| Error creating thumbnail: File missing Join our Discord! |
| If you have been locked out of your account you can request a password reset here. |
User talk:Orca1 9904: Difference between revisions
Kyrottimus (talk | contribs) No edit summary |
Kyrottimus (talk | contribs) No edit summary |
||
| Line 22: | Line 22: | ||
When you get a chance, also check your ICQ, I added it to the list and sent an authorization request. | When you get a chance, also check your ICQ, I added it to the list and sent an authorization request. | ||
All Ruger Mini-14's are chambered in ".223 Rem" (as exactly etched on the receivers. I have a Police-turn-in GB and can take a Screenshot if you need me to). There is a difference (look up SAAMI or Mil-Spec | All Ruger Mini-14's are chambered in ".223 Rem" (as exactly etched on the receivers. I have a Police-turn-in GB and can take a Screenshot if you need me to). There is a difference (look up SAAMI or Mil-Spec. 5.56mm is slightly larger. They both use the exact same casing dimensions, though the 5.56mm grade are usually more regularly annealed and tempered. 5.56mm are also a bit "hotter", which is where the military comes in. .223 was developed by Remington Peters, and adapted by the Military (who uses metric now) as the 5.56mm. If a rifle has "5.56mm" stamped on it, rest-assured it can fire either 5.56mm or .223 rem without a problem (so long as the ammo is quality). If a rifle has ".223 Rem" stamped on it, usually you can only use .223, as the hotter pressures created by the 5.56mm and slightly different bullet profile (not cartridge, just bullet) can cause problems. The Ruger Mini-14, however, is a moot point, as even though it is marked ".223 Rem." on the receivers, it can fire both 5.56mm and .223 rem without issue, as Ruger has cut its Mini-14 Chambers in a unique "universal"-cut chamber that is designed to fire either military or commercial cartridges. | ||
Here is a good example of the slight difference: | Here is a good example of the slight difference: | ||
Revision as of 07:20, 21 August 2007
Detonics 1911/ ICQ / .223 vs. 5.56mm chamberings
Working on getting you a Detonics 1911 (A1 variant denotes a curved Mainspring housing, slightly larger controls and in this case I cannot tell if a detonics is an "A1" variant or not. It could also be a Series 70 or 80 mod; I'll find out more). I mostly work on Springfield Armory, IMBEL, Kimber or Colt variants. But, here is what I found:
Check these sights on the Detonics line of 1911's out, they should help,
http://securityarms.com/20010315/galleryfiles/0900/903.htm
http://www.modelguns.co.uk/detonics_combat_master.htm
http://www.detonicsusa.com/firearms/streetmaster_lg.gif
http://www.sightm1911.com/lib/history/detonics.htm
http://www.biggerhammer.net/detonics/detonics.com/exp_view.jpg
http://www.gunblast.com/WBell_DetonicsCM.htm
http://www.handgunsmag.com/featured_handguns/master_121305/
When you get a chance, also check your ICQ, I added it to the list and sent an authorization request.
All Ruger Mini-14's are chambered in ".223 Rem" (as exactly etched on the receivers. I have a Police-turn-in GB and can take a Screenshot if you need me to). There is a difference (look up SAAMI or Mil-Spec. 5.56mm is slightly larger. They both use the exact same casing dimensions, though the 5.56mm grade are usually more regularly annealed and tempered. 5.56mm are also a bit "hotter", which is where the military comes in. .223 was developed by Remington Peters, and adapted by the Military (who uses metric now) as the 5.56mm. If a rifle has "5.56mm" stamped on it, rest-assured it can fire either 5.56mm or .223 rem without a problem (so long as the ammo is quality). If a rifle has ".223 Rem" stamped on it, usually you can only use .223, as the hotter pressures created by the 5.56mm and slightly different bullet profile (not cartridge, just bullet) can cause problems. The Ruger Mini-14, however, is a moot point, as even though it is marked ".223 Rem." on the receivers, it can fire both 5.56mm and .223 rem without issue, as Ruger has cut its Mini-14 Chambers in a unique "universal"-cut chamber that is designed to fire either military or commercial cartridges.
Here is a good example of the slight difference:
http://anonymouse.org/cgi-bin/anon-www.cgi/http://www.ammo-oracle.com/images/556cham.gif
Check
for more info on the subtle variances between the two chamberings.
--Kyro
Subtleties of AK Variants
The only reliable means of telling a AKMSU and an AKSU-74 (AKA AKS-74U) apart are to look at the curve rate of its 30rd magazine; to look at comparative bore-diameter (usually not possible from screenshots), or to see the cartridges it is firing up close (definately not possible from a screenshot, and also movies generally use star-crimped blanks and blank-adapted firearms).
In the instance of A Man Apart, you have an AK Carbine of some type, where a "Krinkov" type handguard is present (Black), and a waffle-pattern magazine with a 7.62x39 signature curve in it (It could be Bulgarian, East German or U.S.A. ProMag in manufacture). AK furniture, for the most part, is interchangeable. A pistol-grip from an AKM will work on an AK-74 and vica-versa; same with handguards, FCG's, butt-stocks, etc... Some muzzle-breaks are the same style too (not necc. bore dia. or thread-pattern), as seen in that "Krinkov" style AK Carbine. I've even seen AK-74 styled Muzzle-breaks on AKM's and AK-103's, so it's not unique to 74's.
The only REAL difference between the functional aspects of an AKM and AK-74 are the bolt-faces, magazines and bore/chambers. Most of the rest of the functional aspects are nearly identical, or identical (enough to be swapped). With some variance in bakelite furniture and certain muzzle-breaks and/or flash-hiders, they are functionally the same firearm, simply chambered in two different cartridges.
Point being, with simple tools and some know-how, ANYONE can modify an AK to their liking. The only real way to tell on screen, at least with an AK is the curve of the magazine. Slightly-Curved Magazine = AK-74 in 5.45x39mm or a SAR-3 equivalent (*.223/5.56mm Variant AK from Romania; Bulgaria also makes an SLR-106 type in .223/5.56mm AK Variants. The .223 AK variants use the 5.45x39 mags with a swapped-out follower to accept the cartridge profile of .223 Rem)... Deep-curved Magazine = AK-47, AKM, in 7.62x39.
And I wouldn't even call it an "incident", rather just an example of clashing info on a firearm. A Man Apart wasn't THAT great of a movie anwway (I'd give it 7 out of 10). I don't think it'd be worth my time to keep things accurate to just have my contributions deleted. By all means, if my formatting is not clean or the layout desireable, correct away; this is NOT my site. But I will not post ANYTHING on database sights like this unless I was certain my info was certifiably correct. I do make mistakes though, and if anyone believes I am mistaken, I wish to be called out on it.
I don't want to sound effete, but I have lots of experience building Romanian GP-75's from de-milled parts (Romanian National Guard AKM's chopped up and shipped to the U.S.), and have fired many different builds from different country kits (Polish, Hungarian, Yugoslavian, Bulgarian, Romanian, Russian/Siaga, Egyptian/Maadi, Chinese/Norinco). I have also built a few Hybrid-Stag/Bushy/RRA AR's and Metric FALs (Mostly IMBEL) in my day. Not to mention several other projects with 1911's.
And It wasn't that big of a deal dude, I was just trying to dileniate the extreme variety inherent in Kalashnikov variants. The only way to tell for certain is to handle it up close, but there are "Easy tells" on screen that give away a firearm's identity. I just don't like getting into pissing matches over who's right; no one wins in a pissing match. It was late and I just gave up changing or adding anymore to "A Man Apart" anyway. My PC was pissing me off and the screen-shot function on my DVD player was not working so well (look at the M4 Screenshot from the movie; some weird graphical glitches going on). I think my GC may be over-heating.
Either way, I'm going to have to let someone else finish it. I may pop in from time to time and add things here and there, and offer any wisdom that I may bring to bear; should it be needed. I don't know everything. I know a good deal, but still have tons to learn, so hopefully I can still learn stuff by checking in here and there.
--Kyro
Nice
Orca, nice catch on the Colt 9mm Submachine Gun - I'd never seen it before and assumed it was a 9mm AR-15. Do you know if the Colt 9mm SMG is actually fielded or if it's just used as a trainer? Thanks for all your recent additions to the site. bunni 06:34, 3 July 2007 (UTC)
Thanks.
Hey Orca, I just wanted to say thanks for putting the rest of the weapons up on the War of The Worlds page. I got pictures of all, but two of them, but I don't worry, I'll try to get them later.
Thanks
Thanks for the tips, I'll be sure to get Tim Robbins' shotgun too. And thanks again for your help.
WoTW is done.
Hey Orca, I got the rest of those shots, be sure to tell me if I got the right ones. And thanks again for the help.
Sorry
Sorry about that, I uploaded a new image of it, tell me if I got it.
Thanks
Thanks, I figured that had to be it. That should be everything now. I think I'm going to take a short break to think of a film to do next.
M16 rifle series
Nice work on the page - it's much cleaner now. bunni 19:17, 16 July 2007 (UTC)
Splitting M16 and Beretta 92 up
Someone suggested splitting up the Beretta 92 page into its variants, when I started the site there really wasn't enough content to do so but it might make sense now to do so for both the Beretta 92 and the M16 series - what do you think? bunni 22:32, 17 July 2007 (UTC)
- I'll leave it up to you then, when and if you think the 93R is ready for its own page feel free to do it. I'm going to come through this weekend and do some quality control work on all the new pages, get the formatting uniform again. bunni 22:54, 17 July 2007 (UTC)
No problem
No problem, I'm not going to let my favorite pistol's page be a mess, plus quite a few of the pages on this site need to cleaned up. And sorry that I deleted the # on the links, I didn't know what they were for.
Okay
Thanks for the reminder, I'll be sure to tag my screenshots later.
Sig P220 Merge
Good idea - copy the content over to one page and redirect the rest if you get a chance, if not I can try and take care of it later. bunni 19:55, 19 July 2007 (UTC)
Wikipedia article
No relation to the article, honestly I've never seen it - was it very complete? If you have some connections at Wikipedia an admin can provide you with a copy of a deleted article - that could be a treasure trove of new articles for us. The Wikipedia links I was creating to the imfdb on the gun and movie pages were just recently all tagged as link spamming and removed so my account is worthless on Wikipedia at the moment. Also, I think it was Alienqueen that suggested we create some admins to help block users vandalising the wiki - I'm all for that, you and alienqueen are the only ones I'd trust with admin status though. Let me know if you're up for it and I'll figure out how to upgrade your accounts. bunni 00:54, 21 July 2007 (UTC)
Digg
I submitted the Saving Private Ryan page to Digg - can you digg it? http://digg.com/movies/A_visual_guide_to_the_guns_of_Saving_Private_Ryan bunni 18:29, 21 July 2007 (UTC)
Redirect
Hey Orca, I would like to know how to redirect a page? Thanks. Alienqueen11.
my Email Address
Okay I understand, here it is my Email Address:
Apache0022003@yahoo.com
Thank you very much Orca.
Cover and Poster Categories
Sounds good, I'm still trying to figure out how to use dvd covers in the browse by movie section.
How about [[Category:Poster]] and [[Category:CoverArt]]?
Poster and Cover Art
Good call, Poster and Cover Art works.
Re: Screenshots
You got it buddy, I've started to download The Matrix Reloaded, I'll suffer through it for you. :) bunni 22:12, 28 July 2007 (UTC)
Images
Sorry, I don't have the dvds to get pictures from those movies, but I plan to get more dvds eventually and fill in the pictures once, But I'll try my best until then.
Image
Yeah, I'm thinking it's some kind of Glock too, but the handle has me wondering. I'll have to to do more research. Alienqueen11.
You're now a Sysop, Congrats!
Thanks for all your efforts so far, I finally got the chance to research how to set user privileges and made both you and Alienqueen11 Sysops. You can now ban users, delete and undelete pages, and revert pages to previous versions. Thanks much! Best, Chris WikiSysop 23:30, 30 July 2007 (UTC)
Good News.
Hey Orca, I got some good news for you, I can fill in Bad Boys II for you now because I found a Way to get rid of the black bars that are in widescreen movies. Alienqueen11.
Yep, I'm going to do a quick Snakes on a Plane article first then I'm going to get right on it.
Question
Were in the Freeway chase scene did you see the G36K? Alienqueen11.
Okay, thanks. I'll look there.
Is this it?
Is this it right here?:
Alienqueen11.
screenshot help
I uses CyberLink Powerdvd for my screenshot, but I can tell you it's usually a button called Capture Frame. Alienqueen11.
Re: Screenshot Help
Yeah, it even tops Black Hawk Down, I can't believe how many screenshots I took today! And I'm afraid I can't find your G36K, there is this other part were a DEA agent fires a machine gun out of the passenger window of another black Bronco, but I couldn't seem to identify it. And by the way good luck finding out how to take screenshots.
hey
Hey this is my first try at editing anything so let me know if I'm doing something wrong, OK.
Properly Categorize Images ?
When adding new images how do I properly categorize them. I'm, I suppose to put text in the summary box?Gunner313
Thanks
Hey Orca, I know I probably should have said this sooner but thanks for putting the pages I make up on the gun pages, I highly appreciate it. Alienqueen11.
Question
What's with you and the images lately? Nothing personal, just a question. Alienqueen11.
RE: Question
Oh okay, there's really no problem with it. I'm just more used to the side by side comparison thing. Alienqueen11.
RE: Thanks
No problem, glad it helped somebody. I still have many Dawn of the Dead screenshots to upload, and it looks there's still quite a few guns in there that are going to appear on the site for the first time. Alienqueen11.
oops
My mistake on the BHD 1911 - I was thinking the guy that made the Tokarev ID forgot to delete the 1911 part, I didn't even read it and totally forgot the Delta guys had them bunni 02:27, 5 August 2007 (UTC)
Re:Underworld MP5 ID?
Looks like you're, I took a closer look at it, and it seems to have a telescoping stock. When I first seen it, it looked like his sleeve was covering up part of the stock. I'll fix it right away. Alienqueen11.
Re:Awesome work
Thanks, I'll be sure to put in anything I find. Alienqueen11.
RE: Mystery Pistol.
That is Murtaugh's Smith & Wesson 5906, I'm putting it up right now. Alienqueen11.
There you go
There you go, Orca, that should be everything for Lethal Weapon 4. If there's anything else, be sure to let me know. Anyway, I'm going to go to bed now, so have a good night. Alienqueen11.
Re:M41A Pulse Rifle Info
Thanks, I will be sure to include that in the External links. And yeah, I got pictures of the handgun you mentioned, and also this is why I call myself Alienqueen11.
Aliens
I threw a picture in use it if you want.
Re: Aliens
You're right, it has to have been created from an M16. Alienqueen11.
Thanks
Thanks for helping me with Aliens, it's all finished now. Alienqueen11.
re pictures
I have saved pictures from everywere on the internet for a long time, I am a huge gun nut and movie buff. Most pictures come from gun sites and gun forums. Some pictures came from a webite that doesn't exist any more gunsinmovies.com. That site had so many mistakes and they would never edit it.
Thanks
Thanks for identifying one of the Miami Vice weapons for me. Alienqueen11.
Re:Miami Vice Sniper Rifle
I say go for it, I see some of it's qualities in the Screenshot. And after all I, it matches the variety of guns in the movie. Alienqueen11.
Identification
Hey Orca, do you know what kind of grenades these are? Alienqueen11.
Error creating thumbnail: File missing
Re: Identification
It's okay, Orca. I'll just list it as an unknown. Alienqueen11.
King Kong
I'm going to get pictures from King Kong for you, I got one of the Luger which I just put up. I placed it at the bottom of the weapon picture becauise I figured you would like it like that. Alienqueen11.
Re:Thanks
No problem, I enjoyed this movie too. And thanks for commenting on my screenshots. Also, I found this Cannon thing that be was being used by the soldiers too, do you know what is?
Re:Thanks
That's Okay, I'll look it up. And I'm watching the Patriot Games too, If I see anything I will be sure to list it. Alienqueen11.
Re:Instant Messenger
Yes,I have one on Aim, how would you like me to give it to you. Alienqueen11.
Spam
Hey, Orca, would you consider this spam?
http://www.imfdb.org/index.php?title=Wow&rcid=10174
Alienqueen11
Thanks
Thanks, I blocked this same guy for only 2 hours earlier hoping he would learn from it, and told him to take his stuff to the forums, but he didn't listen. Anyway, I was going to block him once it was confirmed as spam, but you got him, so thanks. Alienqueen11.