00:17, 5 August 2010 (UTC)
- I agree. I don't have any gun in mind that I think is indisputably better than all others. The features I pointed out I did so to demonstrate that in certain aspects the 1911 is inferior to other disigns, not that said other designs are the perfect weapon. Every design is a give and take of different features. Because of this, my main complaint was a pervaisive belief that the 1911 is unquestioningly the greatest gun ever (I have heard that phrase Verbatim in many issues of Guns & Ammo). Is it better in some aspects than double-collumn, double-action 9mm pistols? Yes. Is it better across the board? Absolutly not. I apologize if at any point I have come across as confrontational, it is just that I have heard so many people assert the 1911's complete supremacy so many times that it has really gotten on my nerves and I wanted to know what others thought.
Google "1911"...then google any other gun...now tell me which one has the most varieties...which one has the most after market parts and pieces for the specialist. Which one has the most surplus parts. Its so popular and so famous because if you wanted to you could make one look like no other one or you could make it look like that one in your favorite movie. Not only that but all the diffrent calibers from 45cal to the awesome and unbeatable 10mm. Plus they are sexy as hell. To sum up you can basically have a beautiful, functional, all steel combat pistol in your choice of caliber and its going to feel like a dream in your hands.--Spades of Columbia 00:48, 5 August 2010 (UTC)
- The madness of crowds surely knows few bounds--just look at how the various bottled water companies manage to make a killing selling what is essentially tap water, because people will do often do things just because enough other people tell them it's a good idea. Then again, I suppose the "cult following" that some pistol-types have over others is due in part to the following facts:
- Pistols are rarely if ever primary combat weapons anymore, with the exception of law enforcement.
- Few people who routinely carry pistols have to regularly use them in gun battles against opponents who are earnestly trying to kill them.
- Therefore there aren't many occasions for most pistol-carriers to test their assumptions in the most revealing field of all--life-or-death situations. So depending on your circumstances you can go a lifetime without ever putting the hype in the harsh light of real return-fire. I'd bet on the M1911-type (the "pure" single-stack .45 ACP M1911s) pistols selling so much mostly because of its hype and history, and that it is, at its heart, a serviceable (though hardly optimal) weapon. Given how many clones there are, however, I really must wonder what would have happened had Colt become the sole copyright holder for this pistol type--would we see more innovation that way, or just countless clones of some other pistol type? Perhaps a more revealing, specific question would be "How does the M1911 platform compare to the Glock platform or CZ-75 platform?" That could work because all three are successful pistol types offered in multiple calibers, including 9x19mm, .45 ACP, and 10mm Auto.
- Bottom line? The "pure" M1911 works, but we can certainly do better. --Mazryonh 04:07, 5 August 2010 (UTC)
- Exactly
Ok, well answer me this then. Why if the 1911 is all hype and legend does MEUSOC still issue 1911s? Why does Delta give out a stipend to have an operator buy his own custom 1911? Why does the FBI HRT use 1911s? and LAPD SWAT? and so many other groups that use pistols? The reasons the wonder 9s came into popularity are lower recoil (marginal), size (marginal) higher capacity (less training in marksmanship), weight (long since gone by the wayside), to match ammo with other NATO countries (Military), and hype/ cool factor (civilian). The 1911 has served admirably (in one capacity or another) with few major changes to the platform for almost 100 years. The Beretta, Glock, CZ-75, etc. have been redesigned and "improved" since they came out just to try and match the 1911s in popularity, reliability, etc.-Ranger01 17:30, 16 August 2010 (UTC)
- Sure thing. How many of these operators you mentioned fulfill the conditions I mentioned above, namely that they regularly use pistols as their primary combat weapons instead of SMGs/PDWs/Rifles and often engage in gunfights with earnest, aware opponents? And other combat platforms for the .45 ACP won out, such as the Mk. 23 SOCOM pistol which won out over Colt's version. The "improved" Beretta, Glock, CZ-75 you mentioned have done so to fit consumer demand and market competition, but national armed forces aren't that commercial and competitive most of the time because of how many contracts and vested interests are running the show. I simply said that the "Pure" M1911 platform works when used, but it can be improved, otherwise the Mk.23 SOCOM wouldn't have won the OHWS program. --Mazryonh 02:05, 8 September 2010 (UTC)
- A lot of Special Forces don't even use the Mk. 23 due to its bulky and awkward size. Many Navy SEALs opt to use 9mm SIG-Sauer Pistols
H&K won the competition because they strictly adhered to all of the requirements (some of which were asinine), and they put in the best bid. When USSOCOM received the Mk. 23 they got exactly what they asked for but not what they had actually wanted. The SEALS who used it complained about how it was too big, heavy, and its cons outweighed its pros. They tried to pawn them off on the ARMY but no one there would touch them, so most of them went back to H&K. As with all things military, big brass does not listen to the guys who actually have to use the equipment until its too late.-Ranger01 06:13, 8 September 2010 (UTC)
I would like to toss my thoughts into the mix. Being a Brit getting a hold of a real firearm is harder than getting away with stealing the Popes hat, but I am an avid airsofter and I have held and fired many different types of airsoft pistols ranging from HK USPs, to Glocks, to Berettas, to SIGs. But I still go back to my 1911s to which I have 2 (I'm awaiting delivery of a third). I don't have tiny hands but I don't have big bear hands and the 1911 design feels right in my hands. I use a weaver stance and the 1911 is the best pistol for hand placement in that stance, I had an issue with the Beretta that sometimes my thumb could slip onto the slide locking mechinism and prevent slide lock. With Glocks they felt too top heavy for me, maybe it's how the airsoft Glocks are designed and it's not like that on the Real steel. I used a SIG for quite a while as that felt pretty good, but as soon as I picked up a 1911 I needed one. After a little practice I can draw, remove the safety and bring the pistol up to the target in a little under 2 seconds. Why do I like the 1911 so much? It's all about the placement, the safety is right by your thumb so when you draw it you can use one motion to bring the pistol up and deactivate the safety. I found the Beretta to be a bit of a fumbling job deactivating the safety mid draw. Why the 1911 design is still praised isn't down to some cult following, it's down to simple ergonomics, it looks great, the functionality is great, the placement of everything on the pistol is perfect. I saw someone post that they would rather be able to fire 30,000 shots and not have to clean their pistol rather than 6000. I don't know about you but if I only fired off one shot from my pistol in a battle I would still clean it to make sure nothing is going to cause a problem next time. Better to be safe than sorry. --Cool-breeze 17:19, 17 November 2010 (UTC)
Ballester-Molina
The Ballester-Molina should not be included in the 1911 page. It's not a 1911, only the mags and barrel interchange. Internally it's based on the Star Model A, which has significant differences from the 1911 in terms of lockwork. Unless anyone objects I'm going to create a separate page for it. - Nyles
Hello there,
This is a question for the webmaster/admin here at www.imfdb.org.
Can I use part of the information from this blog post right above if I give a link back to your site?
Thanks, Daniel
Dreamworks Animation
When are you guys going to add animated films from Dreamworks like Monsters vs. Aliens and Megamind, because they have guns used by police and the military.
Just because there are guns in it doesn't mean it gets a page here. Are they recognisable as real guns, or are they stylised ones? The Wierd It 09:58, 14 November 2010 (UTC)
They are real guns in the animated films, like in Monsters vs Aliens, the soldiers used some M16 rifles to shoot at the alien, and in Megamind, the police uses rifles and pistols on aiming the villain, who is walking.
OK, I'm going to assume that you haven't read the Rules, Standards and Principles page, most notably this section. Read that, then check back. The Wierd It 19:36, 14 November 2010 (UTC)
But wait, why do we have video game pages then? Firearms in them barely resemble real ones --Jackbel 19:47, 14 November 2010 (UTC)
Ok sorry, no big deal, lets not add cartoons yet, because they have to wait.
- @Jackbel. Because in video games you can clearly identify the guns, and no the good ones do not just 'barely resemble real ones.' As a video game person you should know this, unless Australia has weird rules about depicting guns in video games. The reason cartoons are generally not allowed is because unlike anime, most cartoons have a generic silouette of a 'gun' while most animes have enough detail to be able to determine what guns was used. Think Ghost in the Shell or Cowboy Bebop.--Gunkatas 13:52, 15 November 2010 (UTC)
.45 Blanks
I've read a lot here that .45 blanks used to be unreliable. I was wondering when they started to become a bit more reliable and why they were unreliable? I can't find that anywhere.
I thought it wasn't really the blanks being unreliable so much as it just being easier to blank-convert a 9mm than a .45. The Wierd It 10:29, 2 December 2010 (UTC)
.45 pistols require more recoil force to cycle their actions than 9mms. Since blank rounds have virtually no recoil, .45s are much harder to convert to use blanks.
Ah right. Is there some new way of converting them now because I've started to notice that in recent years there have been a lot of films using .45 ACP versions of pistols that are also chambered in 9mm. Die Hard 4.0 for example, McClane as a P220 in .45 ACP. --cool-breeze 17:37, 2 December 2010 (UTC)
- Is it explicitly stated that the prop gun was chambered in .45? The Wierd It 21:16, 2 December 2010 (UTC)
- "Is it explicitly stated that the prop gun was chambered in .45" We have a pic of the actual screen used gun and is listed as .45 ACP. I think all newer P220s are chambered in .45, only some of the older ones were chambered in 9mm and .38 Super. Also the .45 being unreliable with blanks. I don't think it encompassed all .45 chambered pistols. I think it was only in the 1911 platform. With the 9mm being a much smaller blank and having the large ejection port made for the .45 it was easier to eject them.--Predator20 22:09, 2 December 2010 (UTC)
- Just checking. Especially after the whole issue with the Glocks. The Wierd It 23:54, 2 December 2010 (UTC)
Long (and detailed!)story short. For a 1911 to fire blanks reliably you must first drill and tap the barrel for a blank adapter, then taper the barrel hood, then grind off the locking lugs, and remove the barrel linkage. Once that is done, the testing for a reliable adapter and blank combo ensues (you may or may not need to enlarge the ejection port too). I figure its pretty much the same with other pistols...-Ranger01 19:11, 2 December 2010 (UTC)
That sounds like a very complex process. I'm assuming if you do that well though the 1911 will cycle blanks as well as 9mm blanks. --cool-breeze 01:28, 4 December 2010 (UTC)
I read an article in a gun magazine a few years back about blanks and it said that it comes down to the casings used. According to the article, blanks are made from rifle brass because it has to be long enough to be crimped and still be long enough to be the length of a real cartridge. The problem with .45 acp ammo is that until recently there was no rifle brass in .45 diameter that could be used for blanks. I remember reading back when "Miami Vice" was on that Timothy La France had brass custom manufactured in .45 for blanks. -- David, 3 December 2010 (well, its the 3rd where I live)
Laseraim Series III?
So what is this thing?
It looks more like a CZ derivative than a 1911 derivative to me... Alot like a mashup of CZ, S&W, Sig, STI, etc..-Ranger01 06:51, 11 December 2010 (UTC)
- It draws a little from the S&W series (namely the safety) and CZ-75 (in terms of grip shape), but technically it is a M1911 derivative, they just didn't make many of them.--PistolJunkie 07:15, 11 December 2010 (UTC)
Used to see these in tv shows during the late 80s. the later model was the first pistol I ever saw with an integral accessory rail on the dust cover, although that was in a catalog. David. 11 December 2010
- THIS Laseraim was photographed for the Haunted (2002) page since it was used in an episode. If you guys read the Haunted (2002) page, for which this IMAGE was originally shot for, the description says: Laser Aim was yet another manufacturer who built ported .45 ACP pistol based on the original M1911 design, but incorporating elements of the BHP and the CZ-75 into a new design. The unique feature of the Laser Aim was a hole cut out of the trigger guard ahead of the trigger to mount a laser. Since the production ended for this pistol, smaller lasers with better battery life have been invented. By the late 1990s LaserAim had gone out of business and had sold their patents to AMT. Hope this sheds some light on the piece. It is a new weapon influenced purportedly by M1911, BHP and CZ designs. :) MoviePropMaster2008
Ah, that explains it. Could have saved myself about 2 hrs of google searching if I'd looked up the image uses hah.-Ranger01 23:13, 11 December 2010 (UTC)